Pedals

Built on the cutting-edge Speedplay Pedal System, Power Zero single-sided power pedals deliver reliably accurate power and cadence data in a race-proven pedal system. This powerful combination creates an unrivaled power pedal that helps cyclists optimize performance by providing the visibility, adjustability and efficiencies needed to break through to the next level. Pair with the Wahoo ecosystem of smart devices for a more full picture of your data and performance, and to track, analyze, share and improve. - Single-sided power metrics measure cadence from the left pedal; power is tracked and doubled to estimate total power output no matter where you are crushing watts, with lab tested +/- 1% power accuracy - Simple and intuitive Wahoo Fitness app offers guided instructions on how to install Power Zero's on any bike, calibrate the pedals for accuracy, and perform firmware updates - Simultaneously connect to three Bluetooth devices while broadcasting to an unlimited number of ANT+ devices Power Zero is built on on the dual-sided entry Speedplay Pedal System, which maximizes power transfer by putting your foot closer to the spindle. No more fumbling, fussing or kicking your pedal over; leverage a powerful take off when the light turns green and clip in with ease - Power Zero and the Speedplay Standard Tension Cleat create a secure connection and a streamlined profile. The two form a seamless integration that aids power transfer and increases aerodynamics. The slim profile cleat and rubber texture create enhanced stability when walking in your road shoes off the bike - The cleat can be positioned on the bottom of the shoe and adjusted fore-aft, left-right and rotationally, allowing between 0-15 degrees of float, allowing the heel to pivot around the center of the pedal. This range of motion in the foot, lower leg and knee increases comfort and enhances pedal efficiency - Uncompromised durability and minimal maintenance thanks to their stainless steel construction and triple-sealed bearing system Powered by a rechargeable lithium battery, Power Zero power pedals have a battery life with up to 75 hours, tested and proven to provide accurate power data across changing temperatures that you are sure to encounter while riding - Pair with the rest of the Wahoo Ecosystem compatible devices for the most connected training experience

- The ATAC 13/17° cleat works with all TIME mountain pedals. - Included with all mountain pedal models numbered "6" and higher - Release angles of 13 degrees or 17 degrees depending on how the cleat is set up on the shoe - Compatible with all two-hole cycling shoes.

- Developed for the TIME XPRO & XPRESSO road bike pedal range. - They allow angular and lateral freedom in order to respect the natural movements of your legs and joints. - You can also adjust the Q-factor (by switching the cleats) - The Bi-material brings more durability when walking with the cleats. - These cleats are the stock cleats included with all XPRO & XPRESSO pedals.

For cyclists seeking maximum power transfer but also a minimal amount of float, Shimano’s SM-SH12 Blue cleats are the answer. By placing the pivot point at the front, lateral sliding movement is eliminated. But these cleats still permit a small amount of angle change from the pivot point back towards the heel so that your foot is not completely locked in place. Features: - Occupying the middle-ground between Shimano’s Yellow and Red cleat options, the SM-SH12 Blue cleats have two degrees of float (one degree in each direction), allowing for a small range of movement while still delivering a high degree of pedaling efficiency. - Customizable: Seamlessly compatible with Shimano SPD-SL pedals, which allow you to adjust the spring force required to clip in and out of your pedals - Ease of Disengagement: Feature a 12-degree clip-out angle, allowing you to quickly get out of your pedals when the time calls Off-Bike Friendly: Cleat size and shape provide a stable walking platform and are less prone to clogging with dirt when off bike - Built to Last: Composite construction combines an injection-molded main body with grip-enhancing TPU tips that are durable and maintain long-lasting pedal engagement

- Large pedal platform - Lower platform height for pedaling stability - Robust retention claws provide smooth engagement and release - Customize the entry and release tension settings - Strong, durable chrome-moly spindle with 8 mm hex wrench mount - Sealed mechanism - SM-SH51 Cleat included - 1.0 mm cleat spacer included - Binding: Dual sided - Cartridge axle - Cleat retention adjuster - Average weight: 342g - Optional cleat: SM-SH56 - Pedal Type: Off-Road (SPD)

