Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Fenders

$41.99
Original equipment replacement fenders for your ride. Keep yourself and your gear clean and dry with a stylish fender. PRODUCT DETAILS - Size-specific fit for original tire spec - Stays and hardware sold separately - Length: Fender-end (BB side) to middle of slotted seatstay mount hole—316mm - See your bike's specific product page for compatibility
$59.95
This fender kit is specifically designed for SCOTT Road Addict and Speedster Disc 2022 frames featuring integrated cabling. Simple to mount, the system utilizes the dedicated seat stay bridge on the rear with front mounting on the caliper bolt. - MATERIAL: Polycarbonate / Nylon with glass fiber / Steel
$29.99
Our hugely successful fender range is now expanded to include newer models. This version is specifically designed for the latest generation of FOX 34 forks. The fender mounts directly to the fork using two screws in the crown (no zip ties here!) Integration at it's finest, now with added mud protection compared to the first generation with additional seal protection thanks to the side walls. 2 Torx screws and Torx Tool included for installation.
$74.99
Mudrocker Rear Fender for MTB protects you AND your suspension and linkage from water and mud. Provides excellent coverage on 27.5, 650b or 29er wheels with a maximum tire width of 3.0" The fender attaches to the seat stays with hook and loop straps (or cable ties if perferred). With the included frame adapter pads, user can adjust the angle of the fender. The included rear extender can be snapped on and used for extra protection in the bottom bracket/derailleur area. Perfect companion with the Mudrocker Front Fender. (If you lose your Adapter Pads or your Extender, they are both sold separately as well.) - Measurements: 840mm - Weight: 172 grams - Made in Germany
$29.99
No matter the conditions, stay dry and clean with SKS's X-Tra Dry rear fender! It's super light and nearly unbreakable so you know it's ready for the miles, on road and off. Plus, it works with most bikes thanks to its easy-to-adjust seatpost mounting strap.
$32.00
- 3-bolt mounts make for easy installation - Designed to integrate seamlessly and look pro with RockShox branding - Compatible with MY22 Pike and Lyrik models
$31.00
Don't let the weather get in the way of adventure. The RockShox branded ZEB short fender is designed to keep you dry and clean when the weather turns. It can be easily installed at three points and looks as if your fork and fender are one, leaving your friends wondering why they are still messing around with zip ties. - 3-bolt mounts make for easy installation - Designed to integrate seamlessly and look pro with RockShox branding - Compatible with all ZEB models
$54.99
The FRX (Front Race) fender was designed with the help of World Cup and Enduro World Series riders wanting max mud and spray protection with zero faff. Measuring 435mm in length the FRX provides awesome mud/spray stopping performance without breaking the bank. - Fits all wheel sizes: 26", 27.5", 27.5+" and 29" wheels with tires up to 3 inches wide on a 'boost' fork - Designed and made in the UK from 100% recycled black polypropylene - Weight: 78g
$57.99
Following the tried and tested tire-hugging design of our MTB Mudhuggers, the GravelHugger is designed to fit most fork + wheel + tire (up to 50mm wide) combos. To reduce single-use plastic waste, and make fitting and removing easier, the GravelHugger is supplied with nitrile O-rings (70mm sizes for flat blade type and 50mm for traditional round steel forks). Zip ties (sold separately) can be utilized if you'd prefer to fit and leave them on at all times. - Suitable for 700c (Max tire width 42mm) and 650b wheels (Max tire width 50mm), depending on wheel/tire/fork combination - Designed and made in the UK from 100% recycled polypropylene - Includes Helitape and nitrile O-rings - Length: 490mm - Width: 60mm - Weight: 75g
$54.99
Following the tried and tested rear Mudhugger design, will fit most bike frame seat stays and is designed for tires up to 50mm wide. The Rear GravelHugger is designed to be attached to the bike with zip ties as these afford the most secure way to fitting. However, it can also be attached utilizing hook and loop straps (sold separately), making removing and refitting easier. - Suitable for 700c and 650b wheels, Max tire width 50mm (depending on wheel/tire combination) - Designed and made in the UK from 100% recycled polypropylene - Includes Helitape and zip-ties - Length: 560mm - Width: 55mm - Weight: 200g
$84.99
Building on the award-winning, tried and tested Rear Mudhugger design, the new MK2 fender has added 3 significant improvements: 1. Now attaches with reusable velcro straps to make fitting and removing a matter of seconds 2. Where the fender 'sits' on the seatstays we have incorporated rubber inserts which aid grip and improves damping 3. A new push fit BB extension piece, to protect the BB area from debris build up. This has been designed to be as thin as possible so that it can be easily trimmed to suit most bike rear triangle designs The MEDIUM version is designed for bikes with a seatstay angle from 34 degrees down to 27 degrees. Can be fitted to 'most' bikes with disc brakes, even with external cables and hoses. - 690mm long x 105mm wide Comes supplied with: - x2 helitape sheets - x4 velcro straps - x2 rubber damping strips - x1 BB extension (230mm long x 80mm wide) - Designed and made in the UK from recycled polypropylene - 280g (w/o fittings)
