Chainrings

Shimano chainrings offer durability and confidence-inspiring performance, and go a long way towards getting a drivetrain back to optimum working condition.

Original equipment on SRAM and Truvativ cranks, they also work well with other drivetrains. - Short Chain Retention Pin, Use With 36 Tooth Inner Ring - 7000 series aluminum provides strength and durability

Original equipment on SRAM and Truvativ cranks, they also work well with other drive trains. - 7000 series aluminum provides strength and durability

SRAM's road chainrings are stamped from 7075 aluminum for low weight and excellent strength. Shifting pins and ramped teeth deliver precision shifting, too.

64BCD chainring for MTB cranksets

Original equipment on SRAM and Truvativ cranks, they also work well with other drive trains. - Supplied in TruVativ packaging - Bolt holes are threaded

SRAM's road chainrings are stamped from 7075 aluminum for low weight and excellent strength. The teeth are ramped for precision shifting, too.

SRAM's road chainrings are stamped from 7075 aluminum for low weight and excellent strength. The teeth are ramped for precision shifting, too.

The X-SYNC 2 Bosch Direct Mount Chainring is built with the needs of E-MTB riders in mind, and incorporates the same X-SYNC 2 Eagle chain management technology found in every SRAM 1x drivetrain. - Sharp, narrow tooth profile and rounded chamfer edges help manage a deflected chain - Mud-clearing recesses - An integral component of the SRAM 1x drivetrain - Speeds: 12 - Material: Steel

The radical new look and feel of SRAM's X-SYNC 2 Eagle chainring is a direct result of SRAM drivetrain engineers studying the performance and wear characteristics of thousands of X-SYNC chainrings. The longer, positive-rake tooth shape has been designed to work perfectly with the Eagle chain to increase chain retention and overall pedaling efficiency, while decreasing friction, noise and wear. - Can be used with Eagle 12 speed or SRAM 11 speed chains - Direct mount rings with 3mm offset fit Boost geometry Eagle cranks; direct mount rings with 6mm offset fit traditional geometry - Eagle cranks and GXP spindle XX1, X01, X0, X1 and X9 cranks

The radical look and feel of SRAM's X-SYNC 2 Eagle chainring is a direct result of SRAM drivetrain engineers studying the performance and wear characteristics of thousands of X-SYNC chainrings. They subjected every size of chainring to untold environmental and mechanical tortures, abuse and neglect, in both lab and real-world settings, to come up with a chainring that would augment the Eagle drivetrain’s performance in all conditions. The longer, positive-rake tooth shape has been designed to work perfectly with the Eagle chain to increase chain retention and overall pedaling efficiency, while decreasing friction, noise and wear.

Make SRAM 1x even better with the simplicity of the SRAM X-SYNC Direct Mount chainring. Engineered in Germany, the new Direct Mount rings brings lighter weight and greater simplicity to XX1, X01, X1-1400, and GX-1400 cranksets. SRAM’s Direct Mount rings give riders the perfect opportunity for a serious upgrade. - Fully CNC AL rings - X-SYNC technology - Lighter weight than spider version (~25-50g depending on size) - Offset: 0mm (BB30), 6mm (GXP)

Replace worn-out chainrings or change out gearing with SRAM's Yaw Compatible Inner Chainring. This solid ring is crafted from aluminum using SRAM's X-Glide tooth profiles for quick, responsive shifting. This chainring works for SRAM's Yaw front derailleurs on both 10- and 11-speed drivetrains. The 42-tooth version works best when paired with a 55- or 54-tooth big ring.

110BCD & 130BCD Cold Forged road chainring sets are the result of relentless testing matched with the best materials and manufacturing processes to create some of the most durable and sweetest shifting sets available. - Simple, economic replacement set - Cold forged 7075 T6 aluminum and hard anodized for durability - LevaTime: Praxis unique timing and shifting technology - Not compatible with Campagnolo/Fulcrum Ultra-Torque/Racing Torque cranksets - Unauthorized online sales prohibited by manufacturer *32/48t rings: This is a custom ring set that can only be installed on the new Praxis Works branded 110BCD road cranks and on some Specialized alloy 110BCD spider. This specific set includes custom bolts required for installation. This set will not install on prior generation “TURN” road cranks or other brand cranks.

