$64.99 - $149.99
Yakima's vehicle-specific Landing Pads are required to mount Yakima Control Towers to your car. One end of the Landing Pad attaches to the Tower and the other end attaches to your vehicle's factory track system. They also have rubber bottoms to protect your vehicle's finish. Select the right model Landing Pad for your vehicle using the Yakima fit configurator.
Long, narrow and sleek, Yakima's SkyBox 18 safely totes your gear. It sports a rugged and spacious design and a smooth, aerodynamic profile. Plus, with no-assembly, rapid-fire mounting hardware and dual-sided, spring-loaded openings, it's easy to get this box on and off, and opened and closed. The universal mounting hardware fits round and square crossbars, plus many factory racks, too. - Dimensions: 92 x 36 x 16 inches - Capacity: 18 cubic feet - Yakima SKS locks included - Weight: 52 pounds
Super simple, the EasyTop is an instant roof rack. Strap it on top of almost any vehicle to carry up to 80 lbs of long, flat gear–from skis and snowboards to boats and surfboards. It installs in minutes–just loop it through the door frames and buckle it up. The thick padding protects your vehicle and your gear, and the double-latching buckle adds extra security. Traveling out of town? Bring it along and strap it to your rental vehicle. - Straps on top of almost any vehicle to create an instant roof rack - Carries us to 80 lbs of gear - Great for boats, boards, skis, ladders, and other long, flat loads - Thick structural padding protects your roof and your gear - Secures easily through door frames with integrated straps - Double-latching buckle adds security - Includes two Heavy Duty Straps and tie-down rope
Blast off to outdoor fun with Yakima's convenient RocketBox Pro 11. This long, thin box offers 11 cubic feet of waterproof cargo space, easily carries skis or snowboards and makes excellent use of precious crossbar space, leaving you plenty of room for other mounts. It's made from high-impact, UV-resistant ABS plastic, and features a flat bottom as well as a lid support for easy access. Lockable via the included Yakima SKS (Same Key System) locks, this versatile box sports push-button opening from either side of your vehicle for the ultimate in accessibility. Plus, its quick-release hardware fits round bars, square bars and most factory racks.
The SUPDawg makes launching your board easier than ever! Comes fully assembled out of the box, features integrated rollers for easy loading and includes SKS locks for aprés-paddle security. Holds up to two 36" wide boards. -Fully assembled out of the box -Tool-free installation Integrated rollers for easy loading of oversized SUP boards -Fits Yakima round, factory, aero and square bars -Slider adjusts to boards up to 36" wide -Soft padding cradles and protects boards -Integrated strap management stows straps during travel -Premium, sleek glossy black finish compliments modern vehicle types -Includes everything needed to carry up to 2 SUP boards -SKS Locks included; locks racks and board -Minimum crossbar spread of 24\u001D inches or more
Kuat Racks Phat Bike Kit. This item includes the strap extender for the rear tire strap and a secondary Velcro strap for the front tire.
Thru-axle adapter works with WheelHouse to hold wheels with 12mm and 15mm thru-axle. - Easy cam lever for quick installation - Durable stainless steel skewer - Up to 110mm front hubs Product Specs: - Weight: 0.44 lbs. - Dimensions: L 9.00 in x W 0.75 in x H 2.00 in - Limited Lifetime Warranty
$59.99 - $64.99
Yakima's vehicle-specific Q Clips are required to mount Yakima Q-Towers to your car. One end of the Q Clip attaches to the Tower and the other end attaches to your vehicle's door frame when you fasten your roof rack. Plus, they're coated to protect your vehicle's finish. Select the right model Q Clip for your vehicle using Yakima's rack configurator.
