Tools

- Freewheel remover for Shimano HG cassettes with center pin

Designed for 9 speed chains. Made of high-grade steel.

MW50 - 15mm pedal wrench and 14x15 box wrenches. MW60 - 15mm pedal wrench and hex 8x 10mm.

1/2" Dr. bit socket H10 for Campagnolo® B.B. 10mm bolt

Chain rivet extractor for 10, 11 speed chains. Chain pin guide with 1 spare pin.

- 2/2.5/3/4/5/6/8mm hex key wrench - Spoke wrench (3.2mm) - +/- screwdriver

10" Waterpump like box join pliers.

Designed for riders and home mechanics, it is an ideal and durable tool set. 1-Freewheel turner 1-15mm pedal wrench 1-Freewheel remover for Shimano® and other cassetees lockrings, W/center pin 1-Spoke wrench for 0.127" nipple (black) 1-Spoke wrench for 0.130" nipple (green) 1-Spoke wrench for 0.136" nipple (red) 1-Mavic® spoke wrench (yellow) 2-Phillips 2, Slotted 6 screwdriver 3-Tire levers 9-T/L handle hex set, size:2/2.5/3/4/5/6/8/10mm,Torx® 25

Torx Wrench sizes: #1: Torx T25, T30, T40 #2: Torx T10, T25, T30 TB-2638: Torx T25, T30, T40

- (2) Crank tools - (2) Double-ended wrenches - (1) Chain whip - (1) Master-link pliers - (1) Freewheel tool - (1) Cable cutters - (1) BB Tools - (2) Screwdrivers (-/+) - (1) Pedal wrench - (3) Tire levers - (1) Chain to

6- 25L bits w/holder, size: Phillips 1 & 2mm, Slotted 5 & 7mm, Torx 25 & 30mm. 3- 1/4”Dr. socket size:8 /9/10mm 1- Couple 1- L handle 3- Steel core tire levers 2- Hub cone spanner.13*14*15*16mm 1- Crank installation tool 1- Chain rivet extractor chain-shaped.lost-wax casting, for 8, 9, 10 speed chain, with 1 spare pin 1- BB wrench for use Shimano® Hollowtech & Truvativ® GXP® & FSA®, Campagnolo® 1- Freewheel turner(for 9 speed chains) 1- Headset wrench(32*36mm) 1- 15mm pedal wrench and 14*15mm box wrenches 1- Chainring nut wrench.w/crank cover wrench 1- 2 in 1 crank tool.for standard square type & Shimano splined octalink and ISIS 1- Cartridge B.B. tool for Shimano® cartridge B.B. & ISIS drive compatible. 1- B-shaped spoke wrench, size: 3.2/3.3/3.5/4.0 mm 1- Double-ended wrench 8*10mm 6- Hex key wrenches 2/2.5/3/4/5/6mm 1- 8mm hex key & 1/2”Dr. adaptor 1- Freewheel remover 1- Blow case

6" Diagonal cutting nippers

7" long combination pliers.

For 3.2, 3.3, 3.5, and 4.0mm nipples.

Commonly referred to as the "4th Hand". The Cable Stretcher pulls cables tight with ease.

Stiff and strong tire levers. Compact and lightweight.

TB-1938: Crown race setting system includes 1 x setting tube, 3 x 1" inserts and 3 x 1.125" inserts for installing the crown race, used on most 1" x 1.125" headsets TB-1939: Crown race setting system includes 1 x setting tube, 3 x 1" inserts and 3 x 1.125

- For 1.25" fork - Universal design to quickly remove difficult headset crown races

- Shockless and no rebound - Steel structure and includes steel shot

- Determines if dropouts are aligned and parallel to avoid bent axles or skewers - Long handles and comfortable grips provide you superior leverage for straightening any issue

TB-1901: 3mm x 0.5, for rear wheel drop-out alignment screws TB-1902: 5mm x 0.8, for water bottle, toe clip, fender and rack bosses TB-1903: 6mm x 1.0, for cantilever brakes and large fender bosses TB-1904: 10mm x 1.0, for derailleur hanger

Removes 4-notch BMX & single and single-speed freewheels. Use with 24mm wrench.

- For Shimano HG Cassettes - Use with 24mm and 19mm wrench or 1/2" ratchet wrench

Removes SunTour® 2-notch freewheels. Not recommended for SunTour® four to six notch freewheels. Use with 23mm wrench. TB-1035 can be turned with TB-8830.

- Set includes 2, 2.5, 3, 4, 5, 6, 8, and 10mm Allen wrenches. - Made from high grade steel and through hardened for long life. - Includes two-piece plastic carrying case

- Set includes one 8mm hex socket and ball-end wrench sizes from 4mm through 6mm. - Compact enough to carry on a ride. - Includes durable plastic wrench holder

-10, 8, and 6mm L-shaped hex wrenches for high-torque applications - Comfortable rubber grips - High-quality steel

Bit sizes: Hex 3, 4, 5, 6, 8mm. Comes with Super B case.

- High quality bracket rool, easily assemble the lockring of bottom brackets - Fits most lock-rings

- Guides a hacksaw to cut airfoil shaped seat posts up to 68mm or round tubes from 1" to 1.375" in diameter