Grips

The Cult Vans grips feature a classic Vans waffle pattern and are made by ODI in the USA using their proprietary rubber compound. - Made in the USA by ODI - Length: 150mm

The Cult Vans grips feature a classic Vans waffle pattern and are made by ODI in the USA using their proprietary rubber compound. - Made in the USA by ODI - Length: 150mm

The classic flangeless Longneck ribbed grip pattern with an open end to accommodate end plugs now gets an extra 25mm of length! PRODUCT FEATURES: - Classic mushroom style collapsible rib pattern - Constructed of our proprietary grip SOFT compound for added comfort! - Increasingly popular with top athletes around the world - Open ends with Push In Plugs end plugs included - Sold In Pairs - 160mm

Oury single compound grips. Simple & classic. - Soft grips with raised blocks

- Made from ODI proprietary soft compound material - Classic Ribbed design provides improved vibration dampening - 160mm Length - Push-in style end plug - Handlebar Diameter: 22.2mm

This flangeless mushroom style grip is made in the USA by ODI grips using their super-soft rubber compound, which, combined with our specially designed rib profile, makes for a great-feeling and long-lasting grip. Includes our new USA-made Eclat nylon bar plugs. - Includes Eclat nylon bar plugs - Longer design for today's wider bars - Manufactured in the USA by ODI

The Denim Cox signature Grime Grip features a traditional mushroom pattern in the super soft sticky Krayton rubber that you've come to expect from BSD. The design has reinforced slime at the ends for extra durability and a debossed Grime skull with missing teeth, just like Denim... - Flangeless mushroom design made from soft Krayton rubber - Forever bar ends with washers

Leezy was cutting the inner flange off his Paley Slims so that the mushroom part of the grip went right to the end. His reason being that that it was comfier to catch barspins on. BSD designed the new Leezus Handles around that idea, coupled with their new softer stickier compound these slim grips feel as good as they look.

Simple mushroom style design made of Krayton rubber. - Flangeless slim mushroom design - Bar ends included

Dan Paley signature grips: Dan Paley is really fussy when it comes to grips, not too fat, not too thin, not too squishy, the list goes on. The Dan Paley Slims however are just right. - Flangeless Dan Paley zigzag design - Krayton rubber - Bar ends included

Oury single compound grips. Simple & classic. - Soft grips with raised blocks

All the quality and performance of SPANK's SPOON grips, in a new 100mm length specifically designed for kids. One of the most common complaints of young riders is that adult grips position their hands too far from the controls, making them move their hands around while riding, or risk pinching fingers in brakes. The new SPOON Grom grips alleviate this issue, putting their hands in the right place every time, and allowing them to set up their handlebar controls just like dad! Material: Tacky rubber, alloy clamp rings Length (mm): 100 Diameter (mm): 30 Weight (g): ±95/set Features: Tailored to fit children's hands; two anodized alloy clamp rings; plastic safety end plugs; micro diamond pattern

Spoon Grips have an incredibly slim, low profile design and grip pattern, yet remain reasonably comfortable due to a special tacky rubber compound. Double locking alloy rings keep them secure in any conditions, and soft plastic end plugs protect you from barends. Need the confidence of locking grips without the high price, try a set of Spoons! - Micro diamond pattern tacky rubber grip - Two anodized alloy lock ring clamps - Length: 130mm - Diameter: 30mm - Weight: 110g/pair - Plastic end cap included

60g per pair with end caps - 130mm long - 32mm OD

Gel rubber construction for the optimum balance of comfort and durability. - Waffle grip pattern provides excellent grip and vibration dampening - Flange provides added contact enhancing control - Flange cut-away provides shifter and thumb clearance - OD: 30mm - Length: 135mm

Foam rubber construction for ultimate comfort - Outer lock-down clamp for ultra-quick and secure installation - 130mm length - 33mm outer diameter

Gel rubber construction for excellent durability. - Variable diamond pattern profile for maximum grip and shock absorption - Dual lock-down clamps for maximum security - 130mm length - 33mm diameter

Luxurious EVA foam. - Excellent OEM replacement - With adhesive backing - 210 x 3cm - Black screw-in end plugs included - A whole spectrum of color options

Cinema Focus grips are proudly manufactured in the USA by none other than ODI, using ODI's superior rubber material. The flangeless design features a generous 160mm (6.3") width and super comfortable 30.5mm (1.2") diameter. Thin, mushroom-style ribs fold over to conform to your hand, making these grips super comfortable and grippy. The subtle offset octagonal profiles provide even more grip while still being ultra-thin and soft to give that perfect feel. Sold in pairs and include plug-style bar ends. - Length: 160mm - Diameter: 30.5mm - Bar ends: Plug Style - Weight: 3.3 oz

