Filter By:
BMX
$6.00
$29.99
80% Off
The SNAFU Mobeus Brake Cable Detangler is an extruded and CNC-machined billet alloy brake component designed to work with most Gyro Brake set ups.
Specs:
AstroGlide Teflon bearing
Thin profile increases cable pull
Extra-deep cable ball receptacles eliminate cable pop-out
Snap ring located on the underside
Will not pull apart even under heavy braking forces
Weight: 1.2 oz
$83.99
Chad Kerley signature top load stem
CNC machined 6061 T-6 alloy construction
50mm extension
30mm stack height
22.2mm barclamp / 1-1/8" steerer clamp
Countersunk top surface for flush mount compression cap
10.9 oz
$9.59
$47.95
80% Off
Mid BB bearing kit featuring sealed bearings, 49mm wide alloy tube spacer and alloy spacers to fine tune chain alignment.
$24.00
$119.99
80% Off
The Eclat Blind Driver Kit either replaces your worn-out free coaster driver or converts your Eclat Blind hub to a cassette. SDS switchable left or right side drive. Polymer DU bushing for longer life. Includes Ratchet Ring and C-Clip. To fit only Eclat Blind hubs.
$9.20
$45.99
80% Off
Universal hub guard from Division that fits practically any rear hub with a 14mm axle or 14mm shoulder. Full CNC 7075T6 Alloy. 14mm CrMo insert washer to avoid thread binding. 57 grams or 2.10 oz. Suits non-drive side only.
$2.80
$13.99
80% Off
Replacement plastic sleeve for the Dan Paley signature Rude Tube peg.
Sold singly.
$22.99
Material: premium quality 7075-T6 alloy topbolt plus washer
Size: M24 x 1.5mm pitch (fits to 2011/ 2012/ late 2013 and 2014 forks)
Weight: 33g (1.12oz : 0.07lbs)
$48.00
WeThePeople's Helix Rear Driver Guard protects the driver on your beautiful Helix hub during grinds. Made from 7075 aluminum with a tough inner steel core, this guard perfectly fits the drive-side of your Helix rear hub. Grind with confidence!
$39.00
Protect your beautiful Helix hub on grinds with WeThePeople's Helix Rear Hub Guard. Made from 7075 aluminum with a tough inner steel core, this guard perfectly fits the non-drive side of your Helix rear hub. Grind with confidence!
$94.99
WeThePeople's Socket Pivotal seat post is made from 6061 aluminum for a perfect blend of strength and weight savings. It works with all Pivotal seats and comes in the perfect color and size to match your bike. Plus, there's a 17mm socket head built into the bottom of the post for park-side adjustments to your wheels.
$13.95
A replacement dual cable stop for bikes with a dual cable gyro setup. Fits most popular frames with removable brake mounts and cable stop.
Product Specifications
- Type: Single Screw
- Includes: Cable Stop and Screw
- Weight: 0.5oz
$16.95
Clean and simple, this fork cap bolt fits most modern forks on the market. CNC machined from 6061-T6 aluminum, providing strong threads and Allen key slot. This fork cap installs with a common 6mm Allen wrench.
- Thread type: M24×P1.5
- Thread Length: 15mm
- Weight: 0.7oz
$13.99
Single screw type removable gyro tabs. Fits most BMX frames with removable headtube gyro tabs.
Product Specifications
- Type: Single Screw
- Includes: 2 Tabs and 2 Screws
- Weight: 0.5oz
$22.95
No frills, affordable, durable, plain and simple. The Mission Strafe pegs are a perfect 4.5" long, and include an adapter for use with 14mm or 3/8" axles. Go get your grind on!
- Sold individually
- Material: Steel
- Weight: 11.0-ounce
$29.95
The Targa peg features a super sturdy steel core covered in a durable nylon sleeve, allowing for grinds on unwaxed ledges and aluminum rails! Once you've ground through a sleeve, simply slide on a new Targa Peg replacement sleeve and get back to shredding! Sold individually.
