Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Wheels

$85.99 - $144.99
Champion 2.0 Black Spokes - One 264mm spoke = 7g
$4.29
- Soft and elastic for an easy mounting - Resistance to high pressure: 8 bar / 116 psi - High resistance to punctures - Sold by the unit
$83.99
Our Trainer Axle is designed to adapt your thru-axle equipped bike to on-wheel trainers, such as a 1up, Blackburn, Cyclops, Kinetic, Tacx, Wahoo, and many others. Our goal is to fit the thru-axle to your bike perfectly to minimize spacers and extra parts, providing a clean, high-performance axle for your bike. Train, warm up, and be race ready and fit for the season. - When it’s time for your race or time to head outside, simply remove your bike from the trainer, remove the drive side axle end and go. Our axle is suitable for use on or off the trainer, indoors or out. - The axle shaft and axle ends are precision CNC-machined from 7075 aluminum and hard-anodized for rugged durability. - No special tools required. Design allows for installation or wheel removal using your standard 5mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world. Important: Before you order, make sure your specific trainer will accommodate the width of your modern thru-axle-equipped bike. Measure your trainer at the widest setting and measure the outside width of your bike frame. Our the trainer axle ends will extend past your frame on each side.
$54.99
Rims: EVO Tour 20 - 26'' (ETRTO 559) - Inner width: 19.8 mm - Recommended tire size range: 26" x 1.5'' to 2.25'' - Anodized black finish - Pinned joint - Drilled for Schrader valve - 36 holes Front hub (-01) : Alloy, Sealed, Quick Release, Hollow CrMo axle M9x100mm - Anodized black finish - Adjustable bearings - Quick Release Binders Included Assembled in North America by experienced wheel builders using Sapim 14G Stainless Steel spokes and 14mm Brass Polyax Nipples
$109.99
- Anodized black finish - CNC machined sidewalls - Stainless steel eyelets - Rim wear indicator - Pinned joint - Drilled for Schrader valve - 36 holes Rear hub: Alloy, Disc and Rim brake compatible, Shimano HG, Sealed, Quick Release, Hollow CrMo axle - Anodized black finish - Adjustable bearings - Quick Release Binders Included Assembled in North America by experienced wheelbuilders using Sapim 14G Stainless Steel spokes (Black) and 14mm Brass Polyax Nipples (Black)
$159.99 - $229.99
- Rims: WTB ST i30 (Black), inner width: 30 mm - New TCS 2.0 Tubeless system - Solid Strip (included) protects and ensures a smooth surface between the tire and the rim - Easy On-Ramp profile allows for a smooth tire installation and stress-free inflation - Industrial Epoxy reinforced Pinned Joint provides repeatable tubeless consistency - Drilled for Presta valve - 32 holes - Rear hub (1): Formula DHT148 (Black), Laser etched logo, 12mm TA, O.L.D. 148mm BOOST - Rear hub (2): Formula DC2241 (Black), Laser etched logo, M9x141mm BOOST141 - HG Freehub compatible with 8—10, MTB 11-speed - 6-bolt Disc mount - Sealed Bearings (DC711 & DHT148) - TA Axles, not incl. - Quick Release binder incl. (DC2241) - Assembled in North America by experienced wheel builders with Sapim 14G Stainless Steel spokes (Black) and 14mm Brass Polyax Nipples (Black) - Tubeless Compatible (Tubeless Valve included)
$39.99
- 3-piece kit to secure wheels and seatpost - MTB 100mm/135mm - Seatpost: M6 x 45mm
$169.99
- Position Rear - Wheel Diameter/ISO 700C / 622 - Axle Type QR - Hub Spacing 130mm - Wheel-Brake Comp. Rim - Freehub Body Shimano HG - Wheel Tire Type Clincher - Rim Material Aluminum - Rim Construction Double wall - Rim Internal Width 13.9mm - Rim inner width range 0-21.9mm - Rim Color Black - Rim Drilling 32 - Hub Model Shimano Sora FH-RS300 - Wheel Weight - - Spoke Type Stainless - Valve Presta - Rim External Width 19.6mm - Depth 22mm - Rim Model Alex DA22 - Skewers Included Yes
$89.99
- Position Front - Wheel Diameter/ISO 700C / 622 - Axle Type QR - Hub Spacing 100mm - Wheel-Brake Comp. Rim - Freehub Body - - Wheel Tire Type Clincher - Rim Material Aluminum - Rim Construction Double wall - Rim Internal Width 16.6mm - Rim inner width range 0-21.9mm - Rim Color Black - Rim Drilling 32 - Hub Model Shimano Sora HB-RS300 - Wheel Weight - - Spoke Type Stainless - Valve Presta - Rim External Width - - Depth 27mm - Rim Model Evo E-Tour 16 - Skewers Included Yes
$69.99
- EVO E-Tour 20 24" single wall rim - Silver - Inner Rim Width: 19.8 mm - Rim Height: 16.8 mm - Pin joint construction - No Eyelets - Schrader valve - 36 holes
$114.99 - $119.99
- Rims: Evo Tour 16 700C - ETRTO 662-17 - 6061-T6 Alloy - Double Wall with CNC machined sidewalls - Inner width: 16.6mm - Profile height: 27mm - Drilled for Presta valve - 32 holes Front hub: Shimano Tiagra HB-RS400 - 9x100mm - Polished angular contact bearings - Contact sealed hub - Quick Release Binder (Internal Cam) included Front hub (Bolt-on): Formula TH-50 Assembled in North America by experienced wheel builders with Sapim 14G Stainless Steel spokes and 14mm Brass Polyax Nipples