- Easy-install, lock-on design - Dual-density Kratyon rubber construction - Oversized palm rest prevents hand fatigue - 131mm

- Secure, easy-to-install dual clamping design - Soft, comfortable rubber - Vibration reducing grip pattern - Slip-resistant rubber improves grip - Bar plugs included

- Soft Kraton rubber construction - Hexagonal texture for superior all-weather grip - Simple tube shape for comfort - Easy-install, lock-on design - Single locking alloy clamp - End plugs included - 130mm

The flangeless Kink Ace grips feature a super comfortable wrapped style pattern, that may look a bit familiar to a lot of riders. The combination of both thick and thin ribs creates a mixture of comfort, grip, and support. Soft Kraton rubber material and a mid-sized 29mm diameter give these grips a perfect traditional feeling. Flush plug style barends are included with the grips, fully protecting them from rips and tears. - Material: Soft Kraton Rubber - Length: 150mm - Diameter: 29mm

The Kink Samurai grips, as the name suggests, were inspired by the amazing craftsmanship used in Japanese Samurai swords. Beautiful design, quality craftsmanship, and the best materials. With this all in mind, the Samurai grips are manufactured by ODI in the USA using ODI's propriety rubber compound. The grip pattern itself has also been inspired by Samurai sword handles, creating a superior gripping surface. A perfectly paired set of plug style bar ends are also included. TECH SPECS - Material: Proprietary ODI Rubber - Length: 150mm - Diameter: 29mm - Bar Ends: Includes Kink Samurai Bar Ends

F-1 Series Float Grips are made from our exclusive A.I.R.E. compound which infuses air into the grip, reducing weight by over 30% and providing a slower rebound and response for improved comfort. - Medium diameter (31.5mm) - Reinforced inner layer for added durability - Micro-textured surface pattern improves tackiness and control - Smooth profile for a consistent feel

The Bartender, the Jagermeister of grips. No fuss rubber, lock on and rock out. The combination of a tacky rubber compound and the knurled pattern offers the bench mark in traction and durability. - Weight 90g - Single lock on - Low profile design - 30mm Diameter

F-1 Series Vapor Grips are made from our exclusive A.I.R.E compound which infuses air into the grip, reducing weight by over 30% and providing a slower rebound and response for improved comfort. - Medium diameter (31.5mm) - Reinforced inner layer for added durability - Added surface pattern provides improved grip in all conditions - Ergonomic finger cutouts for a better gripping surface and improved control

- Italian cork tape, includes bar end plugs

Superior hand feel that you need to feel to believe. Winner of world cups, Cape Epics, and stages of La Ruta de Conquistadores. - Material: Dual-density high-performance rubber - Supacaz pattern design for max control and ultimate tackiness - Diameter: 32mm - Star Ringz: 100% Aluminum - Anodized/powder coated - Laser-etched

Designed for the XC racers. 5mm of 100% silicone compound provides excellent vibration dampening and superior comfort. - 100% Silicone weather resistant material - Plastic bar end plugs - 5mm thick

SRAM's Locking Foam Contour Grips offer the soft feel of foam with the easy installation and security of a lock-on grip.

SRAM's Locking Foam Grips offer the soft feel of foam with the easy installation and security of a lock-on grip.

Keep your bike looking good with SRAM's DoubleTap Lever Hoods matching your frame. They're made of a soft, grippy rubber and will enhance any bike's appearance.

Plush, high grip, perforated polymer tape - 210 x 3cm - Waffle texture with super gel - Adhesive backed - Black screw-in end plugs included

The Knuckleduster features a tapered internal sleeve that you have to tap onto your handlebar for full engagement. This tapered sleeve feels like it is already locked into place once fully tapped onto the bar and coupled with a single bolt lock-on clamp, you will not develop any play. The body of the grip combines the best elements of a half-waffle, mushroom ribbing, and an ergo feel. Featuring a mushroom pattern to minimize vibration. The Knuckleduster grips are an all day grip that allow you to keep it Pinned Wide Open at all times.

Overwhelming demand for a diamond version of the Deity Knuckleduster lead us to the phenomenal feel of the Lockjaw.. With sweeping transitions from the padded thumb area to the deep dish diamond top pattern to a recessed half waffle, the Lockjaw delivers a technically precise feel from end to end. Utilizing TRC+ rubber compound allows us to maintain industry leading durability but delivered in a soft, plush and sticky durometer. By combining our tapered inner sleeve and single lock ring system coupled with our new extra grippy rubber and recessed half waffle, the Lockjaw gives you an extremely responsive feeling cockpit