110BCD & 130BCD Cold Forged road chainring sets are the result of relentless testing matched with the best materials and manufacturing processes to create some of the most durable and sweetest shifting sets available. - Designed for 5-arm standard, mid-compact, compact, and Cyclocross setups - One-Shot Cold Forging: The exclusive manufacturing process creates a more complex tooth profile and provides more shifting features on a chainring which normal CNC manufacturing won't allow. Individual tooth profiles, alternating tooth angles, timed ramps, and tactically placed shift pins are all jam-packed onto a Praxis ring. The process creates a harder and tougher tooth overall durability - LevaTime: Praxis unique timing and shifting technology. Several shift pins are placed strategically at points on the ring to provide a perfectly timed lift. Synchronized ramps are tuned with a specific inner ring, providing a clean channel for the chain to move - Not compatible with Campagnolo/Fulcrum Ultra-Torque/Racing Torque cranksets - Unauthorized online sales are prohibited by manufacturer * 32/48t rings: This is a custom ring set that can only be installed on the new Praxis Works branded 110BCD road cranks, and also the new Specialized alloy 110BCD spider. This specific set includes custom bolts required for installation. This set will not install on prior generation “TURN” road cranks or other brand cranks.

Designed with analysis of drivetrain friction, the Wave™ tooth actively engages the chain but generates much less wear than competing designs — spreading the load over large surface areas instead. How it Works: The Wave™ tooth pattern swings right to left alternating lateral force to each chain link to actively retain the chain. This design creates more open areas for mud and debris evacuation and preserves chain retention in adverse conditions. (Chain Icon printed on the ring to help guide installations) All Purpose: Tough enough for Enduro, Downhill, and weight-conscious XC and Cyclocross riding. These Wave™ Tech rings are machined from 7075-T6 aluminum and Hard Anodized to take a beating. Our Wave Tech tooth profile has also been tweaked over the years as different chains hit the market. Right now the Wave Tech is compatible with 10sp, 11sp, and now even 12sp chains from Shimano, SRAM, and KMC.

The 1x 64/104 BCD variable tooth chainrings are compatible with all 9, 10, 11, SRAM and Shimano drivetrains, and 12-speed SRAM drivetrains. Specifications: - 104mm Bolt Diameter Circle (104 BCD) - Bottom Bracket Types: BB30 / GXP / Boost - Chainline: This varies with your crankset - 28T: Fits any standard 64/104BCD cranks. The 28T chainring uses 64mm BCD to mount onto the crank arm and is offset 5mm to a 49mm chain line. - 30T: ~50mm on a 2×10 mid-ring mounting position - 32T, 34T, 36T, 38T: ~52mm on a 2×10 mid-ring mounting position - Machined from solid 7075 T6 Aluminum - Anodized black with laser-etched graphics - Precision CNC machined in Whistler, BC. Weight: 28T – 45g 30T – 45g 32T – 40g 34T – 45g 36T – 55g 38T – 65g

FSA Pro Road Chainrings deliver flawless shifting for any road drivetrain. - Precision CNC machined AL7075/T6 alloy

FSA's Pro Road chainrings are made from CNC-machined 7000-series aluminum for low weight. The teeth are ramped and pinned for excellent shifting, too.

FSA Pro Road Chainrings deliver flawless shifting for any road drivetrain. - Precision CNC machined AL7075/T6 alloy

FSA Pro Road Chainrings deliver flawless shifting for any road drivetrain. - Precision CNC machined AL7075/T6 alloy

FSA Super Road Chainrings are designed to provide flawless shifting, with minimal weight and unmatched durability. - Precision CNC machined AL7075/T6 alloy

FSA Pro Track Chainrings are CNC Machined AL7075/T6 with laser-etched logos. - Requires 1/2" x 1/8" chain

The Sequence chainring uses the official X-SYNC technology licensed from SRAM for unmatched chain retention. Chromag is the only MTB company officially authorized to produce chainrings with the X-SYNC technology. So now, no matter what kind of mountain bike you have, you can have the peace of mind that your chain will stay put, and you can give your bike a little extra flair with the timeless Chromag styling. SPECS - Official SRAM X-SYNC technology. Complies with SRAM warranty standards for compatibility with all SRAM X-SYNC drivetrain. - Chamfered mud-clearing recesses at the base of the teeth provide the best possible performance in muddy conditions. - CNC Machined from 7075T6 aluminum for the best durability. - Available for 104/94 BCD crank spider patterns and Direct Mount options. - 7075-T6 aluminum - Anodized Black with laser etch - CNC machined in Whistler, BC. Sequence rings are available in: - 30/32/34/36 tooth (104 BCD) - 28/30 tooth (94 BCD) - 28/30/32 tooth (Direct Mount RFC) - 28/30/32 tooth (Direct Mount GXP) - 28/30 tooth (Direct Mount BB30) - 28/30/32 tooth (Direct Mount Boost) Compatibility Notes: - 104 BCD is the most popular crank arm spacing design (refer to manufacturers specifications to check for compatibility). - Direct mount rings work with SRAM S1400, S2200, S2210, X9 XO and XX1 crank arms. - Direct Mount Sequence rings are available for with GXP and BB30 bottom brackets as well as Race Face Cinch cranks.