This low-profile custom-install solution delivers up to a 220-lb. load capacity. It's a great choice for most any naked roof vehicle with a roof ditch. Combine with SkyLine Towers and any Yakima crossbars to create a roof rack system ready for a wide selection of gear mounts, including a roof top tent. Product Details: - Permanent installation into the roof ditch for up to a 220-lb. load rating. - Designed for use with our SkyLine towers paired with any Yakima crossbar. - Yakima's patented Landing Pad design for quick and easy tower installation and removal. - Includes snap-on covers for when the rack is removed. - Choice of two pad shapes lets you create the perfect fit. - Stainless steel rivets for superior strength. - Includes four Landing Pads and necessary hardware (see instructions for required list of tools) - Vehicle must have compatible roof ditch for proper instillation (see instructions for fit parameters) - Some assembly required,10 minute install Product Specs: - Weight: 2.57 lbs - Dimensions: L 7.00in x W 2.00in x H 1.50in
Ready to go when the fish are biting, the TopWater is a purpose-built, enclosed fishing rod box—keeping you prepared to hit the water with up to 8 fishing rods, up to 8 feet long, fully rigged, organized, and out of the vehicle. From spin to bait casting to fly rods, the protective foam pads and retention straps keep rods and reels safely suspended in place without getting banged around or entangled. The space below your rods makes room for low-profile tackle boxes or other wet gear. Made in the USA, this strong and rugged fishing rod box locks your gear with an included Yakima SKS (Single Key System) lock. For added ease, the universal attachment secures the TopWater to nearly any roof rack or Yakima's EasyRider and RACKandROLL trailers. Product Details: - Carry up to 8 fully rigged-up fishing rods of any style, up to 8 ft. long. - Side opening for easy access to rigged-up fishing rods. - Keeps wet rods out of the vehicle, organized, and set up for the day. - Space below the rods is perfect for low-profile tackle boxes and other gear. - Protective foam pads-designed with individual rod slots. - Rubber retention straps secure rods in place. - Small drain holes help prevent water from pooling in bottom of the box. - Built-in rod shields protect rod tips from damage. - Removable rod holders for 4 season transport of skis and other long gear. - Made in the USA with a sleek, aerodynamic Carbonite-textured lid. - Universal mounting hardware fits all Yakima crossbars and most other roof racks. - Add the SmarT-Slot Kit 5 to attach to a T-slot crossbar for an even sleeker profile (sold separately). - The included Yakima SKS (Single Key System) lock secures rods inside TopWater and locks TopWater to roof rack. - Made in the USA. Product Specs: - Weight: 31.10 lbs - Dimensions: L 102.00in x W 18.00in x H 9.00in
Yakima SKS (Same Key System) Lock Cores secure all lockable Yakima rack systems, cargo boxes, and accessories. It's your gear, keep it that way. - Fits all lockable accessories - Includes 8 SKS Cores and matching keys - 2 keys included plus a control key
Coupler for 2" balls for RACKandROLL trailer. Product Specs: - Weight: 4.12 lbs. - Dimensions: L 11.00 in x W 3.90 in x H 5.00 in - Limited One Year Warranty
$54.99 - $69.99
If it floats and fits on crossbars, these Crossbar Pads will help protect it. - Goes great with kayak stackers, heavy-duty straps, and strapthang
The Yakima FlushBar has a signature look that seamlessly integrates with the shape of your modern vehicle. This crossbar with integrated towers has no bar overhang, so your vehicle will look like it came from the factory with FlushBars already installed. The FlushBar shape maximizes strength, while minimizing drag and reducing noise levels to nearly zero. It accepts almost all Yakima mounts and cargo boxes for adaptable, multi-sport versatility. A complete system consists of two FlushBars and a Yakima Fitting Kit. Please consult www.yakima.com to determine which Yakima Fitting Kit and which FlushBar sizes are required for your specific vehicle. Product Details: - Tower is integrated with the crossbar for a sleek, seamless appearance - WindRidge on the leading edge of the crossbar reduces noise and decreases drag - JetTruss internal support engineering adds serious strength for minimal weight - Patented SmartFill technology allows for easy install of T-slot style mounts, such as the Yakima HighSpeed with SmarT-Slot Kit 1 - Compatible with almost all Yakima mounts and cargo boxes. Consult Yakima's Fit My Vehicle Guide for a detailed list. - Anchors to your rooftop with vehicle specific Yakima fitting kits (sold separately). Consult Yakima's Fit My Vehicle Guide to determine which Yakima Fitting Kit is required for your vehicle. - Easily locks to your vehicle with Yakima's SKS system (sold separately)
Our burliest crossbar ever, the HD Bar is the one for heavy loads, rugged terrain and maximum utility. It delivers the muscle our new truck racks demand, and works with our StreamLine towers to get the heavy-duty job done right. The engineered aluminum construction provides superior support without weighing things down, integrated tie-down points to simplify load security, and T-slot attachment technology for adding gear mounts the fast, easy way. The Yakima Way. Product Details: - Strong, lightweight aluminum construction handles heavy loads great for rooftop tents - Integrated tie-down points on endcaps make it easy to secure gear - T-slots top and bottom to easily add Yakima and compatible gear mounts - Includes rubber infill for top T-slot for load protection and wind noise reduction - Built to last and look good doing it with a durable black powder-coat finish - Compatible with all StreamLine towers with our new HD Bar SL Adapter (sold separately #8003541) - Available in variety of lengths 55"/60"/68"/78" to create custom set-ups Dimensions: - Small = 9.61 lbs, L 55.00in x W 3.00in x H 1.50in - Medium = 10.68 lbs, Dimensions: L 60.00in x W 3.00in x H 1.50in - Large= 11.65 lbs, Dimensions: L 68.00in x W 3.00in x H 1.50in - X-Large= 12.00 lbs, Dimensions: L 78.00in x W 3.00in x H 1.50in
Chainstraps for a multitude of rear of car bike racks.