- 31mm grip with micro diamond pattern - Kevlar infused TRC + rubber compound

- The thinnest DEITY grip to date - Featuring soft DEITY TRC+ rubber compound for durability and increased grip - Tapered inner sleeve to ensure perfect contact with the handlebar - Single clamp design with forward facing bolts that feature loc-tite - Lasered black ano 6061 T6 aluminum clamps - Seamless transition through the end of the grip for comfort and full range of control - Diamond pattern wraps around the end of the grip - 133.75mm length with a 30.5mm outer diameter - Not compatible with bar ends or plugs - Intended use: All MTN / Enduro / DJ / Slopestyle and DH - 96 grams for the set INSTALLATION TIP: To fully and properly install your SLIMFIT grip due to the tapered inner sleeve...make certain to whack the end of the grip 3 times with the palm of your hand until the grip fully seats onto the handlebar. If you find the fit is a bit tight due to your particular handlebar, a small amount of Isopropyl Alcohol can work wonders for lubrication. Finish the install by tightening the hardware to the specs listed on the packaging.

We've redeveloped our TRC+ rubber compound to deliver 33% more grip and cushion without compromising the amazing durability you've come to expect from all DEITY Grips. Rounding out our grip line to offer something for everyone, the SUPRACUSH Grip delivers the most comfortable and deeply cushioned grip on the market. It's the perfect grip for riders of any hand size looking for increased vibration damping, a larger feeling grip, or a more supple ride. Not only does the SUPRACUSH give you an unmatched level of cushion with our TRC+ rubber compound, but the larger deep-dish diamond pattern offers the most comfortable grip possible without compromising control, precision, or durability. - 34mm outer diameter with plush cushioning throughout - Deep-dish DEITY diamond pattern compresses for comfort but also provides traction - Features soft DEITY TRC+ rubber compound for exceptional durability and increased grip - Tapered inner sleeve to insure perfect contact with the handlebar - Single clamp design with forward-facing bolts that feature Loctite - Lasered black ano 6061 T6 aluminum clamps - Seamless transition through the end of the grip for comfort - Capped end for safety and comfort - 133mm length with 34mm outer diameter - Intended use: All MTN / Enduro / DJ / Slopestyle / DH / and any other riding style of choice - 118 grams for the set

- Easy-install, lock-on design - Secure double-locking alloy clamps - Comfortable dual-density Kraton rubber construction - Ergonomic palm rest reduces pressure points - 130mm

A low profile single lock on grip, designed to reduce arm pump and hand numbness. The Diamond knurled texture, with saw tooth finger ramps and a super tacky 20A compound provide ultimate traction. More traction means less death-gripping the bars and less arm pump. Our single lock has the profile of your favorite double lock-on. But to reduce hand numbness we've replaced the hard outer clamp with extra rubber for greater cushioning of your palm heel. Get all the benefits of an “ergonomic” grip without the city bike cruiser look! SPECS - Weight: 97g (Pair) - Length: 136mm - Diameter: 30mm

- Dual Density Design - Integrated, 1pc Lock-On - Tapered Inner Core – prevents slippage - Mushrooms for ultimate comfort - Ergonomically ramped and undercut grabbers for superior grip - Ovalized design for ultimate comfort and control - Circular Iconic dampers - Flared outer ends

- Dual Density Design - Integrated, 1pc Lock-On - Tapered Inner Core – prevents slippage - Mushrooms for ultimate comfort - Ergonomically ramped and undercut grabbers for superior grip - Ovalized design for ultimate comfort and control - Circular Iconic dampers - Flared outer ends

- A totally new grip designed from the ground up to give you more control and comfort then ever before! - Single lock ring design and smooth thumb zone. - Reinforced bar end area - Anatomical bar end design supports and protects the little finger - Cut outs improve impulse shock, vibration absorption and comfort - Interlocking columns support low profile fins to create a tread pattern which offers the benefits of both a finned grip and a low profile - Features: Single lock grip, low profile 30mm diameter, tapered bar ends, Spank 'Human Factor' grip pattern. - Material: Rubber, alloy clamp, plastic base, steel bolt - Length (mm): 145 - Diameter (mm): 30 - Weight (g): ±115g / Pair

- A totally new grip designed from the ground up to give you more control and comfort then ever before! - Single lock ring design and smooth thumb zone. - Reinforced bar end area - Anatomical bar end design supports and protects the little finger - Cut outs improve impulse shock, vibration absorption and comfort - Interlocking columns support low profile fins to create a tread pattern which offers the benefits of both a finned grip and a low profile - Features: Single lock grip, low profile 30mm diameter, tapered bar ends, Spank 'Human Factor' grip pattern. - Material: Rubber, alloy clamp, plastic base, steel bolt - Length (mm): 145 - Diameter (mm): 33 - Weight (g): ±115g / Pair

- Clear, gel pads provide added shock absorption while positioned between the lever hood and top-handlebar transition under handlebar tape - Two, left and right sets with integrated channels for either inside or outside, under tape cable routing

Slightly thicker than the Razer Grips, slightly thinner than the Fat Paw Grips, these 6.5mm thick grips are great for longer rides, as they reduce hand fatigue and finger numbness. - 100% proprietary dual-density silicone compound provides excellent vibration damping and conforms to your hand for improved comfort while maintaining durability - Tacky texture provides excellent grip with or without gloves in all weather conditions - 6.5mm thick

• Replacement locking handlebar grip sets for XX1 Grip Shift • includes one 100mm right and one 122mm left grip • Available in black or silver.