Our oval chainring features our highly sought-after tooth profile for the best 1x drivetrain performance. Combine this chainring with a modern-day clutch derailleur and never worry about dropping a chain again. - Oval shape allows for greater power, increased traction, and a smoother spin - Blackspire's oval shape has an ovality of 12-13% with a timing of 115 degrees after the top dead center - Highly sought-after narrow-wide tooth design provides excellent chain retention without a chain guide - Perfect for 1x setups and compatible with 9/10/11, and 12-speed systems, 9-speed drivetrains require a 10-speed chain - 30 tooth features built-in tabs for a 49.5mm chain line and is threaded for ideal fitment - CNC'd in Canada from 7075 aluminum with laser-etched graphics

- Wide tooth profiling prevents chain drop without a chainguide - Compatible with 9/10/11 speed chains, allowing a 1x setup on most drivetrains - Constructed in Canada from 7075 aluminum

Proven cross-compatibility applied to an ultra-lightweight, durable AL-7075-T6 chainring. Highly CNC'd technical finish. Available to match Helix cassette colors, SRAM™ compatible 3-bolt design. A technology first. Combine with the chain, derailleur/shifter of choice without a change in chain retention quality. Build a dream rig with more freedom and spec creatively. Available in bold colors to match the popular e*thirteen Helix R Cassettes, Plus 35 Stems, and Quick Fill Plasma Valves. - Save weight, keep your drivetrain options open, and use the chain you want - 3-Bolt Direct Mount design for use with SRAM™ 3-bolt direct mount compatible cranks - Cut from billet AL-7075 for the highest strength and wear resistance - SRAM™ and Shimano™ 11 and 12 Speed Chain Compatible - Extensive CNC machining for lightweight and looks that kill - Available in 5 bold Ano colors and 4 sizes 28/30/32/34t - Match and personalize the way you want? - E*thirteen QuickConnect Direct Mount rings include 1mm spacers which allows them to be run on legacy cranks (TRS/LG1/XCX) as well as Helix and Helix R cranks - 3-bolt direct mount chainrings fit SRAM and other similar interface cranks - Tooth profile

Customize your ride with The Helix Race Direct Mount Chainring. Made from ultra-lightweight and durable AL-7075-T6, this chainring offers compatibility with SRAM™/Shimano™ chains and features a flip-flop design for chain line adjustment. With bold color options that match e*thirteen's popular components, it's the perfect addition to your dream rig, ensuring maximum strength and longevity. - E*thirteen QuickConnect Direct Mount rings include 1mm spacers, which allows them to be run on legacy cranks (TRS/LG1/XCX), as well as Helix and Helix R cranks - 3-bolt direct mount chainrings fit SRAM and other similar interface cranks - Tooth profile is compatible with both Shimano and SRAM chains in both 11 and 12-speed - Can be flipped to provide either a 52 or 55mm chainline

