Lubes/Cleaners

Maxima Plush Dynamic is an advanced specialty fluid formulated for high-performance suspension systems. Formulated and tested with OEM engineers and designed for use in lower fork legs and multiple other non-damper components. Surface active technology reduces static and dynamic friction and considerably lowers the force needed for easy breakaway, providing smooth action throughout the entire range of travel. Contains special seal conditioners for extended seal life. Ultra-clean detergents keep the system clean and off long-life, trouble-free operation. For all lower fork legs and other non-damper suspension components, including All Mountain, XC, Gravel, Downhill, Enduro, and Freeride. Also approved for use in some dropper seat post designs. NOTE: Rockshox will be listing Plush Dynamic as the lower lube to use in all MY23 + beyond forks. Dynamic Light is a direct replacement for 0w30 in all forks specifying the use of Rockshox 0w30. Features - High-performance lube for lower fork legs. - Dynamic Lube activates on loaded bushings and seals. - Reduces static (stiction) and dynamic (running) friction. - Proprietary additive system minimizes wear and keeps the system clean. - Long-life fluid extends the time between rebuilds.

The use of cutting oil or fluid is extremely important when performing any cutting, tapping, facing or reaming operation and Park's Cutting Fluid is a high quality, environmentally safe cutting fluid that extends tool life and makes any frame prep job easier and safer. CF-2 can effectively be used on all metals.

Fills gaps and helps retain non-threaded parts like Press-fit bottom bracket parts, sealed bearings etc. Notice: Park Tool AP-1 Adhesive Primer must be used to prep all components, fasteners and carbon fiber surfaces prior to application of Park Tool threadlockers or retaining compound. Failure to do so could result in permanently bonded parts.

(MR) Micro Resistance Polymer Technology – is the ultimate in protection & performance for cup and cone bearings, cartridge bearings, headset bearings, suspension forks & shocks. With several compounds used in aerospace, Pro X formula is lighter viscosity while maintaining higher protection then other greases. Pro X MR Grease has less than 3% VOC's. Pro X MR Grease uses polymerization to create a barrier of grease at the contact points which reduces wear, provides corrosion protection and is waterproof. Designed to have the correct tact for bearing to roll and not skip that creates a flat spot. Dumonde Tech's Pro X Liquid Grease can be used to thin the viscosity of Pro X MR Grease. Does not become sticky due to age and oxidation like inexpensive greases will. Our MRCC Micro Resistant Complex Compounds have been in development for over 10 years by Dumonde Design Group. MRCC technology provides premium lubrication by reducing friction better than other lubricants. Lighter viscosity while maintaining high protection. The increase in adhesion creates higher film strength. Originally developed for our motorsports lubrication, MRCC, is incorporated into our revolutionary Pro X bicycle lubricants. Benefits: - MR GREASE reduces resistance and reduces watts used. - MR GREASE is very durable through all riding conditions. - MR GREASE is waterproof. - MR GREASE is safe on all parts of a bicycle. - MR GREASE has no shipping restrictions, can be sent anywhere in the world by air or ground. - MR GREASE has <3% VOC's.

- Highly efficient carbon fiber assembly compound designed to prevent over-tightening and create a secure coupling between surfaces - Carbon Gripper creates friction between carbon fiber clamping areas and lowers clamping torque without causing fatigue or internal fractures or shortening component life

- Ultra concentrated! Just one 16oz bottle of 16X Concentrate will make SIXTEEN 16oz bottles of Green Fizz bike wash! - Advanced plant-derived surfactants quickly remove tough dirt and grime from the whole bike. - Use on the whole bike without risk of damage or washing away grease/lube from critical parts. - Safe, biodegradable, phosphate-free, solvent-free, plant-derived, and zero-VOC. Green Fizz 16X Concentrate is a game-changer. Its the same incredible bike wash, only in ultra concentrated form! Just one 16oz bottle of 16X Concentrate will make SIXTEEN 16oz bottles of Green Fizz bike wash! So what is the big deal? It's all about re-using that perfectly good spray bottle you already own, reducing energy use, and saving money! Using Green Fizz 16X Concentrate drastically reduces packaging, shipping cost, and removes 14 plastic bottles from the waste stream. If that is not already reason enough, Green Fizz 16X Concentrate is an incredible value and allows you to boost strength for tough jobs or dilute further for even more economy. The improved Green Fizz bike wash safely, naturally, & effectively removes tough dirt & grime from the whole bike. Developed specifically for bicycle washing, Green Fizz can safely be used on any material without risk of damage or washing away grease/lube from critical parts. The pre-activated, biodegradable formula uses advanced plant-derived surfactants and incredible foaming action to reach surfaces and loosen dirt allowing it to be easily wiped or rinsed away leaving your bike looking like new. Free of harsh chemicals, gentle enough to use on any material, fully biodegradable, phosphate-free, solvent-free, plant-derived, and zero-VOC.