- Wide pedal-to-shoe contact - Lower platform height for pedaling stability - Integrated cage increases stability and control when not clipped in and protects binding mechanism against impacts - Robust retention claws provide smooth engagement and release - Customize the entry and release tension settings - Strong, durable chrome-molly spindle with 8 mm hex wrench mount - Sealed mechanism - 1.0 mm cleat spacer included - Binding Dual sided - SM-SH51 Cleat included - Cleat retention adjuster - Integrated cage - Cartridge axle - Average weight: 438g - Optional cleat: SM-SH56 - Pedal Type: Off-Road (SPD)

- Excellent Pedaling Efficiency - Optimized Balance Of Weight And Rigidity - Injection Molded Carbon Composite Body - Hollow Cleat Bolt - Efficient Power Transfer - High Stability - Extra-Wide Platform - Efficient Power Transfer/Durability - Reduces Flex And Pedal Body Wear - Stainless Steel Body Plate - Excellent Pedaling Efficiency - Smooth Rotation - 2-Ball Bearing, 1-Wide Roller Bushing - Reliable Durability Performance - Stable And Uniform Load Distribution - Wide Bearing Placement - Rider Tune - Customize The Entry And Release Tension Settings - Adjustable Entry And Release Tension Settings - Shimano 3-Year Limited Warranty - Average Weight: 224g - Shimano SPD-SL cleats included - Standard (52mm) - Wide (56mm)

With a wide contact area, the PD-ME700 pedals let riders focus on the trail ahead. Designed to work seamlessly with SHIMANO AM series shoes, the SPD trail pedals deliver enhanced stability over rough terrain. FEATURES - Wide, dual-sided platform improves pedal-to-shoe stability and power transfer - Integrated cage increases control when not clipped in and protects binding mechanism from impacts - Robust retention claws provide smooth engagement and release - Rider adjustable entry and release tension for individual customization - Chrome-moly spindle and low-maintenance sealed bearing cartridge axle

PD-EH500 pedals FEATURE - One side SPD, the other side flat - Light action binding makes frequent stepping-in & out easier - Better grip on flat side for wet condition BENEFIT - Convenient road touring pedal - Optimized for urban riding - Multi-condition - Best match with CT or MT shoes

These versatile pedals feature adjustable Shimano SPD bindings on one side and standard cages on the other: the perfect combination for riders who ride with cleated cycling shoes and also with regular shoes. With sealed bearings and chromoly axles, the M324s are durable and practical all-around pedals. - Weight: 533 grams (pair)

Shimano's M540s are race-ready clipless pedals that don't require a team budget. These rugged, light beauties feature dual-sided Shimano SPD bindings that are easy to enter and exit and deliver excellent power transfer and maneuverability. The bindings are adjustable for dialing in the perfect tension and these sweet pedals have an open mud-shedding design to prevent clogging. Plus, the M540s are built to last with chromoly axles and sealed-cartridge bearings. - 352 grams (pair)

The PD-M821 is a SPD pedal ideal for Downhill and Enduro. Its design prioritizes stability, bike control, and durability. With a wider platform and slim body, the PD-M821 provides support when landing a jump and clearance over rocks and roots. Its robust construction can take a hit, so you can trust its durability no matter how hard you ride. - The SAINT PD-M821 is a SPD Pedal Ideal for Downhill & Enduro: Top of the line SPD pedal for aggressive mountain bike riding and racing. - Rugged and Durable High Performer: Sturdy construction designed to take a hit and perform in all conditions. - Enhanced Stability and BIke Control: Wider contact area between foot and pedal for more support and stability when wearing All Mountain style shoes. - Thinner Pedal Body: Results in lower stack height for stable pedaling and improved clearance. - Grip Even When Unclipped: Four height adjustable pins per side for improved grip when not clipped in. - SM-SH51 SPD Cleats Included

When it’s time to update the flagship XTR pedals, we look at every detail under a microscope. Off-road racing demands speed, focus, and control. And that’s exactly what the PD-M9100 delivers. Increased drivetrain efficiency, an intuitive and seamless interface, and predictable steering and traction control are the benchmarks of the M9100 series pedals. The M9100 are the weapon of choice for WC racers worldwide. BETTER MUD CLEARANCE - Cylindrical contact area sheds mud even better for consistent stepping-in & out performance and rider confidence. ADDED EFFICIENCY + DURABILITY - Increased axle strength for long service life. M9100 comes in two axle lengths – 52 mm and 55 mm crank to pedal center. BETTER MUD CLEARANCE - Wider edge-to-edge contact area provides solid shoe-to-pedal interface, transmits power more efficiently for faster and more consistent acceleration, and better bike control.

