Cables

- Shimano brand casing with internal lining for optimized response - Brake: offered in a stiffer (M-System) for MTB, or a more pliable (SLR) version for road applications (can be used for either discipline depending on user preference) - Derailleur: (SIS-SP41) compressionless design pre-lubricated with silicon grease to decrease cable friction

SRAM's Guide Hydraulic Line Kit is a replacement hose kit for all Guide brakes.

Jagwire's Tube Tops are installed over your cable housing sections to provide a soft bumper to deaden the impact of cables hitting your frame while riding, minimizing rattles and protecting your frame's fine finish. They feature a split seam so they're easy to install by hand with no cable disassembly required. Just open the Tube Top's seam, put it on the housing where it's rubbing the frame, rotate the seam so it faces out and release. The Tube Top will stay in place and keep your bike quiet and safe.

Jagwire's Tube Tops are installed over your cable housing sections to provide a soft bumper to deaden the impact of cables hitting your frame while riding, minimizing rattles and protecting your frame's fine finish. They feature a split seam so they're easy to install by hand with no cable disassembly required. Just open the Tube Top's seam, put it on the housing where it's rubbing the frame, rotate the seam so it faces out and release. The Tube Top will stay in place and keep your bike quiet and safe.

Jagwire's Brake Noodles feature stainless-steel tubes with aluminum ends for durability and excellent performance. You get 10 of them for all your bicycle setup needs.

Jagwire's Cable Guide Stoppers are quality aluminum adapters that let you convert open-style cable housing stops on your bicycle frame so that they will hold 5mm-diameter standard cable housing sections.

Jagwire's Double-End Straddle Cable is a replacement straddle cable (also called a crossover or transverse cable) for cantilever brakes.

Jagwire's EZ Handle Single End Straddle Wire is a replacement straddle wire (also called a crossover or transverse cable) for cantilever brakes.

Many frames use internal cable routing for a tidy appearance and improved aerodynamics. In some cases, this can cause unwanted rattling sounds when riding over rough surfaces. Jagwire's Internal Housing Damper slides over brake and shift housing or hydraulic hose to reduce this noise. - 10 meter shops rolls can be cut to length to suit each bike's needs - 10mm outside diameter - Compatibility: 4.0-5.0mm brake housing, shift housing, and hydraulic hose

Jagwire's M7 Adjusting Barrel is a 7 x 1.0mm-threaded replacement cable-adjusting barrel. It's the right part for many older-style mountain bike brake levers. It comes in two models and is made of durable metal with a lockring for locking your adjustments. You get a pack of 10.

Inline adjusters make on-the-fly derailleur cable tension adjustments safe and easy. - 5mm - Stronger detent mechanism for use with brake housing - Perfect for mechanical disc brakes

Rotating S-hooks securely hold housing segments together and prevent undue noise and migration. - Two halves rotate 360 degrees - Compatible with 4mm or 5mm housings

Rocket II direct cable adjusters fit into Shimano STI shifters with external shift cable routing. - Rubber coated adjusting knobs for firm grip - Adjustable on the fly - 4mm

Sport level brake cables come in a variety of cable end setups to fit most bikes at a quality level well above normal OEM cables. - Slick cables are die-extruded for smooth operation - Pre-stretched - SRAM/Shimano mountain compatible cable end - Stainless steel construction resists corrosion - Single end cable features weld-cut for easy installation

Jagwire's Sport Slick Stainless Shift Cable is a high-quality shift cable made of stainless steel for excellent shifting performance, corrosion resistance and durability. It also comes in lengths to fit single and tandem bicycles.

Frame mounted barrel adjusters allow cable tension to be easily fine tuned. - Adjuster threading is M5 standard: 5mm OD, 0.8mm thread pitch - Bag of 10

Jagwire's Straddle Cable Carrier is for cantilever and centerpull brakes. It attaches to the end of the brake cable and is what the brake's straddle (also called transverse or crossover) cable attaches to. The Straddle Cable Carrier is made of light, corrosion-resistant and durable aluminum with a steel bolt. You get a pack of 10.

Jagwire's V-Brake Boot covers and seals the points where the the cable on your V-Brakes, linear-pull and direct-pull brakes enter the noodle. It's made of flexible rubber to seal the cable and help keep dirt, grit and moisture from entering. It keeps your cables and brakes working nice and smooth and ensures your cables last as long as possible. You get a bag of 10.

Rejuvenate the performance of your brakes with this convenient and valuable kit that includes all parts needed for installation. Kit includes lubed housing, pre-stretched stainless steel cables, ferrules, cable frame protectors, and cable end caps for front and rear brakes. - This convenient and valuable kit is the key to restoring your brake's performance - Compatible with nearly all braking systems - Stainless steel cables are 2750mm and 1700mm long, for front and rear brakes - Compressionless housing comes pre-lubed is 3000mm long - Kit includes Comp brake ferrules, cable frame protectors, and cable end caps - Included stainless steel cables are rust-proof and come pre-stretched

- Precision-machined cable ferrules for improved braking and shifting performance - A flat bottom on the inside prevents housing from pulling through ferrules. - 4mm ID for use with most shifting cables

- Aluminum cable crimps to prevent frayed cables - 1.2mm for shift cables or 1.6mm for brake cables - Silver aluminum - 250-count bottle

Shimano Dura-Ace BC-9000 Polymer Road Brake Cable & Housing sets reduce the sliding resistance to achieve lighter and quicker operation. - Dura-Ace grade SLR-EV Road brake cable set - Stainless steel for anti-rust protection - Low friction polymer material on the cable may cause slippage at the cable fixing bolt after initial pre-stretch for the cable is performed. Fur-like material from polymer coating will not affect the performance - Pre-lubed with special polymer compatible grease

These PTFE-coated, stainless steel cable and housing sets reduce the sliding resistance to achieve lighter and quicker operation. Includes: - 1400mm x 5mm housing x 1 - 800mm x 5mm housing x 1 - 2050mm x 1.6mm cable x 1 - 1000mm x 1.6mm cable x 1

Shimano XTR OT-SP41 Polymer Coated Derailleur Cable Sets

SRAM's Rim Brake Hydraulic Line Kit is a replacement hose kit for all road hydraulic rim brakes. - Compatible with SRAM road hydraulic rim brakes - Length: 2000mm

Original equipment hydraulic hoses for no-compromise brake performance. - Hose Use: Front, Rear - Black - 2000mm hose length - Compatible with SRAM road hydraulic disc brakes

SRAM's SlickWire MTB Brake Cable Kit is the perfect kit to have on hand to fix broken cables and a great upgrade, too. You get excellent stainless-steel cables, slippery lined 5mm-diameter housings, aluminum ferrules, and frame protectors.

SRAM's SlickWire Road Brake Cable Kit is the perfect kit to have on hand to fix broken cables and a great upgrade, too. You get excellent stainless-steel cables, slippery lined 5mm-diameter housings, aluminum ferrules and frame protectors. - Weight: 99 grams (pair)

SRAM's SlickWire Shift Cable Kit is the perfect kit to have on hand to fix broken cables and a great upgrade, too. You get 2 excellent stainless-steel cables, slippery lined 4mm-diameter housings, and aluminum ferrules and frame protectors. - Weight: 99 grams (pair)

- Road bike-specific 1.6mm extra-long coated stainless cable - Front and rear brake - Disc compatible - 5mm compression-free reinforced housing with lubricated liner - Kit includes 2 frame protectors and short-nosed aluminum ferrules