Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Tools
We went through extra steps to make this tool half precision measuring instrument and half pry bar.
- Tolerances as tight as a quarter of a thousandth of an inch (.0063mm) in some critical dimensions of this tool.
- Ability to lock in the feeler so you don't have to second-guess your measurement after bumping it on the tire.
- Top half of tool will rotate out of the way of fender stays and frame tubes.
- Feeler gauge stick stores inside the top half of the tool, very handy for the traveling mechanic.
- T-bolt extends past the tool for access to those problematic hangers found on some modern full suspension bikes.
- Compact at just under 11" ( 28cm)
- Re-buildable - While ideally your HAG should be sent back for a rebuild, it is possible to do them in the field by replacing the brass bushing in the T-Bolt.
- Compatible with the three most common wheel sizes (26, 27.5/650B, and 700/29)
With thru axles becoming more and more common, the original Crombie tool was due for a makeover. We took the piloting pin and plus-sized it to work with the 12mm thru axle fitment that is actually standardized. We make this version as a dual-sided tool with two S Group ends, one for thru axle wheels and the other for regular hubs. The regular side has a hole deep enough to hide a skewer nut; it's really the best of both worlds.
- Comes with a solid handle
- Note: this version of the Crombie tool is not compatible with any Campagnolo wheels.
- Dimensions: 9.625in x 1.0in
- One-way Torque Wrench
- 5-25 N'm. for 1/4" and 3/8 drive sockets
- 21~105N·m, for 3/8" & 1/2" drive sockets
- Tap Pro set w/handle & pouch for
- 3m X 0.5 dropout alignment screws
- 5m x 0.8 water bottle, fender eyelets
- 6m x 1.0 anti-brake large fender bracket
- 10m x 1, derailleur hanger
- 1/2 x 20tpi left & right pedal taps
- 9/16 x 20 tpi left and right pedal taps
- Compatible with both Presta and Schrader valves
- Easily removes valve cores
Precision brake bleeding tools and adaptor kits for Magura brake systems.
- Bleed adaptors fit MT series
- Attaches to caliper only
Precision brake bleeding tools and adaptor kits for Magura brake systems.
Precision brake bleeding tools and adaptor kits for Magura brake systems.
- 30mL graduations
$2.00
Replacement threaded cap for Abbey Hanger Alligment Gauge Tool.
$4.49
- Replacement head sections for hammer 100
- 33mm diameter
- Powerful hammering with surface protection
- -01 : Semi-hard Urethane
- -02: Hard Cellidor
- -03: Very hard Nylon
$4.49
- Practical rack for wall mounting.
- Provides tidy storage for the screwdrivers.
- Compatible with all Srewdrivers.
$4.99
This is a single replacement pin for Park Tool HCW-4 and SPA-6 pin spanner wrenches.
$4.99 - $9.99
High-quality Kraftform Plus screwdriver. Multi-component Kraftform handle for fast and low-fatigue working. Kraftform Plus: hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. Hex-Plus offers a larger contact surface within the screw head. This reduces the notching effects to a minimum and almost completely eliminates the risk of destroying the screw recess. "Take-it-easy" Tool Finder: color coding according to profile and size. The hexagonal anti-roll feature prevents any bothersome rolling away at the workplace.
- Hexagonal screwdriver hex-plus
- Multi-component Kraftform handle for fast and ergonomic screwdriving
- Take-it-easy tool finder: color coding according to profile and size
- Hex-plus allows socket head screws to live longer
- Hexagonal anti-roll feature against rolling away
$5.49 - $10.99
High-quality Wera L-keys with color-coded, convenient plastic sleeve. The tool is quickly accessible and the ergonomic and pleasant handle is easy on the hands even at low temperatures. The Hex-Plus profile offers a larger contact surface within the screw head. This reduces the notching effects to a minimum and almost completely eliminates the risk of destroying the screw recess. The ball-end on the long arm allows for reliable working even in difficult installation situations. The BlackLaser surface treatment provides outstanding surface protection, even against corrosion, and a long service life. The tools are quickly to hand thanks to the laser-engraved and thereby wear-resistant size markings on the L-keys.