This is a 96mm BCD chainring for a 1X chainring for XTR M9000 crankset with the proven chain retention of our Drop-Stop® chainring. They fit only the Shimano XTR M9000 and M9020 cranksets (race and trail respectively). They have an asymmetrical 96 mm BCD with built-in threaded standoffs to provide the ideal 1X chainline. - Fits 96 BCD XTR M9000 and M9020 cranksets - Drop-Stop technology. On Wolf Tooth's patented wide/narrow chainring, the wide side of the tooth has maximum contact on the drive side which spreads the load and improves chainring life. The narrow side allows clearance for mud and debris which reduces friction. - Alternating wide/narrow tooth pattern prevents chain derailment Compatibility: - These rings fit on the Shimano XTR M9000 and M9020 1x or 2x cranksets - Use only the stock Shimano XTR chainring bolts (M7x.75) - You will not use the stock bolt caps when mounting this ring. The stock bolts will thread into the chainring's standoffs from the outside of the crankset - For 1x9, 1x10, 1x11 and 1x12 drivetrains (including SRAM Eagle) If using a 9-speed drivetrain use a 10-speed chain (shifts and works well on a 9-speed drivetrain and fits the ring tighter for better chain retention) - Chainline - 49 mm for 30-34T and 50 mm for 36T. Provides a great chainline on most boost bikes - Available in multiple tooth profiles for optimal performance based on your chain type. Use Drop-Stop ST for use with Shimano 12-speed Hyperglide+ and 12spd KMC chains. Use Drop-Stop A for all 9, 10, and 11spd chains or 12spd SRAM Eagle, KMC, Connex or Wippermann chains. Drop-Stop B is optimized for SRAM 12 spd Transmission (T-type) and Road Flattop chains but is compatible with all chains that work with Drop-Stop A. DROP-STOP A - Wolf Tooth Drop-Stop A is the original patented wide/narrow chainring compatible with multiple drivetrain brands including 9, 10, 11, and 12spd SRAM Eagle, KMC, Wippermann, etc. - NOT compatible with 12spd SRAM Transmission (T-Type) Flattop, 12spd Shimano HG+, or 12spd Campy DROP-STOP ST - Compatible with 12spd Shimano Hyperglide+ chain and 12spd KMC chain only - Symmetric Trapezoidal (ST) tooth shape is optimized for Shimano HG+ chain Recommendations - If you plan to ride in very muddy conditions, we recommend a chainguide or chainkeeper in addition to a clutch-type rear derailleur. Without these precautions, you may experience chaindrops and/or chainsuck. Tech Specs: - Weight: 30/41g | 32t/50g | 34t/59g | 36t/69g - Material: 7075-T6 aluminum - Made in the USA

The Wolf Tooth 107 BCD Chainring for SRAM Cranks is compatible with most new SRAM 1x road cranks that use the 107 BCD spider, including the SRAM AXS Power Meter Spider. This chainring uses the patented Wolf Tooth Drop-Stop B Wide/Narrow tooth profile that is optimized for drop bar bikes. - Fits 107 BCD for SRAM Cranks - Drop-Stop technology prevents dropped chains. On Wolf Tooth's patented wide/narrow chainring, the wide side of the tooth has maximum contact on the drive side which spreads the load and improves chainring life. The narrow side allows clearance for mud and debris while reducing friction. - Cranks that use the 107 BCD spider also use the SRAM 8-bolt interface, which is compatible with Wolf Tooth Direct Mount Chainrings for SRAM 8-Bolt More power, better traction, less shifting. Wolf Tooth oval chainrings use our proprietary PowerTrac design that has all the benefits of oval, but without the funky, uneven pedal stroke. Ride one once and you'll wonder why you waited so long to try oval. Think of an oval chainring as two chainrings in one. A major benefit of oval is how the shape of the chainring alters your gearing in two important phases of your pedal stroke by harnessing your body's natural biomechanics. Here's how it works. The area of the chainring with the larger diameter engages with the chain at the optimal point on the downstroke, which is what's known as the Power Zone. If you were to look at a clock, the Power Zone would be between 1-5 and 7-11. Conversely, the Recovery Zone – back to the clock face, between 11-1 and 5-7 – is the weakest part of the pedal stroke, when the oval maximizes your efficiency. A 34T oval chainring behaves like a 36T chainring when you want power, while behaving like a 32T chainring when you're climbing. We've also engineered our oval chainrings to provide smoother, more efficient pedal rotation. This equates to better traction because of steadier torque on the rear wheel. With a Wolf Tooth oval chainring, you can harness more of your strength in the Power Zone, while having easier pedaling in the Recovery Zone. - Use Drop-Stop B for all SRAM Eagle, SRAM Road and Transmission (T-Type) Flattop chains, 9, 10, and 11spd chains or 12spd KMC, Connex, Wippermann, Campagnolo. DROP-STOP B - Compatible 9, 10, 11, and 12s SRAM Eagle, 12s SRAM Transmission (T-type) Flattop, 12s Campy, 12s KMC - Not compatible with 12s Shimano HG+ chains Recommendations - - If you plan to ride in very muddy conditions, we recommend a chainguide or chainkeeper (like our GnarWolf) in addition to a clutch-type rear derailleur. Without these precautions, you may experience chaindrops and/or chainsuck. - Recommend the use of a clutch-style rear derailleur for the best chain security. Tech Specs: - Material: 7075-T6 aluminum - Weight: 38t/75g | 40t/78g | 42t/86g - Made in the USA