When it’s time to update the flagship XTR pedals, we look at every detail under a microscope. Off-road racing demands speed, focus, and control. And that’s exactly what the PD-M9120 delivers. Increased drivetrain efficiency, an intuitive and seamless interface, and predictable steering and traction control are the benchmarks of the M9100 series pedals. The M9120 are the weapon of choice for WC racers worldwide. BETTER MUD CLEARANCE - Cylindrical contact area sheds mud even better for consistent stepping-in & out performance and rider confidence. ADDED EFFICIENCY + DURABILITY - Increased axle strength for long service life. M9100 comes in two axle lengths – 52 mm and 55 mm crank to pedal center. LARGER CONTACT AREA - The M9120 platform is designed for maximum shoe-to-pedal contact area without extra weight or rotating mass. Cage protects the binding and makes step in easy. BETTER MUD CLEARANCE - Wider edge-to-edge contact area provides solid shoe-to-pedal interface, transmits power more efficiently for faster and more consistent acceleration, and better bike control.

The highly durable PD-M9220 is a fully re-designed XTR-level trail pedal for aggressive enduro and all-mountain riding and racing. On climbs you’ll appreciate the enhanced efficiency thanks to its wider contact area. During descents you’ll relish the extra control, security and stability due to its raised platform and grip-enhancing traction pins that improve the pedal-to-shoe interface. • Pedaling Stability and Efficiency: Wide contact area improves pedaling efficiency • Enhanced Bike Control: Raised pedal platform and four adjustable traction pins increase control, especially when you’re not clipped in • Exceptional Durability: Robust outer cage protects pedal binding mechanism from rock strikes and other trail impacts • Superior Seals: Improved seal design ensures pedals spin smooth and true season after season • Easy Entry Cleats: Pairs with SHIMANO CL-MT001 cleats that feature multi-direction engagement, making it easier to clip in from any angle. Also compatible with existing SPD cleats • CL-MT001 SPD Cleats Included

Shimano's PD-R550 SPD-SL Pedals offer wide, stable platforms for great support and stability when you're out on the road. An extra-wide platform maximizes power transfer. Durable stainless steel tread plates reduce flex and pedal body wear. Wide bearing placement provides uniform load distribution for miles and miles of riding. - 310 grams (pair)

PD-R7000 NEW FEATURE - Carbon fiber reinforced resin pedal body - Wide contact area - 265g/pr (25g/pr lighter than PD-5800) BENEFIT - Optimum power transfer - Lightweight - Aerodynamic image - Color: CFRP - Average weight: 265 g - Road clearance: 31° - Binding: Single Sided - Cleat included: SM-SH11 - Optional cleat: SM-SH10 / SM-SH12 - Pedal Type: Road - Reflector: SM-PD65

PD-T421 FEATURE - CLICK'R binding on one side and flat pedal on the other - Customize the entry and release tension settings - Integrated reflector - Easier to catch the binding BENEFIT close - Versatile use - Longer life - Smart appearance - Weight: 418g - Easy entry and release - Better grip on flat side - Rider tune - Color: Black - Average weight: 418 g - Binding: Single Sided - Cleat included: SM-SH56 - Optional cleat: SM-SH51

- Easy step in, easy step out - Lighter spring tension optimized for beginner riders - Larger entry target for easier engagement - Cascaded features from top-tier systems - Extra-wide platform transfers pedaling power efficiently - Durable stainless steel body plate reduces flex and pedal body wear - Sealed mechanism - Single Sided Binding - Cartridge axle - Cleat retention adjuster - Average weight: 320g - Road clearance: 30 - Cleat included: SM-SH11 - Optional cleat: SM-SH10, SM-SH12 - Pedal Type: Road