- L-keys for hexagonal socket screws
- Hex-Plus allows socket head screws to live longer
- Color coded, easy-to-grip plastic sleeve, even at low temperatures
- Hexagonal ballpoint on the long arm
- Wear-resistant size marking
$5.68
High-quality bits for recessed Torx Plus screws. Torx Plus profile: in comparison to normal Torx profiles, the enlargement of the 6 torque-transferring flanks between the tool and the screw is effected by means of an ellipse-shaped profile design and not a circular one. This means that the power applied when screwdriving is spread over a larger area. Higher torque is transferred and the service life of the screw and tool is also enhanced.
- For Torx Plus screws
- Particularly hard for semi-hard materials
- 1/4" hexagon drive
- High torque transfer
- Size: 40 IP x 25mm
$5.99
Refill pack for the Park Tool TPT-1 Tubeless Plug Tire Tool and other similar tools. These vulcanized rubber plugs are used to temporarily repair punctures in tubeless bicycle tire systems. Set of 5.
NOTE: Intended for tubeless bicycle tires using sealant only. Not compatible with inner tube systems.
$6.99
- Installs and seats against the inner race of the cartridge bearing for removal (punch from other side of tool against tool flats)
- Effectively fits on cartridge bearings with 10-25mm inner race ID's
$6.99
- Microcell is ergonomically contoured for maximum comfort and surface area
$6.99 - $9.99
Park Tool's Replacement Chain Tool Pin (2-Pack) fits Park Tool's CT-1, CT-2, CT-3, CT-3.2, CT-5, and CT-7 Chain Tools.
• Made from hardened alloy tool steel
• Uses 7mm or 9/32" 12 pt box end/socket
• Sold singly or in pairs
$6.99
• Updated with a new material and new design
• Features a wide flat tip for easy entry and fast tire removal, ergonomic shape and a handy spoke hook when multiple levers are needed
• Perfect for tight beads and tubeless tires
• Sold in sets of two.
$6.99
• Updated to be stronger, smoother, and more versatile
• Features a new material and redesigned tip for easier entry into just about any tire, including tubeless
• The unique design lifts the tire away from the rim and features a spoke hook to use when multiple levers are needed
• This set includes 3 tire levers
$6.99
- High quality Kraftform Plus screwdrivers.
- Multi-component Kraftform Plus handle
- Hard gripping zones for high working speeds whereas soft zones ensure high torque transfer.
- Lasertips microscopically roughened for optimal bite to the screw.
- ''Take it easy'' tool finder with color coding according to profiles and size stamp
- The hexagonal anti-roll feature
$6.99 - $7.99
- Compatible for Manual and power tool socket insert (ISO 2725-Part 3)
- "Take it easy" Tool Finder with color coding according to size
- Featuring a good grip to allow easy pick-up even with oily hands.
- Ball stop groove, for hex head bolts and nuts; chrome vanadium steel, matt chrome-plated.
$7.49
To adjust preload on Hollowtech II cranksets
$7.99
Calling all eco-warriors, our Collapsible Silicone Funnel helps you refill without any spill when you’re keeping your lube bottles topped up. Tell spillages to "do one!”, meaning you’ll never lose a drop of the good stuff again! Specifically designed to top up our 32ml, 50ml and 120ml bottles with our larger refill options.
- Designed to fit into the bottle neck of our lube bottles for easy refilling
- Collapsible fold up design makes it portable and easy to store
- Flexible construction
- Easy to clean and dishwasher safe
- Made from durable, food-grade silicone that’s non-toxic
- Silicone is highly durable and more ocean friendly than plastic
- Collapsible design means lower CO2 footprint in shipping compared to regular plastic funnel
Page 1 of 30
Next page