Recommended by DT Swiss for lubrication of star-ratchets on all DT Swiss hubs. - Molykote tp 42 with 5% mineral oil added to mixture

- Fast and effective grease-cutting formula - Removes all chain oil and wax residue - Safely eliminates drive chain contaminants - Biodegradable - Ideal for use with chain cleaning devices - Safe for metal, plastic, rubber and seals

Bio ChainBrite Bicycle Chain and Component Cleaning Fluid is a 100% biodegradable, natural, plant-based degreaser formulated for use in Park's CM-5.2 Cyclone Chain Scrubber or as a general purpose degreaser. It won't harm alloy, plastic, or rubber parts. Use CB-4 full strength, do not dilute with water. Cover parts in solvent and scrub using a brush. 16-ounce bottle

Threadlockers lock threaded assemblies and keep them from loosening. Notice: Park Tool AP-1 Adhesive Primer must be used to prep all components, fasteners and carbon fiber surfaces prior to application of Park Tool threadlockers or retaining compound. Failure to do so could result in permanently bonded parts.

Threadlockers lock threaded assemblies and keep them from loosening. Notice: Park Tool AP-1 Adhesive Primer must be used to prep all components, fasteners and carbon fiber surfaces prior to application of Park Tool threadlockers or retaining compound. Failure to do so could result in permanently bonded parts.

- Highly versatile dry weather chain lubricant - Deep penetrating, durable P.T.F.E. chain lubricant - Hold up to extreme conditions which can destroy ordinary lubes - Comfort bottle with pipette system for ease of use and application

Keep your precious steed in tip-top condition with the Muc-Off Harsh Condition Barrier. With a state-of-the-art thin film coating, it'll make light work of rust and corrosion. It's the perfect upgrade for winter months, or to keep your bike looking fresh all year long – as you'll have 12 months of protection. This innovative product is a must-have. It'll keep moisture out, creating a durable anticorrosive layer of protection on your bike's frame, chain, metal parts, plastics and paintwork. And on parts that have already got some rust showing, it'll get rid of it altogether. To make it super easy to check that you're protected, we've added a UV dye. With a UV light* you can check it's correctly in place and ready to protect your bicycle, e-bike or motorcycle. So you can get out there and enjoy the ride, no matter what the weather. *UV light sold separately FEATURES: - Quick and easy to apply - Dissolves existing rust - 300+ hours salt spray to ASTM B-117 - Thin transparent film - Strong capillary action allows the product to get into tight cracks and crevices - Contains UV application dye to ensure complete protection - Resistant to hot, cold and salt-water - Ideal for use in harsh environments - Creates a self-healing barrier, active for up to 12 months - Safe to use on electrical components, paintwork, and most rigid plastic trim - Contains no wax silicon, Teflon or water - Perfect for bicycles, e-bikes and motorcycles

- Ultra durable, long distance chain lubricant - Excel in long distance wet or muddy conditions - It penetrates deep into the chain links core to provide long lasting lubrication and total protection - Extreme pressure additives coat every part of the link to provide silky smooth gear change and ultra efficient drivetrain