Versatile Road Cleat For All Types of Riders For anyone unsure about which cleats to choose, the SM-SH11 are a great starting point. With their large float range and centered pivot point, Shimano’s Yellow SPD-SL cleats allow the toes to point in a wide range of angles and provide more room for error during set-up while still delivering an efficient connection between rider and bike. So if you're new to cycling, experience knee pain, lack flexibility, or simply don’t know where to begin, these cleats are your best bet. FEATURES: - SM-SH11 Yellow SPD-SL cleats come stock with most Shimano SPD-SL pedals and are a great choice for the majority of cyclists. They feature a six-degree float range (three degrees in each direction), which allows for free movement and low joint stress while still creating a solid connection between rider and bike. - Customizable: Seamlessly compatible with Shimano SPD-SL pedals, which allow you to adjust the spring force required to clip in and out of your pedals - Ease of Disengagement: Feature a 13-degree clip-out angle, allowing you to quickly get out of your pedals when the time calls - Off-Bike Friendly: Cleat size and shape provide stable walking platform and are less prone to clogging with dirt when off bike - Built to Last: Composite construction combines injection molded main body with grip-enhancing TPU tips that are durable and maintain long lasting pedal engagement

Shimano's SPD cleats are perfect for all your SPD-compatible pedals. If your entry and exit isn't what it used to be, a cleat replacement is just what the bike doctor ordered.

Shimano Ultegra R8000 pedals. - Pro-level performance and lightweight for the enthusiast - The legacy of Shimano design, quality and performance - Carbon-composite body - Extra-wide platform for a more efficient transfer of power - Adjustable entry and release tension settings - 4mm longer axle available - Low stack height - 0.7mm lower than PD-6800 - Model Number: PD-R8000 - Series: Ultegra - Pedal System: SPD-SL - Average Weight: 248 grams

The OneUp Aluminum Pedals features a huge (115x105mm) super grippy platform with 10 rear-loading hexagonal steel pins per side to keep your feet planted on even the roughest of trails. With a weight of only 365g, the OneUp Aluminum Pedals won't slow you down on the climbs. Designed from stealth rubber down and shaped with a subtle convex profile to provide you with more grip thanks to the pedals sitting in the natural arch of your foot. The ultra-thin design (only 8mm at the leading edge) gives you maximum clearance to reduce pedal strikes and deflect off trail obstacle. Clip Less, Ride More. When it s finally time to service your bearings, the unique cassette tool lock ring system makes re-greasing the bearings exceptionally fast and easy. FEATURES - 10 rear loading custom hexagonal removable pins per side for maximum grip - Ultra thin leading edge chamfered design to deflect off any obstacle - Fully sealed and serviceable design with built in bearing extractor - Wide platform design for increased stability - Contoured shape provides ultimate connected feel SPECS - Weight: 365g - Platform Size: 115x105mm - # of Pins: 10 per side - Axle Material: Chromoly steel - Height: 8.3-12mm - Pin to Axle distance: 112mm - Color: Black, Green, Grey, Blue, Orange, Red, Purple, OilSlick - Body Material: 6061-T6 Aluminum COMPATIBILITY - Currently, due to the deep counterbore of the crank arms, these pedals are not compatible with SRAM Carbon cranks. - These pedals are not compatible with crank boots without modification to the crank boots. We recommend removing crankboots before installation.

Light enough for cross country and durable enough for downhill. OneUp Clip Pedals are an ultra thin, super light pedal with a DH-size platform and a secure feel that you can fine tune. They’re SPD compatible and available in 8 colours. These are your new favourite pedals.