Product Specifications
- Length: 4.5" (114mm)
- Diameter: 40mm
- Sleeve Material: Nylon Composite
- Core Material: Steel
- Size: 14mm (3/8" adapter Included)
- Weight: 9oz (each)
$14.95
Replacement nylon sleeve for the Mission Targa peg. Sold individually.
Product Specifications
- Compatibility: Fits Mission Targa Peg Only
- Material: Nylon Composite
- Weight: 2oz
$43.95
Our updated removable brake mount kit includes everything you need to attach brakes to your Kink frame. This through-bolt style brake mount design fits late 2016 and newer Kink frames, as well as several other popular brand BMX frames. The kit includes brake mounts, brake mount bolts, cable stop, and barrel adjuster.
TECH SPECS
- Includes: Brake Mounts, Bolts, Cable Stop, and Barrel Adjuster
- Features extended bolt-in mounts, fits 2016 and later Kink frames, and fits with most popular BMX brands.
- Weight: 1.5oz
$98.95
The Kink Eastman full guard sprocket was designed to take a beating, and its built-in guard will protect your chain in the process. The machined crank arm reliefs create proper clearance for all popular cranksets, and the guard offset accommodates all chain widths, which gives the Eastman sprocket maximum compatibility. Its technical design creates a clean and symmetric aesthetic and provides massive strength where it’s needed. Two rotation positions extend the life of the Eastman’s built-in guard even further.
- Material: Fully CNC Machined 6061-T6 Aluminum
- Thickness: 12.5mm Overall (8mm at Spindle)
- Compatibility: 19mm, 22mm, and 24mm Spindles
- Weight: 5.3oz (25T)
$85.95
The Kink Myriad Gyro features a fully CNC machined body, made from 6061-T6 aluminum. The low stack design increases cable pull, and the inner nylon bushing provides a smooth, maintenance-free spin. The Kink Myriad gyro uses a knarp-less design and works with most standard gyro cables.
TECH SPECS
- Material: 6061-T6 Aluminum
- Bushing: Smooth nylon
- Weight: 1.1oz
$18.95
Replacement high-impact plastic guard for the Cinema Beta sprocket.
- Size: 25T
- Material: High-impact plastic
- Weight: 2.1 oz
$29.95
The C4 peg consists of a lightweight 6061-T6 aluminum core with a durable and replaceable 4.33" long nylon sleeve, allowing for smooth grinds on the roughest of ledges. Sold individually as a 14mm peg with a 3/8" adapter.
- Material: 6061-T6 Aluminum Core w/Nylon Composite Sleeve
- Size: 14mm with 3/8" adapter included
- Length: 4.33" (110mm)
- Diameter: 40mm
- Weight: 5.4 oz
$12.95
Replacement nylon sleeve for the Cinema C4 peg.
- Material: Nylon Composite
- Length: 4.33" (110mm)
- Diameter: 40mm
- Core sold separately
$39.95
The signature Dak pegs feature a super strong chromoly core and a long-lasting nylon sleeve for smooth grinds on the roughest ledges and rails. The exclusive cog design increases the core's end thickness, making this peg even stronger than traditional plastic pegs while preventing the peg sleeve from rotating at the same time. With Dakota Roche's name on it, you know they can take a beating! Sold individually as a 14mm peg with a 3/8" adapter.
- Size: 14mm (3/8" adapter included)
- Length: 4.5" or 4.75"
- Diameter: 38mm
- Weight: 7.6 oz (4.5")
$9.00
$44.99
80% Off
Snafu Spanish Bottom Bracket is a smooth rolling, lightweight and durable bottom bracket designed to function with frames that have a bottom bracket internal diameter of 37mm.
Supplied as pictured, Bearings, spacer & shim washers
Features:
Material: Alloy
Bearings: Press Fit
Spindle Hole Diameter: 19mm
Cup Internal/Bearing Outer Diameter: 37mm
Bottom Bracket Standard: Spanish
Weight 135grams
Page 1 of 1