Problem Solvers' 11-speed Freehub Spacer converts your 11-speed freehub body to accept a 10-speed casssette. Use this spacer if you are running a 10-speed drivetrain on a new set of wheels with a 11-speed freehub body. The spacer is 1.85mmm thick.
The Problem Solvers Backstop bolts onto the frame to provide two stops for your cable housing. It's made of light, durable CNC-machined aluminum with a stainless-steel bolt, and the stops are slotted for easy cable installation/removal.
Problem Solvers' Braze-on Light mount threads into your fork or fender eyelets, allowing you to mount lights or accessories. It's lower position is great for getting your light closer to the ground for better visibility.
$99.99 - $119.68
The Problem Solvers Cable Doublers are made of light, durable machined and anodized aluminum and they are Teflon coated for a super-smooth cable pull every time. They come in two models. The first allows you to control two brakes with one lever. The second allows you to control one brake with two levers. Why? Well, there are myriad applications: tandems, cyclocross bikes, fixies, tricycles, recumbents, cycles for those with special needs, bike polo bicycles, those 4-person bikes you see on beach boulevards, and so on. You could even link both models of Cable Doublers together for the ultimate in redundancy!
The Problem Solvers Cross Clamp mounts to the seat tube on your frame so that you can make your top-routed shift cables work with a bottom-pull front road derailleurs. This is a common setup on cyclocross bicycles. Choose the diameter that matches your frame.
Mounting electronic shifting systems challenges the most prolific of bike mechanics. When small frames, recumbents, or adaptive cycles are involved, the standard battery mounts don't accommodate. This mount accepts the small Di2 or EPS battery mounts and comes with zip ties to attach that battery anywhere on the frame you need it. Tech Details: Machined AL-6061 main body Includes: four zip ties, rubber shim and two M4 bolts
$49.94 - $53.99
The Problem Solvers Direct Mount Adapter gives you a place to install direct-mount Shimano and SRAM derailleurs. It was initially developed for standard mountain bike frames with 68/73mm wide bottom bracket shells, and is equally suited to fat/snow bikes, where their 100mm wide bottom brackets make front derailleur applications a little difficult. The adapter is made of light and durable 6061 aluminum.
$23.92 - $27.99
The Problem Solvers Double Chainring Bolts include chainring bolts and nuts that are 10mm wide. This is the right size for most double-chainring setups with a bashguard. These chainring bolts are made of aluminum and feature dual-hex heads for easy, secure installation.
The Problem Solvers Eccentric Bottom Bracket E46 for PressFit 30 Frames fits frames with 46mm internal-diameter bottom-bracket shells and accepts cranksets with 24mm spindles. The eccentric allows 16mm of fore/aft adjustment for ample chain tensioning. This bottom bracket comes with spacers to fit Hollowtech II, MegaExo and X-Type cranksets. And an adapter kit for GXP cranksets is sold separately (CR0097).
The Problem Solvers Micro-Adjustable Headset Spacer goes on the fork (it requires 10mm of clearance on the steerer) and locks in place to retain your headset bearing adjustment. This makes it possible to run your fork and headset without a star nut or compression plug. This 2-part threaded component is made of CNC-machined aluminum with a small bolt for tightening, so it's light and durable.
$59.99 - $64.99
Problem Solvers' MisMatch Adapters allow you to combine your Shimano and SRAM shifters and brakes onto a single clamp for a more ergonomic, less-cluttered handlebar. These CNC-machined aluminum adapters work with Shimano I-Spec and SRAM MatchMaker components to fasten your preferred combination on to a single, existing bar clamp.
Notched binder bolts for frames with integrated seat collars. Details: CroMoly steel bolts Three lengths available: 16, 19 and 21mm 8mm diameter
$12.99 - $14.99
The Problem Solvers Seatpost Shim is what you need when your seatpost is a little too small-diameter to fit tightly into your frame. It's made of light, durable aluminum and has a lip on the top so it won't slide down inside the frame during installation.
Switching frames doesn’t mean you have to switch posts! Use your old posts without worry with Problem Solver's wide variety of seatpost shims. -100mm long -3mm lip -Alloy Problem Solvers Seatpost Shims are not intended for use with carbon seatposts
The Problem Solvers Sheldon Fender Nuts are an awesome way to avoid the brake-centering problems caused by mounting fenders directly to your brakes. They're named after the inventor and bike guru, Sheldon Brown. These special Sheldon nuts take the place of your existing brake nuts. They have threaded extensions for standard 6mm bolts (sold separately) providing a secure mounting place for your fenders that won't mess with your brake adjustment. They make it easier/faster to install and remove fenders, too, so they're great for commuting bicycles.
The Problem Solvers Shifter Boss Covers are perfect for covering up the down-tube shifter bosses when you're converting a frame with them to a singlespeed/fixie setup. They're made of light, durable aluminum and sport a nice polished finish.
The Problem Solvers Universal Derailleur Hanger is a handy thing to keep on hand (and even bring on epic off-road rides or extended tours) because it makes it relatively easy to fix a damaged/bent derailleur hanger, which is a pretty common breakdown. This CNC-machined 6061-aluminum hanger takes the place of the drive-side quick-release nut providing a straight hanger to mount your derailleur to. You'll still be able to shift into many of your gears, too.
Page 1 of 1