The OneUp Composite Pedals features a huge (115x105mm) super grippy platform with 10 rear-loading steel pins per side to keep your feet planted on even the roughest of trails. With a weight of only 355g, they won't slow you down on the climbs. Designed from stealth rubber down and shaped with a subtle convex profile to provide you with more grip thanks to the pedal sitting in the natural arch of your foot. The thin leading edge chamfered design gives you maximum clearance to reduce pedal strikes and deflect off trail obstacle. FEATURES - 10 rear loading Steel pins / side, with Nyloc nuts - DU plus cartridge bearing axle system - Thin leading edge chamfered design to deflect off obstacles - Wide platform design for increased stability - Contoured shape provides ultimate connected feel SPECS - Weight: 355g - Platform Size: 115x105mm - # of Pins: 10 per side - Axle Material: Black chromoly steel - Height: 18.5mm (13.3 at the leading edge) - Pin to Axle distance: 108mm - Color: Stealth Black, Red, Blue, Orange - Body Material: Nylon Composite

The OneUp Composite Pedals features a huge (115x105mm) super grippy platform with 10 rear-loading steel pins per side to keep your feet planted on even the roughest of trails. With a weight of only 355g, they won't slow you down on the climbs. Designed from stealth rubber down and shaped with a subtle convex profile to provide you with more grip thanks to the pedal sitting in the natural arch of your foot. The thin leading edge chamfered design gives you maximum clearance to reduce pedal strikes and deflect off trail obstacle. FEATURES - 10 rear loading Steel pins / side, with Nyloc nuts - DU plus cartridge bearing axle system - Thin leading edge chamfered design to deflect off obstacles - Wide platform design for increased stability - Contoured shape provides ultimate connected feel SPECS - Weight: 355g - Platform Size: 115x105mm - # of Pins: 10 per side - Axle Material: Black chromoly steel - Height: 18.5mm (13.3 at the leading edge) - Pin to Axle distance: 108mm - Color: Stealth Black, Red, Blue, Orange - Body Material: Nylon Composite

PIN KIT FOR OUR COMPOSITE PEDALS KIT CONTAINS: - 40 THREADED M3x10mm SOCKET HEAD PINS - 40 NYLOCK NUTS

Get ultimate grip and bike control with our innovative Wave profile. "Most flat pedal profiles are either convex or concave. Wave is a patented hybrid convex/concave shape that promotes an aggressive heels-dropped riding position and gives you a more natural pedal stroke when seated. With Wave, your foot is being held by the shape of the pedal - not just the pins. It’s time to ride the Wave.seated. With Wave, your foot is being held by the shape of the pedal - not just the pins."

The DELTA standard requires a rotational movement of the foot toward the outside or inside for disengagement. This function improves cyclist's safety; no body or bearing prevents disengagement toward the inside. Compatible with non-KEO LOOK pedals, their contact area is wide for optimal comfort. They also feature a memory positioner to aid when changing cleats. - Use: Road & Indoor Bike - Material: Polyacetal + PTFE - Lateral adjustment: 4mm - Longitudinal adjustment: 12mm - Weight (pair + fasteners): 75g

The KEO 2 MAX pedal is an excellent example of LOOK's design experience. With its wide contact area and composite body, it offers state-of-the-art technology for full power transfer, in an affordable package. - Technology: Spring - Cleats: Keo Grip - Retention: 8 to 12 - Body: Composite - Spindle: Chromoly+ - Platform material: Stainless Steel - Platform area: 500mm² - Platform width: 50mm - Q Factor: 53mm - Stack height + cleats: 17.3mm (11 + 6.3mm) - Weight (pedal): 130g - Weight (pair + cleats): 328g

Discover the world of clipless pedals with the KEO CLASSIC 3. The easily adjustable tension makes clipping in and out smooth and simple, with the ability to increase tension to fully appreciate the pedal and all its advantages. - Technology: Spring - Cleats: Keo Grip - Retention: 8 to 12 - Body: Composite - Spindle: Chromoly - Platform Material: Composite - Platform area: 400mm² - Platform width: 50mm - Q Factor: 53mm - Stack height + cleats: 17.8mm (11.5 + 6.3mm) - Weight (pedal): 140g - Weight (pair + cleats): 350g

The MADE by LOOK KEO standard is recognized in the cycling world for its minimal weight and compact design of the cleat and pedal combo. Of course, compatible with all pedals on the market, their memory positioner is a major advantage when changing your cleats. Their principle and use are the same as the DELTA cleat standard; engagement and disengagement remain efficient and reassuring. - Use: Road - Material: Polyamide + PTFE - Lateral adjustment: 4mm - Longitudinal adjustment: 12mm - Weight (pair + fasteners): 68g

