Other

Chain tensioner bolts that fit all current Kink aftermarket frames. - Thread: M6 x P0.7mm

- Converts 140 post mount to 160 or 160 post mount to 180mm - Simplified and lower profile design allows for the use of only 2 bolts instead of 4 - Compatible with all TRP and Tektro disc caliper 160, 180, and 203 rotor sizes

Flat Mount Disc Caliper Bracket Bolts

Replacement foam rings and bottom out bumper for your REVIVE MAX dropper post. The foam ring in the lower tube of your BikeYoke dropper post is a crucial component that prevents water and dirt from entering your post too easily. Keep it dry and clean at all times so your post can breathe and replace if needed. Kit includes: - 2x foam ring - 1x bottom out bumper

Replacement foam rings and bottom out bumper for your BikeYoke dropper post. The foam ring in the lower tube of your BikeYoke dropper post is a crucial component that prevents water and dirt from entering your post too easily. Keep it dry and clean at all times so your post can breathe and replace if needed. Kit includes: - 2x foam ring - 1x bottom out bumper Fits: - REVIVE (not REVIVE MAX) - DIVINE - DIVINE SL - DIVINE SL Rascal

Small parts for Wolf Tooth ReMote.

- Grade 10 chromium steel balls

Parts for the service of the seal and restore the smooth cycling of KS dropper posts.

Clutch switch lever and fixing plate for Shimano XTR RD-M9100. Product of Japan.

Ohlins adapter kit for fitting the EVO Bolt-on fenders to your OHLINS forks. Compatible with RXF 38 (2019+) and DH forks. Minimum Fork Offset: 44mm Compatible with Mudhugger EVO Shorty Bolt-On and EVO (Long) Bolt-On fenders. Kit includes: - 1x Ohlins adapter Bracket - 3x M4 bolts - 1x Hex key

The ZEB Adapter for fitting the EVO Bolt-On fenders to your Rock Shox ZEB fork. Minimum Fork Offset: 44mm Compatible with EVO Shorty Bolt-On and EVO (Long) Bolt-On fenders. Kit includes: - 1x ZEB adapter bracket - 3x M3 bolts - 3x M3 washers - 1x 3mm bolt sleeve

RockShox XLoc Parts

Customize your ride with SRAM bar end plugs.

Forged Alloy seat-clamp.

- Missing links to make chain installation, maintenance and reparation easier - Reusable up to 3 times - Compatible with 6, 7 and 8 speed IG drivetrains - Pin width: 7.1mm - Card of 2

Saddle clamp heads and lowers for KS Dropper posts.

Replacement bushings for Cane Creek shocks.

- Grade 10 chromium steel balls

Parts for the service of the seal and restore the smooth cycling of KS dropper posts.

Bottom bracket cup and spindle spacers for adjusting chainline or bearing play.

Notched binder bolts for frames with integrated seat collars. Details: CroMoly steel bolts Three lengths available: 16, 19 and 21mm 8mm diameter

- Missing links to make chain installation, maintenance and reparation easier - Card of 2

Bottom bracket cup and spindle spacers for adjusting chainline or bearing play.

Our clever Splits clamp attaches our Triggy directly to the handlebar. Special plastic compounds and production process allow flexibility within the clamp to have it installed, while grips and brakes are still on the bars. Just snap it on! A heat treated inlay made of stainless steel with a laser engraved finish, give it a unique and classy look. By the way: SRAM shifter triggers can also also be attached to the handlebars using our Splits clamp.

Replacement elastomers for Thudbuster LT suspension seatposts allow the rider to tune for weight.

Replacement elastomers for Thudbuster LT suspension seatposts allow the rider to tune for weight.

Replacement elastomers for Thudbuster LT suspension seatposts allow the rider to tune for weight.

Replacement elastomers for Thudbuster LT suspension seatposts allow the rider to tune for weight.

Replacement elastomers for Thudbuster LT suspension seatposts allow the rider to tune for weight.

- Grade 10 chromium steel balls

Profile Design’s Venturi Pads are the correct foam replacement pads for your Profile Design Century Aerobars (sold separately). They have adhesive on the bottom.

Replacement M6 Short Nut/Bolt Set for Wheels Mfg. derailleur hangers. - Custom M6 short chainring bolt style fastener - Use with 4mm hex wrench - Length of bolt: 6.4mm under head - Length of Nut: 3.5mm (under head), 5.2mm (overall)

Valve-extension-adapter. Allows easier access to your dropper valve for shock-pumps with short valve heads.

RockShox cable and hose guide.

RockShox cable and hose guide.

RockShox hydraulic hose guide.

Brake Pad Spreader Springs - Available for Guide Ultimate and Guide X0 brakes

X01 Eagle Cable Anchor Kit

Chainring Bolt Kit - 4 Arm Single with Aluminum Guard

- Chain Ring Bolt Kit 4-arm Triple

- Truvativ Crank arm bolt, M12, Capless, For Howitzer, Bag of 2

- Plastic bar end plug pair for 22.2mm extensions

Fun handlebar-mount streamers. - Quick and easy installation

Carbon fiber headset stack spacers, precision cut to ensure proper headset function. - Compatible with all threadless and threaded headsets

ZIPP Service Course Bar End Plugs, Qty 2.

Screws required for mounting Campagnolo hydraulic rear calipers to bicycle frames. Lengths unique to frame specifications.

Forged Alloy seat-clamp with QR lever.

Replacement seals for servicing Cane Creek rear shocks.

Allows the use of VALT springs with Fox coil shocks.

Installation of air volume reducers for Cane Creek shocks make the spring rate more progressive. - Spacers can be cut to fine-tune spring curve

- Missing links to make chain installation, maintenance and reparation easier - Card of 2

KMC Missing Link connectors are for use on new chains or to keep in your seat bag for an emergency repairs. - Compatible with KMC and Shimano 10-speed chains - Includes 2 pairs

Kit includes: - x2, Bolts (M5) with conical washers (T25 head) - x2, Barrel nuts Compatible with: - REVIVE / REVIVE 2.0 - REVIVE MAX - DIVINE - DIVINE SL - DIVINE SL RASCAL

Clean up your Bontrager Elite stem cockpit with Blendr Elite bases. Blendr works with this simple formula: Stem + Base + Mount. Add accessory. Key features: - Bases for use with Elite stem - Add any XXX accessory mount for an elegant integrated look

Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters. - Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series - Integral mold seals keep out the elements - Compatible with 41 and 42mm lower headset bearings - Compatible with 30mm (1-1/8") straight steerer tubes - Durable steel construction

Thudbuster 3G Elastomer

Thudbuster 3G Elastomer

IS47-IS41 Headset Converter

Replacement elastomers let you tune the suspension on your Cane Creek Thudbuster short-travel seatpost. Available in various models, ranging from extra soft to extra firm.

Service your DT Swiss star ratchet hubs and wheels with DT Swiss Ratchet and Kits. - DT Swiss 370/Onyx Service Kit: 2 pawls, spring and grease