Grips

When you're going fast, you need to hold on to something. SRAM's DH Silicone Locking Grips have you covered with clamps on both ends for a secure bar hold. Their rubber surface with thumb donut and "S" logo design offer a great feel.

• Replacement locking handlebar grip sets for X0 and XX Grip Shift • Available in 100mm and short length 85mm shifter with interlocking Grip Shift interface and single bolt clamp. • Available in full-length 122mm grips with dual locking bolt clamps. • Available in black and silver.

Keep your bike looking good with SRAM's HydroR Lever Hoods. They're made of a soft, grippy rubber and are a great replacement hood for HydroR levers.

The 711 features perfect grip ergonomics for long-distance routes and use in racing XC style mtb. A well thought-out, highly ergonomic shape offers an especially secure grip and maximum comfort, while a full locking inner sleeve allows for infinite adjustment, allowing the rider to get that "just right" feel. The scope of delivery includes one set of grips. Strategic clamp placement increases the shock absorption and comfort on the outside of the hand. In addition, the outside surface area was increased using every trick in the book, making the new 711 Tech and Trail 2.0 as comfortable as a wing grip despite not being one. As round as necessary and as flat as possible: with the 711 grip, the outer contact surface is pressed flat, thus reducing the pressure peaks many times over. The grip security is supported by the Ergobar. This results in a flat, slightly angular grip bottom and offers a perfect form fit. This allows the grip to be guided loosely while still always keeping the bike under control. The advantages of the grip are particularly noticeable at the end of a tough marathon, but they also increase the fun on long tours or quick trips after work. Increased performance through perfect ergonomics. Various rubber compounds ensure a perfect grip level and high comfort. We only use the best possible materials. This guarantees you a long service life and no sticking of the grip rubber. The personal grip size is what matters. With the 711 grip, the sizes differ in diameter and shape.

- Dual Density Design - Integrated, 1pc Lock-On - Tapered Inner Core – prevents slippage - Mushrooms for ultimate comfort - Ergonomically ramped and undercut grabbers for superior grip - Ovalized design for ultimate comfort and control - Circular Iconic dampers - Flared outer ends

- Dual Density Design - Integrated, 1pc Lock-On - Tapered Inner Core – prevents slippage - Mushrooms for ultimate comfort - Ergonomically ramped and undercut grabbers for superior grip - Ovalized design for ultimate comfort and control - Circular Iconic dampers - Flared outer ends

- Made with DuPont Kevlar brand resin for softer, tackier and longer lasting grips - Used by top professional racers around the world

- 4 compounds: medium, soft, super comfort (extra-soft) or Kevlar version with suspended Kevlar particles for the ultimate tacky yet durable grip - Machined 6082 aluminum collars lock tightly with integrated grip core - 30mm outer diameter knurled grip

- Integrated grip body and locking collars for ultimate durability - 6082 T6 aluminum CNC machined collars - Diamond knurl pattern - Smooth profile end transition, for maximum comfort - Snap-fit end caps - Made in the UK

- Integrated grip body and locking collars for ultimate durability - 6082 T6 aluminum CNC machined collars - Diamond knurl pattern - Smooth profile end transition, for maximum comfort - Snap-fit end caps - Made in the UK

- CNC aluminum locking collars - Different levels of grips for different uses - Grip Length: 130mm - Handlebar Diameter: 22.2mm - Outer Diameter: 30.5mm

- Integrated grip body and locking collars for ultimate durability - 6082 T6 aluminum CNC machined collars - Diamond knurl pattern - Smooth profile end transition, for maximum comfort - Snap-fit end caps - Made in the UK

- Integrated grip body and locking collars for ultimate durability - 6082 T6 aluminum CNC machined collars - Diamond knurl pattern - Smooth profile end transition, for maximum comfort - Snap-fit end caps - Made in the UK

The Oury Original BMX Grip will provide you with performance and comfort. Flanged grips with rectangular design and Oury logo. Classic.

Oury single compound grips. Simple & classic. - Soft grips with raised blocks

Oury single compound grips. Simple & classic. - Soft grips with raised blocks

The classic Oury feel updated with lock-on from ODI. Bonus pack includes snap-caps and Lock Jaws. - Made by ODI - Snap-caps and Lock Jaws included

Oury single sided V2 lock-on grips.