The KEO GRIP cleats closely resemble the KEO CLEAT model, yet they boast the added feature of a TPU layer on the shoe side which prevents the risk of cleats sliding on carbon soles. Their anti-slip surface on the pedal side offers extra safety and stability when walking. - Use: Road - Material: Polyamide + TPU - Lateral adjustment: 4mm - Longitudinal adjustment: 9mm - Weight (pair + fasteners): 68g

Comfortable flat pedal with a plastic body and steel pins. Size: 100 X 95 X 18 mm Body Material: reinforced nylon composite Spindle: CNC machined cr-moly Pedal Bearings: 2 X sealed bearings / DU bushings Pins: replaceable grip pins

Lightweight minimalist gravel/XC clipless pedals. Features: Nino Schurter approved Pedal Weight (pair): 305 g Cleat Weight (pair): 64 g Size: 56 x 41 x 17.5 mm Body Material: aluminum extruded / CNC machined Spindle: CNC machined cr-moly Pedal Bearings: sealed bearings / IGUS bushings Cleat System: X1E / X1 / X1F / X3 (HT exclusive system) Caution: Q-factor 54.5mm / 51.5mm / stack height 15.6mm /

HT S-T1 Rebuild Kit.

HT S-X2 Pedal Rebuild Kit.

Lightweight clipless enduro pedal. Pedal Weight (pair): 376 g Cleat Weight (pair): 64 g Size: 68 x 84 x 17 mm Body Material: aluminum extruded / CNC machined Spindle: CNC machined cr-moly Pedal Bearings: sealed bearings / IGUS bushings Cleat System: X1E / X1 / X1F / X3 (HT exclusive system) Pins: 4 grip pins each side Caution: Q-factor 56mm / stack height 15.6mm

T2 pedals are designed for trail and enduro use, with a low-profile base platform to support increased stability on aggressive terrain. The body is made from extruded CNC-optimized aluminum for strength to weight ratio, with CNC machined chromoly spindles. - Utilizing HTs unique proprietary clipless cleat system with adjustable dual tension settings for a secure foot holding under any condition - Mud-resistant and easy to engage and disengage - CNC machined chromoly spindles - Sealed bearings and IGUS bushings - 4 grip pins on each side - Dimensions: 68 x 84 x 17 mm

Features: Standard Cleat Weight (pair): 64 g Cleat System: HT exclusive system / 4° lateral floating

Features: More floating Cleat Weight (pair): 64 g Body Material: Steel Cleat System: HT exclusive system / 8° lateral floating

Lightweight clipless pedals designed for DH racing. Pedal Weight (pair): 460 g Cleat Weight (pair): 64 g Size: 85 X 94 X 14 mm Body Material: aluminum extruded / CNC machined Spindle: CNC machined cr-moly Pedal Bearings: sealed bearings / IGUS bushings Cleat System: X1E / X1 / X1F / X2 / X3 (HT exclusive system) Pins: replaceable grip pins Caution: Q-factor 54.5mm / 57mm / stack height 14.25mm

Clipless Enduro/DH pedal with a large and supportive platform. Pedal Weight (pair): 476 g (w/front plates) Cleat Weight (pair): 64 g Size: 85 x 90 x 14 mm Body Material: aluminum extruded / CNC machined Spindle: CNC machined cr-moly Pedal Bearings: sealed bearings / 2 x IGUS bushings Cleat System: X1E / X1 / X1F / X2 / X3 (HT exclusive system) Pins: 5 grip pins each side Caution: Q-factor 55mm / 56.5mm / stack height 14.25mm

Crank Brothers' Premium MTB Cleats are perfect for your Crank Brothers Eggbeater, Candy, Acid, Smarty, Mallet, and Quattro pedals. They're made from solid brass for crisp entry and exit, and top-notch durability. - SPD compatibility - Weight (pair): 30g - Float: 6 degrees - Release angle: 15 or 20 degrees

Chromag worked with Brandon Semenuk to design a pedal that features a lightweight, compact platform body that extends inboard bringing the riders feet closer to the cranks for superior control. The Contact pedal has a very low-profile, concave CNC’d surface that is only 13mm at pedal center and weighs in at only 190g per pedal.