$79.99
- Evo Tour 19 26" double wall rim - Inner Rim Width: 19 mm - Rim Height: 20 mm - Pin joint construction - No Eyelets - Schrader valve - 36 holes - Stainless steel spokes - Silver
$364.99
Rims: WTB HTZ i30 27.5" - ETRTO 584-30 - Inner width: 30mm - 6061 series aluminum - Asymetric and angled spoke hole drilling distributes spoke tension more evenly - Reinforced I-Beam profile - Strong sleeved joint - Drilled for Presta valve - TCS 2.0 Tubeless System compatible - Solid Strip included - Tubeless valve included - 32 holes Rear hubs options: Shimano XT FH-M8110-B (Boost, MS) - Center Lock (6-Bolt adapter included) - Quick Engagement Freehub, 36 Points of Contact, 10 deg. engagement - HG compatible Shimano 11spd and Sram NX / SX splined 12spd (10spd and below needs spacer) - MS compatible 12 Spd Shimano Micro Spline Assembled in North America by experienced wheelbuilders with Sapim Race spokes (Black), Polyax Nipples (Black)
$649.99 - $719.99
- Designed, tested, and raced to victories on the World Cup DH and Enduro World Series circuits - Tie beam triple-cavity rim design resists damage and prevents air loss under impacts - 29mm internal width optimized for 2.35" to 2.8" Trail, All-mountain, and DH tires - E-sync hubs Specs: - Wheel Tire Type: Tubeless Ready - Wheel-Brake Comp.: Disc IS 6-bolt - Rim Material: Aluminum - Spoke Type: Sapim D-Light - Valve: Presta - Rim Construction: Double wall
$131.99
Stan's ZTR Arch EX rim combines the lightweight design of their race-specific rims with more internal reinforcements to create a super-strong, singletrack-ready rim. The Arch EX also uses Stan's BST technology for easy tubeless conversions, while its wide inner profile and lowered sidewalls boost tire volume for enhanced traction.
$2.99 - $8.99
Wheels Manufacturing Outer Axle Nuts are high-grade steel nuts that provide secure wheel fixing for solid-axle wheels. - 14mm x 1mm (1411-AN) sold in pairs - All others sold individually
$194.99
- Compatible with 26 to 28" wheel sizes - Light alloy QR lever and nut - 6V, 3.0W output
$219.99
A tough, tubeless-compatible 29-inch disc wheelset in new-school boost thru-axle spacing. - Pinned construction double-wall rim with new-school 29mm internal width, tubeless compatibility, offset/asymmetrical construction, and hookless construction - Asymmetric rims w/offset spoke holes for better triangulation of spoke angles and balance of tensions in a wheel build, resulting in a stronger, stiffer, and more reliable wheel - Joytech Boost thru-axle alloy 6-Bolt hubs w/serviceable cup and cone bearings - Shimano steel freehub: 8/9/10/11sp MTB compatibility - 6-Bolt disc compatible only - Reinforced head plain gauge 14G/2.0mm Stainless Steel spokes (black) w/12mm brass nipples (black) - Weight: 1230g
$19.99 - $35.99
Axle conversion kits for Race Face Turbine/Aeffect hubs. - Select from front or rear applications
$349.99
Rims: WTB EZR i23 700C - ETRTO 622-23 - Inner width: 23mm - Made from 6069 series Aluminum alloy - Asymetric and angled spoke hole drilling distributes spoke tension more evenly - Stronger and lighter rim using a sleeved joint - Disc Brake Only - Drilled for Presta valve - TCS 2.0 Tubeless System compatible - Solid Strip (included) - 32 holes Front hub: Shimano 105 HB-RS7070 - 12x100mm E-THRU (Axle not included) - Center Lock Disc Mount - Polished angular contact bearings with Internal Grease Sleeve - Contact sealed hub Rear hub: Shimano 105 FH-RS7070 - 12x142mm E-THRU (Axle not included) - Center Lock Disc Mount - Polished angular contact bearings with Internal Grease Sleeve - Contact sealed hub and freehub body - Compatible with 11 speed Road (10 speed compatibility requires 1.85mm spacer, not included) - Assembled in North America by experienced wheelbuilders with Sapim Race Butted Stainless Steel spokes (Black) and 14mm Brass Polyax Nipples (Black)
$149.99
- Rims: WTB ST i23 (Black), inner width: 23 mm - New TCS 2.0 Tubeless system - Solid Strip (included) protects and ensures a smooth surface between the tire and the rim - Easy On-Ramp profile allows for a smooth tire installation and stress- free inflation - Industrial Epoxy reinforced Pinned Joint provides repeatable tubeless consistency - Drilled for Presta valve - 32 holes - Rear hub: Shimano FH-M4050 (Black), Shimano logo, M10x135mm - HG Freehub compatible with 8—10, MTB 11-speed - Center Lock disc mount - Adjustable bearings - Rear Quick Release binder included - Front E-THRU Axle not included - Assembled in North America by experienced wheelbuilders with Sapim 14G Stainless Steel spokes (Black) and 14mm Brass Polyax Nipples (Black) - Tubeless Compatible (Valve and Tape not included)