The ultimate standard in grip comfort and beauty is now available in a single sided lock version. Anti-vibration, large pad design eliminates numbness and slipping for any size hand. The extremely soft rubber will give you excellent control and maximum comfort. Handsomely detailed design adds beauty to any bike. Made in the U.S.A. -Compatible with MTB, BMX, ATV, PWC -5 1/3" long measuring front clamp to end of grip (135 mm) -7/8" I.D. (22.25 mm) -1 1/3" O.D. (33 mm) -4.3 ounces (122 grams)

A low profile single lock on grip, designed to reduce arm pump and hand numbness. The Diamond knurled texture, with saw tooth finger ramps and a super tacky 20A compound provide ultimate traction. More traction means less death-gripping the bars and less arm pump. Our single lock has the profile of your favorite double lock-on. But to reduce hand numbness we've replaced the hard outer clamp with extra rubber for greater cushioning of your palm heel. Get all the benefits of an “ergonomic” grip without the city bike cruiser look! SPECS - Weight: 97g (Pair) - Length: 136mm - Diameter: 30mm

- Enough clamp bolts for 4 clamps

The classic Longneck ribbed grip pattern with an open end to accomodate end plugs now comes without a flange! - Classic mushroom style collapsible rib pattern - Constructed of our proprietary Soft Grip compound for added comfort - Increasingly popular with top athletes around the world - Open ends with black and white Two Color Push In Plugs end plugs included

The classic Longneck ribbed grip pattern with an open end to accomodate end plugs. - Classic mushroom style collapsible rib pattern - Constructed of our proprietary grip compound for comfort and durability - The grip of choice for top athletes around the globe - Open ends with Thug Plug end plugs included

"O" Grips for BMX offer an improved feel right out of the box and improved traction from the multi-directional rib pattern. - New softer durometer compound offers improved comfort right out of the box - Multi-directional rib pattern provides excellent shock absorption - Thicker O-shaped ribs offer improved control - Includes Push In Style end plugs

The Cult Vans grips feature a classic Vans waffle pattern and are made by ODI in the USA using their proprietary rubber compound. - Made in the USA by ODI - Length: 150mm

The classic flangeless Longneck ribbed grip pattern with an open end to accommodate end plugs now gets an extra 25mm of length! PRODUCT FEATURES: - Classic mushroom style collapsible rib pattern - Constructed of our proprietary grip SOFT compound for added comfort! - Increasingly popular with top athletes around the world - Open ends with Push In Plugs end plugs included - Sold In Pairs - 160mm

- Made from ODI proprietary soft compound material - Classic Ribbed design provides improved vibration dampening - 160mm Length - Push-in style end plug - Handlebar Diameter: 22.2mm

F-1 Series Float Grips are made from our exclusive A.I.R.E. compound which infuses air into the grip, reducing weight by over 30% and providing a slower rebound and response for improved comfort. - Medium diameter (31.5mm) - Reinforced inner layer for added durability - Micro-textured surface pattern improves tackiness and control - Smooth profile for a consistent feel

F-1 Series Vapor Grips are made from our exclusive A.I.R.E compound which infuses air into the grip, reducing weight by over 30% and providing a slower rebound and response for improved comfort. - Medium diameter (31.5mm) - Reinforced inner layer for added durability - Added surface pattern provides improved grip in all conditions - Ergonomic finger cutouts for a better gripping surface and improved control

- Ergonomic design conforms to riders hand without feeling bulky, provides padding where it is needed most - Half-Waffle pattern on the front of the grip provides extra control when you are off the back of the bike - NEW SINGLE CLAMP—Version 2.1 Lock-On System for more usable grips space and improved comfort on the outside of the grip - Variable knurl pattern alternates from smooth to sharp texture to provide more traction without irritating your hands. - Reinforced End molded out of soft, but durable material to prevent grip blowout.

ODI Bjorn lock-on V2.1 grips. Made from recycled post-industrial rubber from ODI's manufacturing, the Bjorn grips have an offset center to provide additional cushion without extra bulk. - Made from recycled TPE rubber - Single-sided lock on

- Ergonomic design conforms to riders hand without feeling bulky, provides padding where it is needed most - Half-Waffle pattern on the front of the grip provides extra control when you are off the back of the bike - NEW SINGLE CLAMP—Version 2.1 Lock-On System for more usable grips space and improved comfort on the outside of the grip - Variable knurl pattern alternates from smooth to sharp texture to provide more traction without irritating your hands. - Reinforced End molded out of soft, but durable material to prevent grip blowout.