Custom Landing Pads to install directly to the factory mounting points on flush rails of the 2015 - 2019 Subaru Outback. Combine with SkyLine Towers and StreamLine crossbars for a full-featured Yakima base rack, significantly increasing cargo capacity over the factory crossbars. Product Details - Seamlessly combines with SkyLine Towers, the easiest-to-use rack system on the market - Complete set of 4 Landing Pads with no additional tools required - 33" crossbar spread allows most Yakima gear mounts - Snap-on covers to keep the elements out while the rack is removed - Weight: 1.35 lbs - Dimensions: L 5.50 in x W 1.50 in x H 2.75 in
The FatCat EVO is our sleekest, quietest, and sweetest ski & snowboard mount. It is wide enough to carry six pairs of powder skis—up to 136mm at the tip—or four snowboards. FatCat EVO mounts tool-free on virtually any roof rack. The OverHang clamp attachment point makes it easier to reach your skis or boards. SKS locks are built in for added security, and the mirror black finish looks awesome on your roof. For T-Slot crossbars, add the SmarT-Slot Kit 2 for a super-sleek setup (sold separately). - Easily carries six pair of skis—up to 136 mm wide at the tip—or four snowboards - Aerodynamic design delivers a quiet ride and streamlined good looks - Universal mounting system works with round, square, factory, and most aerodynamic roof racks - Integrated SkiLift provides clearance for tall bindings - DoubleJoint hinge expands for easy use with thick skis and boards - For easier access to skis and snowboards, the OverHang clamp-mounting position shifts the mount further out on your vehicle's roof rack - Large button makes it easy to open with gloves or mittens on - Sleek mirror-black finish looks great on your roof - Integrated SKS (Same Key System) locks included - Compatible with T-slot crossbars—just add our SmarT-Slot Kit 2 (sold separately) Product Specs: - Weight: 12.75 lbs. - Dimensions: L 40.50 in x W 3.75 in x H 5.25 in - Minimum Crossbar Spread 12.00in - Maximum Crossbar Spread 36.00in - Limited Lifetime Warranty
Our dependable new Recovery Track Mount is a smart, quick, secure way to keep recovery tracks on hand and within reach. Now you can deploy them whenever you need traction. Easy to install and use, this mount is designed to work with our Truck Collection’s HD Bars and SideBar, along with most other T-slot crossbars. - Holds up to four MAXTRAX MKII, TRED Pro or TRED 800/1100 recovery tracks - Durable molded base is built for rugged travel in a range of conditions - Tracks stay secure with Yakima Heavy-Duty Straps for a confident hold on rugged terrain - Attaches to the SideBar accessory on the OverHaul HD or OutPost HD and to the HD Bar or other T-slot style crossbars - Includes hardware for both HD Bar and standard T-slot crossbars - Requires 20–35" (49–89 cm) crossbar spread range (unless paired with SideBar) - 35-lb. load capacity - Weight: 3.20 lbs - Dimensions: L 10.00in x W 3.00in x H 11.50in - Some assembly required, 5 minute install
Form, meet function. A carrying option worthy of your vehicle’s roof, the CBX combines rugged, trail-ready, aesthetics and an all-new textured surface to raise the cargo box game. The details make the design, with an integrated, easy-grab lid handle that locks gear inside, a removable torque tool that stows away to deliver all available space for your gear, and premium black chrome badging that stands out from the crowd. Product Details - Rugged angular finish and stealth-like texture stands out from the crowd - Intuitive and easy-to-grab lid handle locks gear inside the box and the box to the vehicle - Removable torque-limiting knob ensures a safe and secure installation - Market-leading internal usable space with an unobstructed flattened floor provides more space for your gear - Optimized hatch clearance for better vehicle fit - Internal lid stiffeners for durability and easy open and close - Dual-sided opening for easy access on either side of your vehicle - Hauls gear for up to 5 campers; fits snowboards and skis up to 215cm - Integrated interior tie-down points - SKS Locks included for added security - Black chrome badging - 18 cubic feet of cargo space - Made in the USA Product Specs - Weight: 65.00 lbs. - Dimensions: L 91.00 in x W 38.00 in x H 16.00 in - Minimum Crossbar Spread 24.00in - Maximum Crossbar Spread 40.00in - Limited Lifetime Warranty
The versatile, no-drill Outdoorsman lets you create a top-of-vehicle truck rack system for your full-size pickup truck—without the need for a camper shell—while leaving you full access to the truck bed. - Clamps onto truck bed rails without any drilling - The perfect rack solution for everyday hauling of ladders and lumber - Heavy-duty construction handles up to 300 lbs - Sold in pairs; combine single pair with racks on truck roof or combine two pairs for complete system Product Specs: - Weight: 25.00 lbs. - Dimensions: L 16.00 in x W 2.00 in x H 29.00 in - Limited Lifetime Warranty
$74.95 - $89.95
Thule's Thru-Axle Adapter allows you to carry bikes with through-axle front forks on Thule and most other fork-mounted bike carriers.