$66.99
The new Shorty EVO bolt-on fender is designed around the latest FOX 36 and 38 forks, to avoid the problem of the crown hitting the mudguard at full compression (minimum Fork Offset: 44mm). Fender bolts directly to the back of the fork brace. Supplied with rubber pads, bolts, washers, and hex key to install to your FOX forks. Compatible with older (2017) onwards FOX 34 & 36 forks that have bolt holes in the brace. Also compatible with the fork brands below (separate adapter kits are required): - Rock Shox Zeb - Rock Shox Recon Gold or Silver 35 - DVO Onyx SC, Sapphire, & Diamond - Ohlins RXF 38 (2019+) & DH - Total length: 390mm (Rr extension 255mm, Fr extension 105mm) - More mud clearance - No more crown fouling at full compression - Stiffer, optimum length, not too short, no longer than needed - Designed and made in the UK from recycled PP - 100g
$49.50
The new EVO fender was designed around the latest FOX 36 and 38 forks, to avoid the problem of the crown hitting the mudguard at full compression. The Shorty EVO Ziptie fender attaches directly to the fork with the supplied zip-ties. Compatible with most forks other than models with reverse arch. - Total length: 390mm (Rr extension 255mm, Fr extension 105mm) - More mud clearance - No more crown fouling at full compression - Designed and made in the UK from recycled PP - Strong enough for DH racing at the highest level - 100g
$109.99
Keep dry on your Electra Townie Go!
$66.99
Functional. Fashionable. Fenders. Keep you and your threads clean and dry by adding stylish fenders. Personalize your ride with an Electra graphic or solid color fender set.
$84.99
Functional. Fashionable. Fenders. No one wants that wet stripe on their back. Keep yourself and your gear clean and dry with a stylish fender. - Original equipment replacement fenders for Electra bikes - Color matched for direct compatibility
$3.69
• Disc brake adapter for NCS fenders • Makes NCS fenders better fit disc brake bikes
$94.99
Ride in any weather The Bontrager NCS fender is everything you want in a fender. It installs in seconds, is available in a variety of sizes to fit various bikes, and offers full coverage to keep you dry. The no-cut design includes everything you need for easy installation and it even comes with an integrated Blendr rear light mount. Product details - Fully assembled fenders that install in minutes - Integrated rear Blendr light mount for use with Bontrager Flare lights - No-cut struts allow quick strut adjustment for proper tire clearance - Double-back strut on rear fender adds support and stability - Made of lightweight yet super-durable polycarbonate - Stainless steel hardware resists rust - Four sizes available to accommodate most bike and tire configurations
$99.99
Bikes have changed, and so should fenders. We threw traditional fender blueprints out the window and designed fenders that create solutions for problems that traditional fenders can’t. Our FLASCHEGUARD™ fenders are as close to ‘fit-everything’ as a fender can be. FLASCHEGUARD™ fenders are made from end-of-life water cooler bottles and use up to 75% less crude oil than virgin polycarbonate. For every tonne of FLASCHEGUARD™ material produced, almost a tonne of CO2 emissions is prevented. This means end of life plastic is kept out of landfills or incinerators. Because we’re trying to make every difference that we can, all of our stays are made from 100% recycled stainless steel. CONSTRUCTION FLASCHEGUARD™ recycled polycarbonate inner layer created from end-of-life water cooler bottles 3.2 mm 100% Recycled stainless steel support stays Stainless steel hardware MOUNTING SYSTEM FRAMERUNNERS™ mounts (x2) for use on suspension forks, aero forks, forks with disc brakes, forks without eyelets, or almost any other area where eyelets do not exist AXLERUNNERS™ (x2) for use on quick-release frames and forks without eyelets Spacers (5 mm x 6 / 10 mm x 3) for fine-tuning of bikes with disc brakes and eyelets, and for bridge height adjustment on frames with vertical mounting hole Mount to seat stay bridge and fork crown via included assortment of bolts and nuts, or use included zip-ties to fasten via the slotted bridge clamp Expanded selection of stainless steel mounting bolt lengths FEATURES Glossy inner layer finish resists dirt and grime build-up Extended fender lengths and duckbill mud flaps* keep feet dry, and eliminate rear spray 3M triangle rear logos enhance visibility Support stays spaced for maximum stiffness and frame compatibility Stays can be bent to accommodate unique mounting configurations Front fender equipped with safety stays to protect against objects becoming lodged in wheel Compatible with most Disc-Brake-equipped bikes Compatible with most Thru-Axle-equipped bikes Compatible with a wide range of suspension forks Wide range of tire compatibility Profile designed for optimal tire clearance Sold pre-assembled for quick mounting Lifetime warranty