- Made with DuPont Kevlar brand resin for softer, tackier and longer lasting grips - Used by top professional racers around the world

The Goats Grip just went Super Soft. Prototyped through the 2020 season and based on the World Cup Winning pattern of the Bartender Pro as used by Greg, as well as Nina Hoffman, Danny Hart and Angel Suarez. - Super Soft Compound - 31.5mm Diameter - Single Lock-on - Tapered Core

Ergonomic silicone grips from Wolf Tooth. - Multi-position ergonomic design - Unique design increases grip and comfort while climbing

Single aluminium clamp design with covered/hidden bolt - Dual-compound with soft grip area and harder endcaps for impact and scratch protection - Non-centric, offset-design. The grips are indeed round, but the rubber is thicker on the rear side, so we have around double the rubber thickness on the palm side - Cut-out inner sleeve for extra rubber thickness on the palm outside for even more extra padding and damping - Relief pattern on the outside palm area (rider facing) and on the fingertips area (front side) for feeling and grip - Weight: 113g /pr - Length: 140mm - Diameter (rubber part): 31mm - For handlebar diameter: 22.2mm

The DMR DeathGrip is the second collaboration between DMR and Brendog. We started with an internally tapered single-lock core grip and wrapped Brendan's design around it in super-soft Kraton compound. • NEW colours added to the DMR Brendog DeathGrip range for 2021. • Tapered Core | No need for outer lock ring • Waffle and Knurl for grip • Mushroom for comfort • Available in Thin (ø29.8) or Thick (ø31.3) • Soft durometer of 20A for all colours, apart from Gum which is a harder but longer lasting 25A. • 100g per pair

NEW SUPERLIGHT XC GRIP FOR 2022! In cooperation with an extensive industrial network in Germany, Ergon‘s Research & Development Team has created a new grip for the Ergon line-up. The new foam-like material offers high damping thanks to the unique material characteristics and achieves a precise texture that matches the zones of the hand. Until now, this was nearly impossible with simple ultralight grips on the market today. Ergon GXR - hand ergonomics and lightweight proprietary AirCell Rubber compound 100% made in Germany! - Size Small: 32mm / 80 grams - Size Large: 34mm / 95 grams - Use: XC, Marathon, Bikepacking, Endurance - Grip material: proprietary AirCell Rubber - SGS Certified for purity and quality - Right and Left hand specific grips. - Completely new grip material for increased damping on your favorite trails. - Optimized form allows for reduced gripping force. - Grip zones are matched to the hand. - Replaceable end plug. - Carbon bar compatible. - No inner core. - No locking clamp.

- Streamlined, ergonomic combo grip - Dual-density Kraton rubber foundation - Strategically placed dual-density gel padding - Fully integrated, ergonomic mini-horn bar end - Easy-install, lock-on design - Secure, integrated double locking clamps - 140mm

- Ergonomic design conforms to riders hand without feeling bulky, provides padding where it is needed most - Half-Waffle pattern on the front of the grip provides extra control when you are off the back of the bike - NEW SINGLE CLAMP—Version 2.1 Lock-On System for more usable grips space and improved comfort on the outside of the grip - Variable knurl pattern alternates from smooth to sharp texture to provide more traction without irritating your hands. - Reinforced End molded out of soft, but durable material to prevent grip blowout.

SRAM's Locking Grips have clamps on both ends for a secure bar hold. Their rubber surface and "S" logo design offer a great feel.

Keep your bike looking good with SRAM's DoubleTap Lever Hoods matching your frame. They're made of a soft, grippy rubber and will enhance any bike's appearance. They fit RED 22, Force 22 and RED 10-speed ErgoDynamic shifters.

The Format is our first single clamp grip for those who like to make use of the full width of their bars, allowing you to run your hands right up to the edge. We had found some single clamp grips suffer from additional twisting, which is why we designed the sleeve to snugly fit the bars towards the ends. After examining wear patterns of grips that have been through the ringer, we implemented several different patterns and zones into the format to deal with the different dynamics going on in each part of your hand.

"Make a grip with the fussiest rider on the planet, you must be mad!!" The Bartender Pro is the next level in grip design for Burgtec. We've collaborated with 3x World Champion Greg Minnaar to hone the construction of this grip to produce unrivaled vibration dampening. - 31.5mm Diameter. - 30A Rubber Compound - Single Lock On