Premium trunk-mount bike carrier provides robust attachment and fits a wide range of vehicles, including those with a spoiler. - Maximum fastening security to your vehicle with steel cables - Quick and easy mounting to the car thanks to simple user interface and intuitive torque-limiting tightening system - Firm carrier hold and vehicle protection with twin hook attachment and rubber protection pads - Bike protection and security with soft cradles that absorb road shock and vibrations - Vehicle and bike protection with integrated anti-sway system that prevents bike-to-bike and bike-to-vehicle contact - Accommodates a variety of bike frames/geometries including smaller kids bikes thanks to adjustable bike arms - Locks the bike to the bike rack and the bike rack to the roof racks (locks included) - Bike arms fold down when not in use, and rack folds flat for easy transport and convenient storage - Easy to assemble with included tools - Possible to open vehicle trunk without any mounted bikes Technical specifications - Max number of bikes: 2 - Load capacity: 66 lb - Max bike weight: 33 lb - Dimensions: 24.5 x 30.7 x 31 in - Folded dimensions: 9.4 x 30.7 x 20.9 in - Weight: 18.3 lb - Carbon frame compatible - One Key System compatible - Lockable bike-to-rack - Lockable rack-to-vehicle
Thule's Round Trip Case Rack Mounting Kit lets you easily mount your Round Trip hardshell bicycle case to your Thule roof rack (case and rack sold separately). The kit includes two heavy-duty load straps, protective rubber buckle bumpers, and weather stripping to seal your rack case against the elements.
Fully lockable multipurpose holder for carrying paddles, oars, and masts. - Fully lockable holder for paddles, masts, oars, and other similar sized items. - Fits items up to 4 inch/10 cm diameter - Capacity to transport and lock multiple paddles - One Key System - can be locked, lock (1) sold separately - Equipment protection provided by rubber cushion - Fits Thule square, xsporter, rapid aero, and professional series bars, round bars, and most factory installed cross bars - Integrated cable secures items and deters theft of expensive paddles
No longer will you have to decide between the turkey fryer, pop up tent, folding love seat, chef kitchen, dog tent, and a 128 capacity cooler. The Xtender adds 21 inches to the Vagabond X and comes with burly load bars for all your other toys. Leave nothing behind. - Comes with 2 load bars - Adds 21" to your Vagabond X - 160lb total load capacity - Makes Vagabond X 41" x 73" x 7" - Load bars measure 44"
Yakima's caged beast offers monstrous carrying capacity. The MegaWarrior is a perfect fit for mid- to full-size sport-utility vehicles and it's made of heavy-duty steel. You can easily attach bike mounts directly with its movable accessory bar and a custom fairing is included to cut wind noise and protect your cargo. The MegaWarrior's universal mounting hardware fits round and square crossbars, plus many factory racks, too.
Amp up the utility of your LockNLoad platform rack with this set of versatile, heavy-duty aluminum perimeter rails to help secure and tie down your load. The rails also feature a convenient side channel for mounting Yakima T-slot attachments. Each kit includes a pair of front/rear rails, and a pair of side rails that easily install in the channels along the perimeter and inner slats on the platform. Designed and thoroughly tested in the rugged Australian Outback to meet Yakima's new Off-Road Rated standards. Product Details: - Loads can be secured, braced against, and/or tied down to perimeter rails. - Integrated T-slot in the perimeter rails makes it easy to attach your Yakima T-slot accessories. - Sold in sets of 4 rails (2X right/left side rails and 2X front/rear rails). - Heavy-duty hardware features a durable black-zinc coating. - Designed and thoroughly tested in the rugged Australian Outback to meet Yakima's new Off-Road Rated standards. - Fits most other T-slot equipped platforms (please verify your platform's size and compatibility before purchase). - Easily installs in minutes. - Weight: 15.40 lbs - Dimensions: L 37.00in x W 1.50in x H 3.50in
Fat bike skewer and thru axle tube adapters for the Küat Trio roof rack.
Classic steel square bars with black polymer coating. 2-pack. - Standard steel load bar available in a variety of lengths - Plastic coating provides additional grip for rooftop cargo - Check the Thule Buyer's Guide to find out which roof rack fits your car - 135cm / 53 in