Finish Line® 1-Step™ is perfect for commuters and recreational cyclists seeking a quick and easy clean and lube solution. 1-Step™ loosens and removes surface grime, before leaving behind a clean, low-friction film of high-performance lubricant. 1-Step Cleaner & Lubricant helps prevent premature component wear, reduces pedaling friction, and eliminates drivetrain noise. It’s formulated with corrosion inhibitors that provide excellent rust protection in extreme conditions and coastal salt-air. 1-Step™ does not compromise on its ability to reduce pedaling friction over long intervals. • Fast and easy application • Cleans and lubricates chains in one simple step • Penetrates to flush out old lube and contaminants • Leaves behind a low-friction film of high-performance lubricant • Reduces friction, prevents chain wear, protects components • Can be applied to both clean or dirty bicycle chains • Provides maximum rust protection, even in salt-air • Ideal for commuters and cyclists on the go • Apply to bicycle chains before putting into storage

- New high-pressure turbo spray - Easily cuts through tough grease in seconds - No rinse, heavy duty formula - Can be used on chains, gears and individual components - Works on tough waterproof grease and chain wax

Finish Line's Dry Lubricant with Teflon keeps your bike running silky-smooth rain or shine. It's very thin yet extremely durable thanks to its synthetic oils and Teflon particles. Great for your chain, cables, cleats and springs, its dry surface texture minimizes the accumulation of dirt and grit. Plus, it's biodegradable. - Great for dry, dirty and dusty environments. Attracts less grime and runs clean - Holds up well in moderately wet conditions - Can be used on derailleurs, shifters, cables and brake pivot points - Finish Line's most popular and versatile lubricant

Finish Line® Super Bike Wash™ is ready to use and requires no water rinsing. It quickly cleans dirt, dust, clay, grime, chain soils, nutritional residues, and winter storage grunge off all surfaces of your bike. Super Bike Wash™ uses state of the art, eco-friendly cleaning agents that work together to create a high speed cleaning system. It requires little to no scrubbing. Super Bike Wash™ is non-toxic and meets the highest readily biodegradable standards. It can be safely used indoors or outdoors. Super Bike Wash™ can be used two ways: spray on and wipe off, or spray on and hose off. It is strong enough to remove surface grime from the drivetrain, and safe enough to remove grime build up on frames, saddles, brakes, and handlebar tape. It is safe for use on carbon fiber, titanium, aluminum, steel, and clear coat. • Ready to use with no water rinsing required • Safe for use on all surfaces and paint finishes • 100% readily biodegradable and non-toxic • State of the art cleaning agents remove dirt and grime • Superior rust inhibitors protect metal parts after application • Also available as a concentrate

Finish Line WAX Lubricant goes on wet, but dries to a hard, dry, super-slick wax film. No oily greasy film to attract or absorb dust and dirt. DuPont's metal bonding Krytox® lubricating film in combination with M2 molybdenum, specialized waxes, and more, make our WAX Lube even slicker, quieter and longer lasting. WAX Lube requires more frequent application, but your drivetrain will remain nearly contaminant-free, so cleaning before relubing is not usually required. Drivetrain parts that stay this clean last longer and work better! Perfect for cyclists who value cleanliness over all else.

High-performance brake and clutch fluid designed to lubricate and protect critical brake system componentry while providing reliable stopping power. Anti-vapor lock formulation maintains responsiveness and performance by fighting both water contamination and vaporization. Advanced chemistry resists corrosion, and oxidation and is compatible with SBR, EPDM, and natural rubbers. Exceeds the requirements of US FMVSS 116 DOT 5.1, DOT 3 & DOT 4, SAE J1703, SAE J1704, and ISO 4925 (Classes 3, 4 and 5.1). For use in all hydraulic clutch systems and all brake systems specifying DOT 5.1 brake fluids. Do not use in DOT 5 silicone brake systems or mix with silicone-based fluids. Features: - For use in all vehicles specifying DOT 5.1 brake fluid. - Durable and reliable stopping power. - Anti-vapor lock formulation maintains a responsive lever and pedal feel. - Resists corrosion, oxidation, and boil-off. - Mixes with other DOT 3, DOT 4, and DOT 5.1 brake fluids. - Exceeds US FMVSS 116 DOT 5.1, DOT 3 & DOT 4, SAE J1703, J1704 and ISO 4925 (Classes 3, 4 and 5.1).

