Storage

- Shop quality bicycle display and storage stand - Graphite ripple powdercoat over steel construction - Four-Point, Foam rubber end-Cap feet - 2 Piece design disassembles for space-Efficient storage - Standard and extreme models feature welded base construction (Extreme model accepts up to 3 inch tires) - Retail model features flat-Packed, Bolt-Together base construction - Fat rack features flat-Packed, Bolt-Together base construction and will suit tires from 3.8" To 5" with three width positions, 4.25", 4.75" And 5.25"

- Oversize hooks for large MTB tires and tall aero rims - Inside width of 75mm (2.95") and 150mm (5.9") tall inside the J-bend - 50mm (2") of machine threading with a thread size of 10mm x 1.5mm - Black vinyl coated - Includes two nuts

Shipping Charge

- Provides convenient bikes storage - Plastic covered hook to protect the rim's finish - Strong and stable steel hanger - Fitting screws included

- Convenient storage for any bike with elegant space-saving design - Welded construction with padded wheel hook - Maximum load: 40lbs

Being the middle child typically comes with some identity issues. This is not the case for our mid-range product. The CLUG Hybrid is completely comfortable with its role for tire widths of 33mm—43mm (1.3"—1.75"). Hybrid is perfect for commuter bikes and other mid-range slick tires. Hybrid can handle a bit of chunky tread, but if you have dirt grabbing knobs on your tires, you likely need our MTB version.

Bike Bag Storage Bag

The Willworx ‘CONNECTORS’ allows the individual Superstands to be connected in an unlimited number of configurations to suit every bicycle shop layout, size, and display area. They can be staggered to the right or left, side by side, back to back, etc. Some of the configurations are shown here. The CONNECTORS also allow the Superstands to be adjusted closer or further apart, as required for some bicycles with wider handlebars, or to position the bicycles closer where minimum floor space is available. Parking the bicycle with the rear wheel and staggered allows more bicycles to be on display.

The ever popular Superstand is also available in a multi-bike version. - 2 bike module is 80cm wide (with 40cm spacing between bikes) - The base comes fully welded as an assembly; simply push on the top hoops to the base uprights - Fits BMX 20" wheel size up to and including: comfort bikes, road bikes, MTB tires up to 60mm wide, and hybrid bikes with 700C wheels - Heavy duty, powder coated steel tubing constuction - Rubber feet caps at each end of the main tubing rails - Widely used in bicycle shops, providing clean, neat, non-intrusive bicycle displays - Use back to back as an island display, or end to end along walls - Can be positioned in various layouts and configurations to suit any shop display area

This super cool, super steady patented bikestand will hold any bike with a tire width up to 3.25". - Rubber feet keep it steady and scuff resistant - Looks great in any apartment garage or shop floor - Flatpack version is packaged in a retail box. It simply screws together and is ideal for retail sales For the shop display/welded version, see part # 196-108

This item clamps to the vertical tubing of the stand and is ideal for bicycle mechanics, both professional and amateur. This allows the bicycle brakes & gears to be adjusted whilst the rear wheel is off the ground. Ideal for BMX, racing and competition use. Simply, lift the rear of the bicycle into the frame to suspend the rear wheel.

Topeak's Handlebar Stabilizer is a useful addition to your Dual-Touch storage rack as it securely holds your front wheel and bar, making it easier than ever to work on your bike.

Elegant and functional, Topeak's OneUp is the perfect bicycle storage solution when space is an issue. It has a grooved, durable plastic tray and a molded rubber bar to keep your front wheel securely in place and it also boasts two storage hooks for your riding essentials and a rear wheel pad to keep your walls scuff free.

Topeak's TwoUp TuneUp Bike Stand easily holds 2 bikes up and out of the way. But, the best part is that it's solid enough to serve as a light-duty work stand as well! Made with tough aluminum tubing, the center pillar extends to almost 7 feet while the tripod base acts as a super-stable platform. The 2 included bike mounts swivel up to 30 degrees to accommodate sloping tubes and the lower mount includes a handlebar stabilizer to hold your bike while you're wrenching. Plus, this awesome stand has the capacity to carry up to 4 bikes and 158.7 pounds.

