Tools

For Shimano and Truvativ cranks. Use with a 6mm hex key.

Stiff and strong tire levers. Compact and lightweight.

1/2" Dr. bit socket H10 for Campagnolo® B.B. 10mm bolt

Double-ended to fit most slotted-type nuts, the other side is the tool to remove the dust cap out of the cranks, using a hex key you can easily install/remove the chaining bolts.

TB-1085: Removes Shimano® MF freewheels. Use with 21mm wrench or 1/2” Drive ratchet wrench. TB-1045: Removes Shimano® MF freewheels . Use with an adjustable” or 24 mm wrench. Available to work with TB-FW10 or TB –FW20 while disassembling. TB-1045 can be turned with TB-8830.

Removes SunTour® 2-notch freewheels. Not recommended for SunTour® four to six notch freewheels. Use with 23mm wrench. TB-1035 can be turned with TB-8830.

Hex Key Wrench available in two sizes: 2/2.5/3mm and 4/5/6mm

Torx Wrench sizes: #1: Torx T25, T30, T40 #2: Torx T10, T25, T30 TB-2638: Torx T25, T30, T40

TB-1709 is a tapered brush for clean those hard to reach places such as frame and tire.

Heat treated and made to last. For 3.2, 3.3, and 3.5mm nipples.

- Forged 8 groove spoke wrench - For spoke tension adjustment on 10G-15G nipples

- High grade steel screwdriver - Ergonomically-designed grip

- Both metric and English - Readings up to 3m (10 feet)

TB-6617: Cotterless crank tool for Shimano splined octalink and ISIS, Use with 8mm hex key wrench and 15mm spanner. TB-6616: Cotterless crank tool for use with 8 mm hex key wrench and 15mm spanner.

-10, 8, and 6mm L-shaped hex wrenches for high-torque applications - Comfortable rubber grips - High-quality steel

For 3.2, 3.3, 3.5, and 4.0mm nipples.

Designed to hold socket to bottom bracket axle to prevent slippage during installation or removal. To be used with square tapered, Octalink and ISIS drive sockets in order to secure the tool to the BB during installation and removal.

Designed to help align brake calipers and pad gap.

TB-1901: 3mm x 0.5, for rear wheel drop-out alignment screws TB-1902: 5mm x 0.8, for water bottle, toe clip, fender and rack bosses TB-1903: 6mm x 1.0, for cantilever brakes and large fender bosses TB-1904: 10mm x 1.0, for derailleur hanger

- For Shimano HG Cassettes - Use with 24mm and 19mm wrench or 1/2" ratchet wrench

Various spoke wrenches for differing spoke sizes and companies.

Box Wrench with 8, 9, 10mm sockets

Removes 4-notch BMX & single and single-speed freewheels. Use with 24mm wrench.

For Shimano® and some of Shimano®’s disc brake system, SRAM®?SunRace®, SunTour®, Chris King®, and other cassette lockrings. With a center pin. Use with 24mm spanner.

Set of 3 tire levers with a steel core for extra strength.

T-Shaped wrench with Torx 30/5mm hex

TB-1065: For Shimano® cartridge B.B. & ISIS drive compatible. Use with 1/2” Dr. driver and 24mm wrench. TB-1065 can be turned with TB-8830. TB-1075: For Shimano® & lSlS drive compatible. Use with 1/2” Dr. air driver.

- For use with most Shimano hubs - Use with 24mm wrench or 1/2" Dr. wrench

2-in-1 chain wear checker and chain hook function.

- Set includes one 8mm hex socket and ball-end wrench sizes from 4mm through 6mm. - Compact enough to carry on a ride. - Includes durable plastic wrench holder