We worked diligently on our next generation of bicycle chain lubricant for several years. Our Micro Resistant Complex Compounds (MRCC) had been in development for over 10 years. Originally developed for our motorsports lubrication, MRCC technology creates a lighter viscosity while maintaining high protection, reducing friction, and increase in creating much higher film strength than common, traditional technology. PRO X LITE Bicycle Chain Lubricant Like our Regular chain lube, cyclists who tested or raced using PRO X Lite, report it to perform better then any other lube they have ever used. Even those riders that use our Standard Lite and Original chain lubes. A bold statement even for us to claim, but comes from years of technology, formulation, and testing. PRO X Lite brings the aspect of polymerization and MRCC oils that by design migrate for complete wetting of the surfaces. Benefits: - MRCC technology creates an extremely low friction bond. - A dry lubricant that does not attract dust and dirt. - Watts. Very little is used to move your bike parts. - 10 time high lubricity the Teflon. Ceramic lubes? Catchy hype. - Waterproof which will not wash off. - Drive train stays clean, last longer, runs silent. - Extremely durable, outlasts all other chain lubes in any condition. - Tamely scented. - Applied sparingly for the best results and increased value. - Can be shipped around the world via air freight and ground. PRO X LITE is the lighter version to our PRO X REGULAR chain lubricant. PRO X LITE is ideal for a road bike, wet or dry, and extreme dry off-road trail conditions or over cyclist you are prone to over applying. PRO X LITE can be used on all cables, pivots points and seals. Safe on plastic, rubber, and all seal materials. The product is designed to not harm your components. Our products are engineered to perform with minimal "carbon footprint" by not washing off in water, to use sparingly, lasts longer between applications, your drive train lasts longer. Very good performer in extreme cold conditions.

Dumonde Tech worked diligently on our next generation of bicycle chain lubricant for several years. Our Micro Resistant Complex Compounds (MRCC) had been in development for over 10 years. Originally developed for our motorsports lubrication, MRCC technology creates a lighter viscosity while maintaining high protection, reducing friction, and increase in creating much higher film strength than common, traditional technology. PRO X REGULAR Bicycle Chain Lubricant Everyone who has tested or raced using PRO X reports that performance is better than any other lube they have ever used. Even those riders that use our Standard Lite and Original chain lubes. A bold statement even for us to claim, but comes from years of technology, formulation, and testing. PRO X REGULAR brings the aspect of polymerization and MRCC oils that by design migrate for complete wetting of the surfaces. Benefits: - MRCC technology creates an extremely low friction bond. - A dry lubricant that does not attract dust and dirt. - Watts. Very little effort is used to move your bike parts. - 10 times higher lubricity than Teflon. Ceramic lubes? Catchy hype. - Waterproof which will not wash off. - Drive train stays clean, lasts longer, and runs silent. - Extremely durable, outlasts all other chain lubes in any condition. - Tamely scented. - Applied sparingly for the best results and increased value. - Can be shipped around the world via air freight and ground. PRO X REGULAR is the heavier version to our PRO X LITE chain lubricant. PRO X REGULAR is ideal for Mountain Bike, Cyclocross, and all extreme condition, while maintaining a clean drive train. PRO X REGULAR can be used on all cables, pivots points and seals. Safe on plastic, rubber, and all seal materials. The product is designed to not harm your components. Our products are engineered to perform with minimal "carbon footprint" by not washing off in water, used sparingly, lasts longer between applications, and your drive train lasts longer. Very good performer in the extreme cold conditions.

Finish Line's E-Shift Groupset Cleaner is specially formulated to keep your sensitive and expensive electronic drivetrain clean and safe. It quickly and safely removes grit, grime and moisture from electric shifting drivetrain components, including the front and rear derailleur, derailleur pulleys, chain, cassette and even the crankset. E-Shift is safe and will not harm the wires or electronics. Plus, it dries in minutes leaving the drivetrain parts clean, and with no rinsing required.