When two companies known for creating comfortable products collaborate, you know the results are going to be good. THE SDG GRIP FEATURES: - A Unique circular ribbed dampener which spread pressure across your palm while still providing excellent control - The front side of the grip features ergonomically ramped logos that act like hooks for your fingers and provide excellent traction when hanging off the rear of the bike - Lock-On Grip System = 100% Slip Free performance - Includes Snap Cap End Plugs - Color match to your SDG Duster seat

ODI’s first generation Lock-On System are standard for downhill racers everywhere. Designed in a partnership with 2-time UCI World Cup Downhill Champion Aaron Gwin, ODI has redefined grip performance again. The new AG-1 grips are engineered from end to end to deliver every feature racers demand. PRODUCT FEATURES: ALUMINUM REINFORCED ENDS - Provide extra durability against grip blowout ANGLED RIB PATTERN - Slightly harder compound designed to match articulation points of your hands for added control NEW SINGLE CLAMP - Version 2.1 Lock-On System HARD PLASTIC END - Molded over the aluminum endcap, the end provides durability but will not gouge. NEW MULTI-LAYER GRIP PATTERN - Soft compound with dual knurl pattern for improved control in all conditions ERGONOMIC DESIGN - Provides more comfort for those who ride in the inside or outside of the grip 135MM Overall Length

- Designed with help from Tinker Juarez - Large diameter grip at 34.5mm - Offset grip design provides more padding on the palm side of the grip - Soft TPE end offer improved comfort and grip protection - Made from ODI exclusive A.I.R.E compound for reduced weight and improved vibration dampening - Contoured surface for improved comfort on longer rides - Ergonomic finger cutouts provide improved grip in all condition - Version 2.1 Lock-On system ensure 100% slip-free performance

Our initial partnership with Aaron Gwin produced numerous innovations that pushed grip technology to new levels. With the new AG2 Grips, we wanted to take things even further. We started with an ultra-soft pro compound and built it into an improved knurl pattern that provides extra tackiness and control along with reduced vibration transfer. We coupled this with our exclusive offset design that offers even more impact dampening where it is needed most, without increasing the grip diameter. We then redesigned the most impact-prone portions of the grips to provide an even better feel and accurate control when riding. - Grips feature a larger diameter than the original grips (30.5mm) with offset padding towards the rider for improved comfort - Soft Pro compound provides excellent shock absorption - Redesigned surface pattern for improved traction and vibration dampening - Redesigned ends provide an improved feel - Provide extra durability against grip blowout - Thin ribs add control without a bulky feel - Uses our race-proven Version 2.1 Lock-On system - Molded over the aluminum endcap, the end provides durability but will not gouge

- Developed in collaboration with 2x World Cup Champion Aaron Gwin - Ergonomic single clamp design with aluminum reinforced ends - Angled rib pattern matches the articulation points of your hand - Bonus pack includes Lock-On grips and v2.1 clamp

- Aluminum clamps secure the grip on both ends using a hex wrench - Loosen pinch bolts and grips slide on or off with ease - 130mm length for standard shift/brake setup (not for twist shifters, use 90mm replacement grip options for twist shifters)

- Grooved channels prevent mud and water buildup - Overmolded flap gives added protection on outside clamp - Unique undercut pads provide slim comfortable feel with maximum grip - Custom flanged design provides hand support with more usable grip surface

Two Southern California originals have teamed up to create a modern-day classic design. Featuring the classic Vans waffle sole pattern and constructed from ODI's proprietary grip compounds for a consistent feel that provides exceptional control in all conditions. Available as part of the patented Lock-On Grip System for guaranteed slip-free performance and simple installation. For MTB, BMX, ATV, and PWC applications. - Iconic Vans Waffle sole pattern utilizing ODI's proprietary grip compounds - Provides exceptional feel and control in all conditions - Aluminum clamps secure the grip on both ends using a hex wrench

The Mission Tactile grips are a super comfortable flangeless grip, with a generous 160mm length. The spiral rib pattern feels soft while still providing tons of grip and just the right amount of support. Ultra-durable expanding wedge style barends come included, and are a much-welcomed upgrade over plug style barends. - Diameter: 30mm

Lizard Skins' Moab Grips are an awesome upgrade for your bike. Easy to install, these single-compound grips offer a comfortable texture that lets you easily hold on for great control.