If the Scarab is Goldilock's happy-medium, the Dagga is anything but. We built the Dagga to see what happens when you hit the limit of ultimate grip. We make no bones about it, the Dagga isn't for everyone. It's our biggest, burliest, grippiest MTB flat pedal, built for downhill, freeride, and aggressive trail riding. Designed with input from Chris Kovarik, it features a large platform, our extra spicy Dagga traction pins, and a shape that offers maximum traction and control. If you want to tone it down a bit, our standard pins also work with the Dagga. For riders looking for the most aggressive MTB pedals, this is it.

Replacement pedal pins for Chromag pedals. Includes 40 pins.

Light, impact resistant. New for 2018 is the Synth Pedal. An injection molded, nylon reinforced platform that is light, impact resistant and won’t break the bank. Modeled after our Scarab pedal, the Synth features a large platform with true concave and our proprietary pin system. It uses the same high-end axle and bearing assembly as on our Scarab and Contact models so you can count on long-life and smooth performance, with common serviceability components available from Chromag.

Lightweight, low-profile full aluminum flat pedal - Barrel polished aluminum body with an ED black (Electrodeposition) or anodized silver aluminum cage - Built-in cage flip tab and mounting points for toe clips - Tough and durable ISO Mountain approved - Loose ball bearing axle assembly - Reflectors included (removable) - 9/16" CNC machined Cro-Mo axle - Dimensions: 97 x 63mm

Classic/retro styled looks with distinctly modern construction and materials - Barrel polished aluminum body with Polypropylene thermoplastic cage and CNC machined Chromoly axle - Inlaid TPE non-slip rubber tread for unsurpassed grip - Premium LSL (Lightweight Self-Lubricating) oil-impregnated bushing and sealed cartridge bearing axle assembly - Built-in reflectors included - 260g per pair - 9/16" axle - Dimensions: 100 x 80mm

Lightweight one-piece Polypropylene thermoplastic pedals with in-molded grip nodes. - Proportionally smaller platform size is perfect for smaller-sized feet - Durable 7mm boron steel axle - Loose ball bearing axle assembly - Built-in reflectors included - 9/16" / 1/2" axle options - 300g per pair - Dimensions: 93 x 87mm

Lightweight and strong one-piece aluminum flat pedal in a premium barrel polished aluminum finish. - Tough 7mm boron steel axle - Loose ball bearing axle assembly - Reflectors included (removable) - 9/16" axle - Dimensions: 101 x 79mm - Silver - 368g per pair

Lightweight and strong 1-piece Polypropylene thermoplastic body with a durable ED black (Electrodeposition) aluminum cage - Tough boron steel axle - Built-in cage flip tab and mounting points for toe clips - Loose ball bearing axle assembly - Tough and durable ISO Mountain approved - 300g per pair - 9/16" axle - Dimensions: 102 x 62mm

Lightweight one-piece Polypropylene thermoplastic pedals with in-molded grip nodes. - Durable boron steel axle - Loose ball bearing axle assembly - Built-in reflectors included - 309g per pair - 9/16" / 1/2 axle options - Dimensions: 100 x 86mm