- PLUSH Suspension Oil - Formulated specifically for mountain bike suspensions - Designed for use in both forks and shocks - Reduces stiction and running friction - Consistent damping performance at any temperature - Proprietary additive system minimizes oxidation, corrosion and wear - Designed to protect seals and extend time between rebuilds

- PLUSH Suspension Oil - Formulated specifically for mountain bike suspensions - Designed for use in both forks and shocks - Reduces stiction and running friction - Consistent damping performance at any temperature - Proprietary additive system minimizes oxidation, corrosion and wear - Designed to protect seals and extend time between rebuilds

- PLUSH Suspension Oil - Formulated specifically for mountain bike suspensions - Designed for use in both forks and shocks - Reduces stiction and running friction - Consistent damping performance at any temperature - Proprietary additive system minimizes oxidation, corrosion and wear - Designed to protect seals and extend time between rebuilds

- PLUSH Suspension Oil 7wt - Formulated specifically for mountain bike suspensions - Designed for use in both forks and shocks - Reduces stiction and running friction - Consistent damping performance at any temperature - Proprietary additive system minimizes oxidation, corrosion and wear - Designed to protect seals and extend time between rebuilds

- Frees seized parts - Disperses moisture to prevent rust and corrosion - Provides light lubrication for moving parts - Reduces metal-to-metal contact - Prevents dirt adhesion - Cuts down on friction to improve component efficiency

- Creates a dry ceramic coating for increased durability and performance in dry condition - Excels in dry and dusty conditions - Biodegradable - Integral UV tracer dye and UV torch to aid accurate application and ensure total protection

- Creates a ceramic coating for incredible durability and long distance performance - Provides ultra low friction for ultimate drivetrain efficiency - Waterproof qualities excelling in wet conditions - 95% biodegradable

Dumonde Tech's PRO X Liquid Grease is a very high-performing replacement for traditional viscosity grease. PRO X Liquid Grease using our MRCC Micro Resistant Complex Compounds greatly reduces the coefficient of friction. PRO X Liquid Grease polymerizes and bonds to the surfaces which provide extremely low drag, high sheer strength, and protection. PRO X Liquid Grease will migrate to heat to provide lubrication at critical areas. PRO X Liquid Grease is highly recommended for steel and ceramic cartridge bearing. Waterproof, which protects bearings from corrosion. Hybrid (Ceramic balls, steel races) bearings are prone to corrosion and wear without a lubricant. PRO X Liquid Grease is the perfect solution. PRO X Liquid Grease essentially eliminates drag that grease-packed steel bearings experience. You will have a drag-free bearing, especially in freezing temperatures. Great for suspension fork legs, full suspension pivots, wheel bearings, roller bearing, and jockey wheels. A proven application for spoke nipple and rim interface. Can be used as a chain lube for very extreme muddy conditions of mountain bike and cyclocross riding or racing. PRO X Liquid Grease can be used with our PRO X MR Grease to add viscosity if needed. Our MRCC Micro Resistant Complex Compounds have been in development for over 10 years by Dumonde Tech Design Group. MRCC technology provides premium lubrication by reducing friction better than other lubricants. Lighter viscosity while maintaining high protection. The increase in adhesion creates higher film strength. Originally developed for our Motorsports lubrications, MRCC, is incorporated into our revolutionary PRO X bicycle lubricants. Everyone who has tested or raced using PRO X, reports that it performs better than any other lube they have ever used. Benefits: - PRO X reduces resistance and reduces watts used. - PRO X products have no shipping restrictions, can be sent anywhere in the world by air or ground. - PRO X has low VOCs.

Keep your brakes performing at their best with Avid's DOT 5.1 Brake Fluid. They're compatible with all Avid disc brake seals. You'll get a 4-ounce bottle of fluid.

Lubricating a chain is an essential, but often dreaded task. It can be time-consuming and often results in lubricant landing on the frame, wheels, braking surfaces, and the ground. Thanks to the No Drip Chain Luber every link can now be properly lubricated in seconds, without making a mess or wasting a drop.

