Other

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss Driver Spring - Ratchet EXP

Tight tolerances and precise torque specs mean precision parts like this MegaExo 12 Left Arm Crank Bolt need to be replaced from time to time. Make sure the heart of your drivetrain is secure, and pick up a spare or two today.

Mounts at dropout to prevent derailleur damage. - Cut-outs allow smooth cable routing - Durable steel construction

A traditional saddle clamp for use with vintage, older and inexpensive seatposts without an integrated clamp. - For use only with plain/pin-style seatposts that require a separate saddle clamping mechanism at the top - One bolt tightens the clamp to the rest of the seatpost and to the saddle rails at the same time. - 22.2mm / 7/8 fit with angle adjustment via serrated washers - Steel construction with ED black finish

- Enough clamp bolts for 4 clamps

Replacement M8 Nut/Bolt Set for Wheels Mfg derailleur hangers. - M8 chainring bolt style fastener - Use with 5mm hex wrench

Aluminum headset stack spacers precision cut to ensure proper headset function. - Precision cut for proper function

Aluminum headset stack spacers precision cut to ensure proper headset function. - Precision cut for proper function

Aluminum headset stack spacers precision cut to ensure proper headset function. - Precision cut for proper function

- 90 degree

- Noodle/Boot completely seal brake cable, upgrades most linear brakes

Disc Brake Adapters

RockShox Rear Shock Parts

Eyelet Bushings for repair and maintenance of Rockshox rear shocks.

Internal components for servicing the Reverb and Reverb Stealth mechanism.

Internal components for servicing the Reverb and Reverb Stealth mechanism.

Internal components for servicing the Reverb and Reverb Stealth mechanism.

Internal components for servicing the Reverb and Reverb Stealth mechanism.

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss Driver Spacer - Alloy, 10.7, EXP

Traditional style barrel adjuster that fits Mission brake levers and many others. Product Specifications - Size: M7 x P1.0 - Compatibility: Mission and Most OEM Levers - Weight: 0.1oz

Parts for the service of the seal and restore the smooth cycling of KS dropper posts.

Parts for the service of the seal and restore the smooth cycling of KS dropper posts.

Compression ring fits above the upper bearing in a Cane Creek headset to ensure vertical and horizontal compression is optimal. - Compatible with 41mm and 42mm OD upper bearings

This is a MegaExo Left Crank Bolt for 19mm MegaExo Cranks. - M12 bolt

Flat head screws from Wheels Manufacturing.

Hose Kits, Barbs and Strain Relief for Servicing Reverb Lines.

Internal components for servicing the Reverb and Reverb Stealth mechanism.

Replacement inserts for Thudbuster G4 suspension seatposts. - Cane Creek ST G4 Elastomer Insert - X-Soft

Replacement inserts for Thudbuster G4 suspension seatposts. - Cane Creek ST G4 Elastomer Insert -Firm

Replacement inserts for Thudbuster G4 suspension seatposts. - Cane Creek ST G4 Elastomer Insert -Medium

KMC Missing Link connectors are for use on new chains or to keep in your seat bag for an emergency repairs. - Compatible with Campagnolo 10-speed chains

Chain tensioner bolts that fit all current Kink aftermarket frames. - Thread: M6 x P0.7mm

- Converts 140 post mount to 160 or 160 post mount to 180mm - Simplified and lower profile design allows for the use of only 2 bolts instead of 4 - Compatible with all TRP and Tektro disc caliper 160, 180, and 203 rotor sizes

Flat Mount Disc Caliper Bracket Bolts

Replacement foam rings and bottom out bumper for your REVIVE MAX dropper post. The foam ring in the lower tube of your BikeYoke dropper post is a crucial component that prevents water and dirt from entering your post too easily. Keep it dry and clean at all times so your post can breathe and replace if needed. Kit includes: - 2x foam ring - 1x bottom out bumper

Replacement foam rings and bottom out bumper for your BikeYoke dropper post. The foam ring in the lower tube of your BikeYoke dropper post is a crucial component that prevents water and dirt from entering your post too easily. Keep it dry and clean at all times so your post can breathe and replace if needed. Kit includes: - 2x foam ring - 1x bottom out bumper Fits: - REVIVE (not REVIVE MAX) - DIVINE - DIVINE SL - DIVINE SL Rascal

Small parts for Wolf Tooth ReMote.

- Grade 10 chromium steel balls

Parts for the service of the seal and restore the smooth cycling of KS dropper posts.

Clutch switch lever and fixing plate for Shimano XTR RD-M9100. Product of Japan.

Ohlins adapter kit for fitting the EVO Bolt-on fenders to your OHLINS forks. Compatible with RXF 38 (2019+) and DH forks. Minimum Fork Offset: 44mm Compatible with Mudhugger EVO Shorty Bolt-On and EVO (Long) Bolt-On fenders. Kit includes: - 1x Ohlins adapter Bracket - 3x M4 bolts - 1x Hex key

The ZEB Adapter for fitting the EVO Bolt-On fenders to your Rock Shox ZEB fork. Minimum Fork Offset: 44mm Compatible with EVO Shorty Bolt-On and EVO (Long) Bolt-On fenders. Kit includes: - 1x ZEB adapter bracket - 3x M3 bolts - 3x M3 washers - 1x 3mm bolt sleeve

RockShox XLoc Parts

Customize your ride with SRAM bar end plugs.

Forged Alloy seat-clamp.

- Missing links to make chain installation, maintenance and reparation easier - Reusable up to 3 times - Compatible with 6, 7 and 8 speed IG drivetrains - Pin width: 7.1mm - Card of 2

Saddle clamp heads and lowers for KS Dropper posts.

Replacement bushings for Cane Creek shocks.

- Grade 10 chromium steel balls

Parts for the service of the seal and restore the smooth cycling of KS dropper posts.

Bottom bracket cup and spindle spacers for adjusting chainline or bearing play.

Notched binder bolts for frames with integrated seat collars. Details: CroMoly steel bolts Three lengths available: 16, 19 and 21mm 8mm diameter

- Missing links to make chain installation, maintenance and reparation easier - Card of 2

Bottom bracket cup and spindle spacers for adjusting chainline or bearing play.

Bottom bracket cup and spindle spacers for adjusting chainline or bearing play.

Our clever Splits clamp attaches our Triggy directly to the handlebar. Special plastic compounds and production process allow flexibility within the clamp to have it installed, while grips and brakes are still on the bars. Just snap it on! A heat treated inlay made of stainless steel with a laser engraved finish, give it a unique and classy look. By the way: SRAM shifter triggers can also also be attached to the handlebars using our Splits clamp.

Replacement elastomers for Thudbuster LT suspension seatposts allow the rider to tune for weight.

Replacement elastomers for Thudbuster LT suspension seatposts allow the rider to tune for weight.

Replacement elastomers for Thudbuster LT suspension seatposts allow the rider to tune for weight.

Replacement elastomers for Thudbuster LT suspension seatposts allow the rider to tune for weight.