Topeak's Third Hook is the perfect addition to your TwoUp TuneUp storage rack. Get two of these babies and your stand can now hold 4 bikes, enough for the whole family!

The Thule RoundTrip Pro Storage Sleeve is a soft storage sleeve to keep the contents of your RoundTrip Pro bike case tidy when not in use.

Park Tool's Event Stand Add On Kit extends the length of the ES-1 Event Stand (sold separately) by eight feet. It includes one height-adjustable tripod upright, two 47” (119cm) support tubes, and one connector sleeve.

Super huge Storage Hooks are big enough to accommodate fat bike wheels/tires. • Plated and vinyl dipped for long, scratch free service • 470XX Machine thread including two nuts: • Inside to inside 125mm (4-7/8") • Height inside J-bend 150mm (6")

Super huge Storage Hooks are big enough to accommodate fat bike wheels/tires. • Plated and vinyl dipped for long, scratch free service. • 471 Wood thread including two nuts • Inside to inside 125mm (4-7/8") • Height inside J-bend 150mm (6")

Park Tool Storage Hooks are pefect for hanging bikes, wheels, etc. • Vinyl coated to prevent scratching. • Machine threaded - includes 2 nuts • Made from 7mm steel rod • Thread is a M8 x 1.25 44mm length

• Oversized hook for large MTB tires and tall aero rims • Inside width of 75mm (2.95") and 150mm (5.9") tall inside the J-bend • Made from 9.5mm wire • Wood screw thread is nominally 11.4mm outside diameter (15/32") with 7 threads per inch • Use a minimum of 11/32" drill size to pilot wood hole • Blue vinyl coated

• Park Tool Storage Hooks are perfect for hanging bikes, wheels, etc. • Vinyl coated to prevent scratching. • Wood threaded • Made from 7mm steel rod • For a pilot hole in wood, use a 1/4" or 6mm bit • Sold in pairs

Stylish and functional hook that mounts to your wall and holds the bike by the front wheel. - Powdercoat finish with dipped hook to protect the rim's finish - Includes rear wheel tray to protect walls

Lezyne Alloy Wheel Hook is a modern, industrial 3-piece bicycle storage system constructed from a durable CNC-machined aluminum. This includes a stylish wall-mounted wheel hook and two tire plates to prevent scuffing. The wheel hook features a rugged, anti-slip cover which secures the bike and safeguards its rim. A one-time installation allows for simple, space-saving bicycle storage for indoor spaces, garages, or wherever you prefer to hang your bike. It’s compatible with all standard bicycles—from BMX to downhill bikes—and can hold up to 70 LBS (32 KGS). Mounting hardware included. - Cnc machined plate and anti-slip rubber wrapped wheel hook - 3 pcs set - 8 pcs hardware included

- 3-Piece stainless steel pedal hook bicycle storage system - Compatible with all standard pedals: max pedal platform depth of 4.5" (114mm) - Holds bicycles up to 70lbs (32Kgs) with tires up to 3.0" (76mm) - Mounting hardware and wall plugs included

The Universal Strap quickly and easily creates a minimalist yet versatile on-the-bike storage solution capable of carrying tubes, inflators, multi-tools, and more. Featuring robust construction and a strong Velcro attachment, its textured, non-slip finish promises a firm and secure grip on everything it holds.

RackDock from Kuat. A sophisticated solution for storing your hitch rack. Easy wall installation and the ability to hold up to 100lbs keeps your hitch rack secure and out of the way in the garage, preventing damage to the rack, cars, and of course—bikes. - Supports up to a 4-bike rack (100 lb max) - All hardware included - 2" hitch and 1.25" hitch adaptor included - Magnetic faceplate

- Storage Hooks with machine thread and nuts & washers - Sold as a pair

- Swing-Bull Storage Rack - Foldable for out of way storage. - Hook angle adjustable to fit different style of frames.

Wheel "Two-Way" Storage Hook for wall or slat wall mount