Heavy-duty, non-flammable degreaser specifically designed to remove lube, dirt, mud, sand, and other contaminants from bike drivetrains. Unique and proprietary formulation thoroughly cleans all bike drivetrains without harming rubber o-rings or metal surfaces. Non-toxic, non-flammable, and eco-friendly formulation contains no VOCs, harmful acids, CFC’s, or solvents and is 50 state VOC compliant. Makes a great all-purpose wash when diluted 10:1 with water. For use as a bicycle drivetrain degreaser. Safe for incidental contact with other bicycle components. Can be used as an all-purpose bike wash when diluted 10:1 with water. Features - Specially designed for bike drivetrains. - Professional strength formulation. - Safe on o-rings and metal surfaces. - 100% biodegradable. - Contains no VOC's, harmful acids, CFC's or solvents. - Non-flammable.

- High performance Lithium complex grease that excels in a multitude of conditions, from light duty chassis applications to extreme conditions such as wheel bearings - Formulated with a high dropping point and a robust antioxidant system, the NLGI Grade 2 grease remains stable and effective at extreme temperatures - Lithium complex thickener and high-quality base oils combine with an advanced additive package to ensure excellent protection against wear, water washout, corrosion and oxidation

- Incredible water dispersing action to protect, preserve and freshen your bike - Perfect all-over after wash corrosion inhibitor - Drives out moisture and leaves a sparkling non-sticky protective layer on your frame, drivetrain, metal parts and paintworks. - Ideal before applying chain lube - Contains P.T.F.E. - P.T.F.E. to prevent dirt adhesion between washes and reduces future maintenance time as well as helping reduce friction - Do not apply on tire and braking surfaces - HazMat item not eligible for air shipment

- Bio Formula easily cuts through tough grease - Can be used on chains, gears, and individual components - Water-soluble formula for easy cleaning - Works on tough waterproof grease and chain lube residue - HazMat item not eligible for air shipment

- Incredibly effective cleaning formula containing Nano Technology that also cares for your bike's delicate finishes - Contains no harmful acids, CFC's or solvents and is fully biodegradable - Cuts through dirt, oil and grime quickly and safely leaving your whole bike sparkling clean

- Highly effective foam cleaner which is ideal for helmet liners, pads, gloves, shoes, body armors or any soft material which comes into contact with the rider - Instant foaming action, which gently agitates dirt and grime away from the surface leaving a fresh citric burst fragrance

- Professional strength cleaner specifically designed to remove grease, oil and other contaminants from electrical components - Unique and proprietary formulation displaces moisture and is completely non-corrosive and non-staining - CFC-free and VOC compliant cleaner safely cleans electrical components, dries quickly and leaves behind no moisture, residue or film

Professional strength cleaner specifically designed to clean suspension internally and externally. The unique and proprietary formulation combines industrial-strength cleaners with a powerful spray to ensure maximum cleanliness while leaving a dry and residue-free surface. Suspension Clean is strong enough to eliminate tough-to-clean grime and debris, but safe enough for incidental contact with Nitrile (buna-n), Viton, and most seal materials. For use on internal and external suspension components. Safe for incidental contact with most seal materials, but not suitable for use on silicone-based rubber. Never soak rubber materials. Avoid spraying on painted surfaces. May be harmful to some plastics. Features: - Formulated specifically for the industry professional. - Industrial strength cleaners remove tough-to-clean grime and debris. - Dries completely, leaving no film, residue, or moisture droplets. - Safe for incidental contact with most seal materials. - No harsh chemical smell.

- Safe on all matt finishes including vinyl wraps - Streak and gloss free - Quick to use - Creates a durable hard wax coating - Dry and non-sticky formula - Protects from water marks and staining - Solvent free and environmentally friendly

Muc-Off's eBike All-Weather Chain Lube is a high-performance synthetic chain lube specifically designed for the hi-torque loads applied to an eBike chain. The unique water repellent, non-fling formula penetrates deep into the chain link, to create a durable protective coating which guards against corrosion and metal-to-metal wear. A unique blend of extreme pressure additives ensures the lube can stand up to even the most powerful e-bike drivetrains. - Specifically formulated for eBike chains - For long-distance all-weather on/off-road riding

HPG-1 Park Tool High Performance Grease is proprietarily blended to meet the demanding needs of today’s high performance bicycles and high end components. -Superior adherence and extended lubrication life -Extreme temperature range: -20°F to 540°F (-29°C to 282°C) -Highly water resistant -Perfect for high end applications including precision ground and ceramic bearings, pivots and suspension components 4-ounce (113 g) tube

Zipp's Bearing Grease is perfect for your home workshop and traveling toolbox, too. It's a quality lubricant designed to minimize friction and maximize the life of your components. And it's easy to apply with its 20ml syringe container.