$339.00 - $450.00
The entry into the world of gravel riding, the G 1800 SPLINE 25. If you want to give cycling a try and plan to do your first rides off-road the G 1800 SPLINE 25 should be your ideal choice of wheels. Combining all the key advantages of our gravel segment wheels at a very attractive price point these wheels may be your entry into the world of gravel riding. Leave your beaten roads and turn to the unexplored paths, the G 1800 SPLINE 25 will join you! • Quality sleeved aluminum rim • Tubeless Ready 24mm inner width • DT Swiss Ratchet LN system • Includes TL ready tape, TL valve, Sram XDR freehub body • 1820g (650b) / 1835g (700c)
$2,450.00
The XMC 1200 Spline is the ultimate all mountain wheel. A carbon layup specifically tuned for all mountain use makes the rim tough yet super-light. The hubs feature the latest incarnation of DT's Ratchet System. Extremely refined machining and fully lasered graphics make them the lightest hubs DT Swiss has ever made. Together with bladed top-end spokes and perfect DT Swiss build quality, this wheel is made to ride trails with speed and confidence. - Requirement-specific carbon rims are designed for the ultimate all-mountain riding experience - The carbon rim combined with the DT Aerolite and DT Aero Comp spokes ensure perfect wheel stiffness - The low weight of the 1200 Spline reduces the moment of inertia and increases acceleration, leading to higher average speeds compared with aluminum wheels with the same energy input - Alloy presta valve is lightweight - Wheels are tubeless ready, with a rim design that ensures a precise and safe fit of the tire even when ridden hard - Nipples have DT Pro Lock to prevent the spoke-nipple connection from loosening - Rear wheel has a SRAM XD freehub body mounted, but includes a Shimano Micro Spline freehub kit - EXP ratchet system for a lighter, stiffer, and more durable hub
$1,490.00
The ARC 1400 DiCut wheels also benefit from the AERO+ profile supporting safe riding in the aero position through optimal aerodynamics. The combination of new and proven aero components allows cyclists to control many riding situations at high speeds. - AERO+ optimized rims by Swiss Side - Stainless steel bearings
$2,100.00
The ARC 1400 DiCut delivers its full potential whenever your race turns nasty. In gusty wind conditions and on hilly, twisting courses, these wheels give you a decisive advantage, allowing you to stay in the aero position and save valuable power. Small and light riders will love the wheels' superior aero stability, making them a perfect choice for almost every terrain. - AERO+ optimized rims by Swiss Side - Stainless steel bearings
$520.00 - $560.00
After a long climb, the perfect trail lies ahead of your tires: flowy, dusty, varied, endless. Nothing holds you back from entering the All-Mountain thrills with the M 1900 Spline wheels. A rim developed with optimal balance of durability and weight offers efficient climbing characteristics as well as dent resistance on single trails. With experienced wheel building by hand, this wheel is a reliable partner to collect freewheeling moments in the mountains. - Intended use = XC and All-Mountain/Trail - Tubeless ready, 30mm wide and light rim - Straight-pull hubs/spokes built with a 3-cross pattern - Includes Tubeless Valve and Tape, 6-bolt adapter with lockring
$73.99
Rear axle conversion kits convert your hub to fit a new axle measurement or for a new group set. All DT Swiss hubs can be converted.
$319.99
- Replacement freehub bodies include pawls and springs pre-installed - M-Pulse hubs: six pawls are equipped with Neodymium magnets engaging every 1.66 deg - E-Sync hubs: fast 8.18 deg engagement with reinforced high-torque pawls - HG 11sp road FH body
$231.99
The FR 541 may not be your first rim, but it aspires to be the last. The new rim shape improves the impact resistance, enabling you to push a little harder on the trails. It also enhances the pinch flat protection for a trusty ride on rougher tracks. Build this rim with care and it will reward you with resistance and lightness for a long-lasting bond. - Aluminum welded construction, hooked tubeless design - PHR – Pro Head Reinforcement system increases the load-bearing surface of the nipples on the rim and reduces localized stresses - Provides a 17% increase in pinch flat resistance compared to the previous FR 560 rim - Disc brake only
$67.99
Clean and Simple is always best. Leverless design for added security and clearance for when situations get tight. These super tough axles tighten up with a 6mm Allen key. They feature "a get out of jail" 6mm Allen key on the drive side of the axle if you manage to round the non-drive side. Dropout Bolt is also provided. Constructed from 7075 Aluminium and made to the manufacturer’s exact specifications.