Grips

- Made with DuPont Kevlar brand resin for softer, tackier and longer lasting grips - Used by top professional racers around the world

All the quality and performance of SPANK's SPOON grips, in a new 100mm length specifically designed for kids. One of the most common complaints of young riders is that adult grips position their hands too far from the controls, making them move their hands around while riding, or risk pinching fingers in brakes. The new SPOON Grom grips alleviate this issue, putting their hands in the right place every time, and allowing them to set up their handlebar controls just like dad! Material: Tacky rubber, alloy clamp rings Length (mm): 100 Diameter (mm): 30 Weight (g): ±95/set Features: Tailored to fit children's hands; two anodized alloy clamp rings; plastic safety end plugs; micro diamond pattern

Serfas' RX Grips have been medically engineered to eliminate numbness and fatigue. Strategically placed Ulnar Grooves divert pressure from critical nerves and arteries. Plus, the diamond shape top layer and dual-density compound provides an excellent grip and absorbs vibration for a super-smooth ride and total control and comfort.

The Format is our first single clamp grip for those who like to make use of the full width of their bars, allowing you to run your hands right up to the edge. We had found some single clamp grips suffer from additional twisting, which is why we designed the sleeve to snugly fit the bars towards the ends. After examining wear patterns of grips that have been through the ringer, we implemented several different patterns and zones into the format to deal with the different dynamics going on in each part of your hand.

The DMR DeathGrip is the second collaboration between DMR and Brendog. We started with an internally tapered single-lock core grip and wrapped Brendan's design around it in super-soft Kraton compound. • NEW colours added to the DMR Brendog DeathGrip range for 2021. • Tapered Core | No need for outer lock ring • Waffle and Knurl for grip • Mushroom for comfort • Available in Thin (ø29.8) or Thick (ø31.3) • Soft durometer of 20A for all colours, apart from Gum which is a harder but longer lasting 25A. • 100g per pair

Keep your bike looking good with SRAM's DoubleTap Lever Hoods matching your frame. They're made of a soft, grippy rubber and will enhance any bike's appearance.

Gel rubber construction for excellent durability. - Variable diamond pattern profile for maximum grip and shock absorption - Dual lock-down clamps for maximum security - 130mm length - 33mm diameter

Gel rubber construction for the optimum balance of comfort and durability. - Diamond pattern provides excellent grip

The ultimate standard in grip comfort and beauty is now available in a single sided lock version. Anti-vibration, large pad design eliminates numbness and slipping for any size hand. The extremely soft rubber will give you excellent control and maximum comfort. Handsomely detailed design adds beauty to any bike. Made in the U.S.A. -Compatible with MTB, BMX, ATV, PWC -5 1/3" long measuring front clamp to end of grip (135 mm) -7/8" I.D. (22.25 mm) -1 1/3" O.D. (33 mm) -4.3 ounces (122 grams)

Keep your bike looking good with SRAM's DoubleTap Lever Hoods matching your frame. They're made of a soft, grippy rubber and will enhance any bike's appearance. They fit RED 22, Force 22 and RED 10-speed ErgoDynamic shifters.

"Make a grip with the fussiest rider on the planet, you must be mad!!" The Bartender Pro is the next level in grip design for Burgtec. We've collaborated with 3x World Champion Greg Minnaar to hone the construction of this grip to produce unrivaled vibration dampening. - 31.5mm Diameter. - 30A Rubber Compound - Single Lock On

Single aluminium clamp design with covered/hidden bolt - Dual-compound with soft grip area and harder endcaps for impact and scratch protection - Non-centric, offset-design. The grips are indeed round, but the rubber is thicker on the rear side, so we have around double the rubber thickness on the palm side - Cut-out inner sleeve for extra rubber thickness on the palm outside for even more extra padding and damping - Relief pattern on the outside palm area (rider facing) and on the fingertips area (front side) for feeling and grip - Weight: 113g /pr - Length: 140mm - Diameter (rubber part): 31mm - For handlebar diameter: 22.2mm

The GS1 Evo reimagines what ergonomic comfort can be for touring, trail and E-Bikes by minimizing aching hands and numb fingers. Ergon took the best-selling GP1 winged grip and evolved it with popular characteristics of the mountain specific GA3. The GS1 Evo features a larger supportive wing than the GA3 and a sleeker profile than the GP1, a specific textured grip zone for the thumb, fingers and palm and a softer overall touch. Always prioritizing materials, the GS1 Evo is composed a proprietary rubber compound Made in Germany. From quick jaunts across town to endurance events to journeys across continents, the GS1 Evo is a new favorite among many riders! - Ergonomic performance comfort grip - Reduces hand and wrist discomforts - Made in Germany

- 31mm grip with micro diamond pattern - Kevlar infused TRC + rubber compound

NEW SUPERLIGHT XC GRIP FOR 2022! In cooperation with an extensive industrial network in Germany, Ergon‘s Research & Development Team has created a new grip for the Ergon line-up. The new foam-like material offers high damping thanks to the unique material characteristics and achieves a precise texture that matches the zones of the hand. Until now, this was nearly impossible with simple ultralight grips on the market today. Ergon GXR - hand ergonomics and lightweight proprietary AirCell Rubber compound 100% made in Germany! - Size Small: 32mm / 80 grams - Size Large: 34mm / 95 grams - Use: XC, Marathon, Bikepacking, Endurance - Grip material: proprietary AirCell Rubber - SGS Certified for purity and quality - Right and Left hand specific grips. - Completely new grip material for increased damping on your favorite trails. - Optimized form allows for reduced gripping force. - Grip zones are matched to the hand. - Replaceable end plug. - Carbon bar compatible. - No inner core. - No locking clamp.