You train to get fitter and stronger so why train riding a germ fest?! Muc-Off's indoor training cleaner is an advanced all-purpose cleaner for all indoor trainers and gym equipment. Suitable for: Aluminum, stainless steel, carbon, plastic and vinyl. Just spray and wipe. No rinsing necessary. - Safe on all surfaces - Ensure you can train in a clean and healthy environment - Apple fragrance

Muc-Off Sweat Protect uses state of the art anti-corrosion additives and inhibitors to provide class leading protection against corrosion. It drives out moisture and leaves a protective anti-corrosive layer on your bike’s frame, metal parts, and paintwork to keep the harmful effects of moisture and sweat at bay. - For use all over indoor trainers and all gym equipment - Non-drying film - Rust preventing / anti corrosion - Integral tracer dye that shows under UV light– aids accurate application to ensure total protection - Protection lasts up to 3 months - Mask braking surfaces before application. Store in a cool, dry place. Do not apply to tyre tread or braking surfaces

Superior, all-purpose penetrating lube that displaces water and provides excellent rust and corrosion protection. Unique and proprietary formulation forms a durable film that provides protection against both wear and corrosion. MPPL is the perfect choice for anywhere that a penetrating or multi-purpose lubricant is needed, whether on equipment in the garage, or hinges and locks in the house. For use wherever rusted or corroded parts need freeing, or as a light lubricant. Features: - Prevents rust, corrosion, and wear. - Durable film keeps protecting long after initial application. - Will not harm rubber, plastic, or painted surfaces. - Suitable for use on O, X, and Z-rings. - Great for lubing pedals, shifters, and derailleurs. - Safe on most materials.

Bring your shoes back to life! The Muc-Off Premium Footwear Shield is an epic environmentally-friendly spray-on treatment that’ll dial up the water repellency levels of your shoes, giving your feet the ultimate protection for your next ride or adventure, no matter how gnarly it gets. The Footwear Shield works in a very similar way to the Rain Shield DWR to create a durable water repellent on the surface of the shoe. We use an advanced polymer technology as the basis of our footwear shield. We then combine this with a range of silicone and wax emulsions to ensure our product is as versatile as possible and can be used on a range of different materials. Additionally, this blend of repellents provides the best solution to getting a repellent finish when air-dried. *Check your shoe manufacturer care instructions before use. - Suitable and safe to use - specifically designed for bike shoes - Advanced polymer technology offers excellent performance without using harmful chemicals - Water-based formula - Safe on technical fabrics, suede, nubuck, leather and other fabrics - Added conditioning additives for leather, nubuck and suede - Hydrophobic - offers excellent water repellency - Improves resistance to dirt and oil - Maximizes breathability - PFC-free/non-hazardous - Effective without heat activation - Handy sized 250ml spray bottle

Park's SuperGrip Carbon Assembly Compound is a combination of grease and tiny particles and is ideal for lubricating, protecting and tightening carbon components, like seatposts, handlebars and stems. SuperGrip solves the problem of carbon parts moving and slipping, which can happen if they are not lubed, or you apply standard grease or lube to them. It also works well with aluminum and steel components.

DOT 5.1 brake fluid is compatible with all SRAM and Avid hydraulic disc brakes - Brake Fluid Type: DOT 5.1 - Bottle Size (Brake Fluid): 4 oz - Application (Brake Fluid): Disc Brakes

High performance suspension fluid formulated to provide fade-free performance. Proprietary additive eliminates stiction, friction and wear, and protects against foaming, seal-swell, oxidation and corrosion.

E-Bike Chain Lube is designed to handle the unique requirements of electronic assist bicycles. E-Bike chains are exposed to higher torque and wattage loads. With this in mind, Finish Line engineered a light wet lube with unique extreme pressure additives to ensure that the lube stays within the premature wear and protecting against rust and corrosion. Finish Line’s E-Bike Chain Lube is an ideal complement to any dealer specializing in e-Bike sales and service.