Wolf Tooth Ripsaw Aluminum Pedals feature a slim, lightweight design with a slight convex profile. The large, asymmetric machined aluminum platform provides strong foot support for all-mountain riding, while the thin convex profile is just 7mm thick at the leading edge. Inside the pedal are three fully sealed cartridge bearings, a stainless steel axle, a igus bushing, and a custom radial seal to protect internal components against trail debris. Slim Convex Profile Ripsaw pedals are 12.5mm thick in the center and just 7mm thick in the front and rear edges. This profile is supportive and comfortable for all riders, while performing exceptionally well for riders who prefer pedaling with a mid-foot position or for shoes that do not have much structure or support. Extra Grip Each side of the pedal has 12 stainless steel rear-loading 4.5mm pins for loads of traction. An additional six 4.5mm pins ship with the pedal. Shorter 3mm pins are available as replacement parts to customize the convexity of the pedal; by installing shorter pins on the edges, the convex profile is emphasized. Formed with Purpose The slight convex profile of the pedal body is tallest at the pedal spindle. The shape then tapers toward each edge from there. This profile aligns perfectly with the arch of your foot and provides a strong platform for power transfer. Reliable Performance Three low-friction, fully sealed cartridge bearings and one igus bushing with a custom radial seal protect internal components against trail debris for riding in all conditions. Precision Machining Each Ripsaw Aluminum Pedal body begins as a billet of raw aluminum. After 37 minutes in our CNC mills, the result is a beautifully crafted pedal body that is ready for anodizing and assembly. If you’re a nerd for machining, you’ll appreciate the intricate gradients and machine paths.

Wolf Tooth Waveform Aluminum Pedals are designed for all-mountain riding, from XC to downhill. They are engineered to lock in your foot with a shape that matches your shoe, rear-loading pins for grip, and a dual-concave profile to further cradle your feet. The pedals come in two sizes, and are proportionally scaled to provide a supportive platform shaped to match the footprint of your shoe. Large is 112mm x 106mm, small is 105mm x 99mm. Dual-Concave Profile: - Waveform pedals are 14mm thick on the perimeter and just 12.5mm thick in the center. This profile cradles your foot, front to back and side to side. Extra Grip: - Each side of the pedal has 11 stainless steel rear-loading pins for loads of traction. An additional six pins ship with each set of pedals and they are available as replacement parts. Shaped with Purpose: - The shape of Waveform Aluminum Pedals matches the footprint of your shoe Reliable Performance: - Three low-friction, fully sealed cartridge bearings and one igus bushing with a custom radial seal protect internal components against trail debris for riding in all conditions. Tapered Edges: - Large, tapered leading edge to deflect pedal strikes on rocky, rooty terrain Two sizes: - Large: 112mm x 106mm - 384g - Small: 105mm x 99mm - 373g Each size is proportionally scaled to match the silhouette of your shoe based on foot size or pedal size preference.

Wheels Manufacturing Pedal Washers help distribute the forces of a pedal spindle on your expensive crank arms and allow you to torque pedals properly over and over again without damaging crank arms.

Replacement charging clips and Y-shaped cable for the POWRLINK ZERO Power Pedal System In the box - Y-shaped charging cable - Charging clips (x2)"

BREAKTHROUGH POWER Built on the cutting-edge SPEEDPLAY pedal platform, POWRLINK ZERO delivers reliably accurate power and cadence data in a race-proven pedal system. This powerful combination creates an unrivaled power pedal that helps cyclists optimize performance to break through to the next level. A POWERFUL COMBINATION POWRLINK ZERO combines proven sports science and years of industry-leading research with the superior adjustability, increased power transfer, reduced weight, and enhanced aerodynamics of the SPEEDPLAY platform to create a pedal system that delivers a distinct performance advantage. BETTER YOUR BEST Accurate to +/- 1%, POWRLINK ZERO’s internal gyroscope removes cadence variation to measure power output more precisely. Combined with Wahoo’s sports-science based algorithms, cyclists get accurate values they can use to achieve next-level performance gains. LASTING POWER POWRLINK ZERO is made with premium materials for superior strength-to-weight ratio – making it perfect for enduring efforts. In addition, the rechargeable battery lasts up to 75-hours per charge to give you the power to go long. Really long. In the box - Left Power Pedal and Compatible Right Pedal - Washer (x2) - Cleat Assembly - Screw Packet - Charging Cable and Clips - Quick Start Guide - Important Product Information Guide Additional Tools Required for Assembly: #1 and #2 Philips Head Screwdriver and 8mm Allen Wrench"

The SPEEDPLAY Walkable Cleat Cover Kit replaces your worn bicycle cleats to provide protection, comfort and traction. The kit is compatible with your Wahoo SPEEDPLAY Standard or Easy Tension Bike Cleats, as well as legacy SPEEDPLAY ZERO Walkable Cleats. The kit does include Cleat Surrounds.