Oury single compound grips. Simple & classic. - Soft grips with raised blocks

ODI Bjorn lock-on V2.1 grips. Made from recycled post-industrial rubber from ODI's manufacturing, the Bjorn grips have an offset center to provide additional cushion without extra bulk. - Made from recycled TPE rubber - Single-sided lock on

The Cult Vans grips feature a classic Vans waffle pattern and are made by ODI in the USA using their proprietary rubber compound. - Made in the USA by ODI - Length: 150mm

- Dual Density Design - Integrated, 1pc Lock-On - Tapered Inner Core – prevents slippage - Mushrooms for ultimate comfort - Ergonomically ramped and undercut grabbers for superior grip - Ovalized design for ultimate comfort and control - Circular Iconic dampers - Flared outer ends

The Descendant grip is for the performance-driven hard charger who needs maximum grip and confidence in their cockpit. Featuring a full-width contact area that extends from the inner clamp right to the end of the bar. The ridged pattern allows for a soft-to-touch feel and makes for superior grip and control. Available in solid colors, marble and gum options, these grips give you the option to match grip performance with your personal style. - Single-ring clamp for max width and comfort - Available in Black, Gray, Gum Rubber, Red, Gray/Black Marble and Red/Black Marble - Soft and durable ridged rubber grip pattern - Length: 133mm - Clamp: Single

Overwhelming demand for a diamond version of the Deity Knuckleduster lead us to the phenomenal feel of the Lockjaw.. With sweeping transitions from the padded thumb area to the deep dish diamond top pattern to a recessed half waffle, the Lockjaw delivers a technically precise feel from end to end. Utilizing TRC+ rubber compound allows us to maintain industry leading durability but delivered in a soft, plush and sticky durometer. By combining our tapered inner sleeve and single lock ring system coupled with our new extra grippy rubber and recessed half waffle, the Lockjaw gives you an extremely responsive feeling cockpit

The Kink Samurai grips, as the name suggests, were inspired by the amazing craftsmanship used in Japanese Samurai swords. Beautiful design, quality craftsmanship, and the best materials. With this all in mind, the Samurai grips are manufactured by ODI in the USA using ODI's propriety rubber compound. The grip pattern itself has also been inspired by Samurai sword handles, creating a superior gripping surface. A perfectly paired set of plug style bar ends are also included. TECH SPECS - Material: Proprietary ODI Rubber - Length: 150mm - Diameter: 29mm - Bar Ends: Includes Kink Samurai Bar Ends

The Knuckleduster features a tapered internal sleeve that you have to tap onto your handlebar for full engagement. This tapered sleeve feels like it is already locked into place once fully tapped onto the bar and coupled with a single bolt lock-on clamp, you will not develop any play. The body of the grip combines the best elements of a half-waffle, mushroom ribbing, and an ergo feel. Featuring a mushroom pattern to minimize vibration. The Knuckleduster grips are an all day grip that allow you to keep it Pinned Wide Open at all times.

- Dual Density Design - Integrated, 1pc Lock-On - Tapered Inner Core – prevents slippage - Mushrooms for ultimate comfort - Ergonomically ramped and undercut grabbers for superior grip - Ovalized design for ultimate comfort and control - Circular Iconic dampers - Flared outer ends

- Easy-install, lock-on design - Dual-density Kratyon rubber construction - Oversized palm rest prevents hand fatigue - 131mm

Ergon GD1 Evo slim factory grips. - Shape: Round - Length: 144mm - Lock On: Yes - Grip Shift Specific: No - Weight: 120g - Flange: No

- Made from ODI proprietary soft compound material - Classic Ribbed design provides improved vibration dampening - 160mm Length - Push-in style end plug - Handlebar Diameter: 22.2mm

DEITY Grip Clamps offer a way to customize your bike to match your style.

The Elite Pro grips feature an ergonomic design that conforms to a rider's hands without feeling bulky. - Single clamp design - Half-waffle pattern on the front of the grip provides extra control when you are off the back of the bike - Length: 130mm

The Ergon grip with a 2-finger, mini bar end, delivers more hand positions and improved leverage and stability when climbing or during out-of-the-saddle cycling. The bar end angle can be adjusted independently from the angle of the grip for the perfect personal fit and the bar end doubles as a clamp to lock the grip in place and prevent movement while riding. Like all the grips in the GP Series, the GP2 eliminates numb hands, aching fingers, and tired forearms. The GP2 is made from 100% German, TÜV-certified rubber compounds of the purest quality. - Carbon bar compatible - Uses: mountain biking, touring, commuting - Clamp: fiberglass composite with rubber inserts