The Charger Evo is the most complex grip we’ve ever created. Dual-patterned textures on each grip allow riders to absorb shock and feel handlebar support with every move. The single-compound grip makes application and removal easy in a grip that athletes can count on. Single Compound Grips include push in plugs. - Length: 140mm - Weight (with plugs): 108 grams - Diameter: Medium (31mm)

The North Shore mountains of British Columbia are home to some of the most amazing trails in the world. We are not only excited to announce the redesigned Northshore grip but also our new partnership with the North Shore Mountain Biking Association. A percentage of the proceeds from the sales of these grips are used to support the NSMBA and the trail building on the North Shore. The new Northshore grip is our thickest single compound grip and features a series of textured shock absorbing sections to provide a comfortable and controlled ride. - Length: 130 mm - Weight (with plugs): 112 grams - Diameter: 33.25 mm

- 32.3Mm thick durasoft polymer (Dsp) - Micro-Chevron grip pattern for superior comfort, Feel and control - Ultra lightweight at 30 grams per set - Includes plugs and double sided tape

The MacAskill grip features a larger diameter in key areas of the grip to provide better cushioning for impacts and vibration dampening. - Designed and ridden by Danny MacAskill - Single-sided lock-on grip - 29–30mm diameter

The Charger Evo is the most complex grip we’ve ever created. Dual patterned textures on each grip allow riders to absorb shock and feel handlebar support with every move. Lock-on ring design ensures the grip will stay in place for long lasting use. Lock-On Grips include the grips, clamps, screws, and plugs. - Length: 136mm - Weight (with plugs): 90 grams - Diameter: Medium (31mm)

Utah's Delicate Arch printed pattern pays homage to the state's mountain biking trails while providing excellent traction. Lock-On Grips include the grips, clamps, screws and plugs. - Length: 130 mm - Weight (with plugs): 114 grams - Diameter: Small (30.5 mm)

The North Shore mountains of British Columbia are home to some of the most amazing trails in the world. We are not only excited to announce the redesigned Northshore grip but also our new partnership with the North Shore Mountain Biking Association. A percentage of the proceeds from the sales of these grips are used to support the NSMBA and the trail building on the North Shore. The new Northshore grip is our thickest lock-on grip and features a series of textured shock absorbing sections to provide a comfortable and controlled ride. - Length: 130 mm - Weight (with plugs): 125 grams - Diameter: 33 mm

Ride like a pro with the Steve Peat inspired Signature lock-on grips. Lock-on grips are designed to easily slide onto the handlebar and clamp with the rings to ensure it is secure and won’t slip during the most intense rides. Providing a sturdy ride, the patented lock-on design eliminates unwanted movement to maximize the rider’s control and comfort. Lizard Skins lock-on grips include the grips, clamps, screws, and plugs. - Length: 130 mm - Weight (with plugs): 112 grams - Diameter: 30.5 mm

The classic upper pattern with a waffle finger hold for a better grip. - Compatible with MTB, BMX, ATV, PWC - Weight: 101 grams - Length: 135mm - Diameter: Medium (31mm)

- Medium Diameter (32.25mm) - Length 135mm - 118g - Handlebar Diameter: 22.2mm

The flangeless Kink Ace grips feature a super comfortable wrapped style pattern, that may look a bit familiar to a lot of riders. The combination of both thick and thin ribs creates a mixture of comfort, grip, and support. Soft Kraton rubber material and a mid-sized 29mm diameter give these grips a perfect traditional feeling. Flush plug style barends are included with the grips, fully protecting them from rips and tears. - Material: Soft Kraton Rubber - Length: 150mm - Diameter: 29mm

The Kink Samurai grips, as the name suggests, were inspired by the amazing craftsmanship used in Japanese Samurai swords. Beautiful design, quality craftsmanship, and the best materials. With this all in mind, the Samurai grips are manufactured by ODI in the USA using ODI's propriety rubber compound. The grip pattern itself has also been inspired by Samurai sword handles, creating a superior gripping surface. A perfectly paired set of plug style bar ends are also included. TECH SPECS - Material: Proprietary ODI Rubber - Length: 150mm - Diameter: 29mm - Bar Ends: Includes Kink Samurai Bar Ends

- Smaller diameter, kid-friendly sizing - Soft, comfortable rubber - Oversized, integrated impact-resistant plugs - 97mm

- Slip-on for tool-free installation - Lightweight, closed-cell foam construction - Ergonomic profile with bar plugs - Matching end plugs included - 125mm

- BMX-style grip with medium flange - Slip-on design for tool-free installation - Classic, collapsible rib construction for excellent grip - Soft Kraton rubber construction for comfort and durability - Matching end plugs included - 130mm

- Slip-on design for tool-free installation - Classic, collapsible rib construction for excellent grip - Soft Kraton rubber construction for comfort and durability - Matching end plugs included - 130mm

- Soft Kraton rubber construction - Anti-vibration large pad design - Comfortable and non-slip

- Easy-install, slip-on design - Soft Kraton rubber construction - Ergonomic palm rest for enhanced comfort - Integrated end plugs - 135mm