High-performance hydraulic fluid designed specifically for use in seat posts. The OEM-recommended formulation reduces friction, ensuring fast, quiet action with minimal drag. High viscosity index formulation ensures consistent drop and return speeds under all conditions. A proprietary additive system protects seals, minimizes wear, and prevents corrosion, improving performance throughout the seat post life. For use in all hydraulic seat posts. Features: - Formulated to reduce friction and drag. - Consistent fast and quiet action. - Resists fade to ensure consistent drop and return speeds. - Protects components and ensures optimal performance throughout seat post life. - OEM-approved and recommended.

- Makes drivetrain cleaning quick, easy, and safe. Perfect in the Chain Pig! - Incredibly effective pre-activated formula quickly removes oils, soils, and grime. - Safe on any material, biodegradable, solvent-free, plant-derived, and zero-VOC. Developed specifically for our grime-devouring Chain Pig chain cleaner, Pig Juice is an impressively effective and economical degreaser/cleaner that makes bicycle drivetrain cleaning quick, easy, and safe for anyone from novice to professional. Pig Juice features an advanced pre-activated formula that quickly penetrates & loosens, removing oils, soils, and grime with less scrubbing & rinsing, and leaves spotless residue-free parts. Free of harsh chemicals, gentle enough to use on any material, fully biodegradable, fragrance-free, dye-free, solvent-free, plant-derived, and zero-VOC.

- Incredibly clean and efficient in dry and dusty conditions. - Runs quiet, long-lasting, and repels water, dust, and grime. - Safe plant-based ingredients. Formulated with Pedro's exclusive CleanTech Chemistry, Slick Wax blends advanced wax and polymer technology for maximum cleanliness and elevated efficiency in dry and dusty conditions. Runs quiet, reduces wear, long-lasting, and repels water, dust, and grime. CleanTech Chemistry is a proprietary approach to chain lubrication chemistry developed by Pedro’s to achieve new standards of performance using ingredients that are safe for mechanics and riders. Chain lubes commonly feature toxic ingredients that are unsafe for the user and harm the environment. With CleanTech Chemistry, there are no compromises. CleanTech Chemistry lubes share a similar base chemistry but each employs a unique lubricant package designed to optimize the chain surface coating characteristics and maximize performance for the intended riding conditions, while keeping the drivetrain exceptionally clean.

TUNE Your Parts is a lubricant spray specially designed for derailleurs and all other components. This long-term lubricant contains PTFE, making it a water-repellent solution that also protects against corrosion and wear while reducing friction. This ensures smooth interplay between parts. This lubricant also features biodegradable components that are easy on the environment. - Formulated for bearings, derailleurs, and chainrings - Spray-on applicator for even application - Capacity/Volume: 100ml - Made in Germany

SRAM'S Jonnisnot Shifter Grease is a fluorocarbon lube perfect for steel-on-composite applications and for brake and shift cables. It minimizes friction and maximizes the performance of your components. You'll love the easy-to-use 20ml syringe container, too.

Whether you're fine-tuning your new full-suspension rig or tuning a fork you've ridden for years, Finish Line's Max Suspension Spray is a pro-grade stiction-fighting stanchion lubricant that maximizes the performance of your suspension. It smooths suspensions that have become dry or dirty and restores full travel and eliminates noise, too. Use Max before rides to ensure maximum responsiveness over the smallest of bumps, and the longest possible travel over extreme terrain. And, use Max to break in new forks or bring old ones back to life. It also conditions and protects rubber seals and O-rings and improves the surface slip of coated stanchions. - Helps suspension forks run more smoothly and quietly - Made with polysiloxane and advanced fluoropolymers

- Film forming lubricant designed to protect moving components and wear surfaces during assembly and initial break-in - Shields metal-To-metal contact and offers excellent rust and corrosion protection during long service periods and storage - Formulated with high levels of anti-Wear and extreme pressure additives and surface active chemistry to reduce friction. Two times zinc activates at both high and low operating temps providing unsurpassed protection. Non-Foaming