$74.99
A sturdy, secure set of full-coverage fenders designed to fit more bikes than any fenders in their class. Easy to install and easy to adjust, Roadrunners are a favorite of both cyclists and shop mechanics. Weight: 652 g / 1.44 lbs (pair) Construction - Forged alloy RAINRUNNER Q/R mounts - 3M Reflex rear reflectivity - Virtually unbreakable Techniflex body - Stainless steel stays - Safety front stays Mounting System - Below: Mount to Quick-Release skewers via included AXLE-RUNNERS - Above: Mount to brake bridge and fork crown via included nut and bolt or with zip ties Added Benefit - Included proprietary AXLE-RUNNERS mount to almost any front or rear Q/R skewer to “create” eyelets - 3M Reflex rear logo enhances visibility - Support stays spaced for maximum stiffness and frame compatibility - Front fenders equipped with safety stays to protect against objects becoming lodged in wheel - Sold pre-assembled for quick mounting
$74.99
A sturdy, secure set of full-coverage fenders designed to fit more bikes than any fenders in their class. Easy to install and easy to adjust, Roadrunners are a favorite of both cyclists and shop mechanics. Weight: 752 g / 1.66 lbs (pair) Construction - Forged alloy RAINRUNNER Q/R mounts - 3M Reflex rear reflectivity - Virtually unbreakable Techniflex body - Stainless steel stays - Safety front stays Mounting System - Below: Mount to Quick-Release skewers via included AXLE-RUNNERS - Above: Mount to brake bridge and fork crown via included nut and bolt or with zip ties Added Benefit - Included proprietary AXLE-RUNNERS mount to almost any front or rear Q/R skewer to “create” eyelets - 3M Reflex rear logo enhances visibility - Support stays spaced for maximum stiffness and frame compatibility - Front fenders equipped with safety stays to protect against objects becoming lodged in wheel - Sold pre-assembled for quick mounting
$74.99
A sturdy, secure set of full-coverage fenders designed to fit more bikes than any fenders in their class. Easy to install and easy to adjust, Roadrunners are a favorite of both cyclists and shop mechanics. Weight: 606 g / 1.34 lbs (pair) Construction -Forged alloy RAINRUNNER Q/R mounts - 3M Reflex rear reflectivity - Virtually unbreakable Techniflex body - Stainless steel stays - Safety front stays Mounting System Below: Mount to Quick-Release skewers via included AXLE-RUNNERS Above: Mount to brake bridge and fork crown via included nut and bolt or with zip ties Added Benefit - Included proprietary AXLE-RUNNERS mount to almost any front or rear Q/R skewer to “create” eyelets - 3M Reflex rear logo enhances visibility - Support stays spaced for maximum stiffness and frame compatibility - Front fenders equipped with safety stays to protect against objects becoming lodged in wheel - Sold pre-assembled for quick mounting
$29.99
- Compatible with the majority of 27.5'' and 29'' suspension forks - 3.5'' wide, ideal for wide and Plus tires - 480mm length for optimal coverage - Made of polypropylene - Easy and secure fit with 6 zip-ties - 3 sets of stickers included: red, green and blue - Weight: 135 g
$29.99
- Fork mounted mudguard, perfect for mountain bikes - Mounts with a compression plug inside the steerer tube - Blade width varies from 60 to 73mm (2.4'' to 2.9'')
$55.99
- Deflector FM60 front and RM60 rear mudguard set - Easy, tool-less mounting systems - RM60 mounts on seatposts and is compatible with 26'' and 27.5'' wheels - FM60 mounts inside steer tube and is compatible with 26'' to 29'' wheels - Width: 60mm to 72mm
$14.99
- Easy to install and remove - Light and discrete
$25.99
- Design for road bikes - Installation and angle adjustment without tools - Made of ultra-resistant black polymer resin - Mounts onto the seat post - Blade width: 45 mm
$109.99
Genuine replacement parts. No one wants that wet stripe on their back. Details: - Keep yourself and your gear clean and dry with a stylish fender. - Accessorize your ride. Keep yourself dry. - Original equipment replacement fenders for Trek Crossrip+ bikes - Includes all necessary hardware and mounting stays - Made for Trek Crossrip+, but may fit other models - Alloy fenders are neutral black
$22.49
This flat-printed, origami-inspired polypropylene fender is ultralight, stylish, and quickly attaches and is ready to go when wet weather arrives. Simply remove from the package, punch out the shape and fold along the perforated lines. Reflective printing adds safety at night while multi-mount positions and hook-and-loop straps allows fender to fit a wide range of bikes. - Material: Polypropylene - Added Features: 3M reflective printing - Size: 31cm / 12.2" (in length) - Weight: 47g / 1.66oz (FS, on fork)
$19.99
This flat-printed, origami-inspired polypropylene fender is ultralight, stylish, and quickly attaches and is ready to go when wet weather arrives. Simply remove from the package, punch out the shape and fold along the perforated lines. Reflective printing adds safety at night while multi-mount positions and hook-and-loop straps allows fender to fit a wide range of bikes. - Material: Polypropylene - Added Features: 3M reflective printing - Size: 57.5cm / 22.6" (in length) - Weight: 75g / 2.65
Page 1 of 4 Next page