Direct mount chainrings for SRAM cranks with 8-bolt mounting replace your existing spider and chainring with one clean-looking, lightweight, and stiff piece of machined billet. More power, better traction, less shifting. Wolf Tooth oval chainrings use our proprietary PowerTrac design that has all the benefits of oval, but without the funky, uneven pedal stroke. Ride one once and you'll wonder why you waited so long to try oval. Think of an oval chainring as two chainrings in one. A major benefit of oval is how the shape of the chainring alters your gearing in two important phases of your pedal stroke by harnessing your body's natural biomechanics. Here's how it works. The area of the chainring with the larger diameter engages with the chain at the optimal point on the downstroke, which is what's known as the Power Zone. If you were to look at a clock, the Power Zone would be between 1-5 and 7-11. Conversely, the Recovery Zone – back to the clock face, between 11-1 and 5-7 – is the weakest part of the pedal stroke, when the oval maximizes your efficiency. A 34T oval chainring behaves like a 36T chainring when you want power while behaving like a 32T chainring when you're climbing. We've also engineered our oval chainrings to provide smoother, more efficient pedal rotation. This equates to better traction because of steadier torque on the rear wheel. With a Wolf Tooth oval chainring, you can harness more of your strength in the Power Zone, while having easier pedaling in the Recovery Zone. Compatibility: - These direct mount chainrings will replace your existing chainring and spider or replace the direct mount chainring for SRAM AXS cranksets and other cranks that use the 8-bolt mounting. Most SRAM cranksets have traditionally used a 3-bolt mounting, but the 8-bolt mounting has always been used on the Quarq power meter cranks. Now some non-power meter cranks like SRAM AXS use the 8-bolt mounting. - All SRAM Direct Mount DUB road cranksets use the 8-bolt mounting standard. These cranksets use either 107 BCD or 94 BCD; any of those cranksets with a removable spider use the 8-bolt mount. - Wolf Tooth's patented Drop-Stop® wide/narrow tooth profile for the ultimate chain retention and mud-shedding ability - 6mm offset - Chainline 45mm - Use Drop-Stop B for all SRAM Eagle, SRAM Road and Transmission (T-Type) Flattop chains, 9, 10, and 11spd chains or 12spd KMC, Connex, Wippermann, Campagnolo. DROP-STOP B - Compatible 9, 10, 11, and 12s SRAM Eagle, 12s SRAM Transmission (T-type) Flattop, 12s Campy, 12s KMC - Not compatible with 12s Shimano HG+ chains Recommendations - - Recommend the use of a clutch-style rear derailleur for the best chain security - Use the included custom T20 bolts. Torque 4Nm with T20 tool Tech Specs: - Weight: 38T/81g | 40T/87g | 42T/97g | 44T/117g - Material: 7075-T6 aluminum - Made in the USA

A sturdy 4-spoke design and a solid 6mm thick 6061-T6 alloy construction make the 4 Star Sprocket a real killer. - Material: Full CNC 6061-T6 alloy - Thickness: 6.35mm - Special Features: Bolt drive version only, made to fit directly on to a 24mm crank spindle, includes adaptors for 19mm and 22mm spindles - Weight: 25t: 77g (2.71oz : 0.16lbs)

The logic was designed with our team riders who needed a simple, good looking but strong and dent-resistant sprocket for all kinds of riding. Available in 25T and 28T with adaptors to fit any crank on the market, many of the team can be found riding the logic sprocket this season. MATERIAL: - Full CNC 6061-T6 alloy THICKNESS: - 6.35mm SIZES: - 25T, 28T SPECIAL FEATURES: - Team designed sprocket - Adaptors to fit 19/22/24mm cranks - Thicker spokes for increased strength

The Pathfinder sprocket is 8mm thick and uses a unique 9-sided design that allowed WTP to integrate the sprocket mounting location into the spoke pattern, resulting in a super-clean looking sprocket with plenty of strength and longevity even for the most savage rider out there. - Full CNC 6061-T6 alloy - 9 rotation points for longer life - Sunken adapters for perfect chain line - Made to fit directly on to a 24mm crank spindle, includes adaptors for 19mm and 22mm spindles

Felix Prangenberg signature super-tough 8mm-thick street sprocket/bash guard combo with 9 sprocket bolt holes integrated into the design for extra long life. MATERIAL: - Full CNC 6061-T6 alloy THICKNESS: - 8mm SIZES: - 25T, 28T SPECIAL FEATURES: - Bolt-on bash guard made exclusively for the Wethepeople Pathfinder sprocket - Securely attached using x4 hollow crmo sprocket bolts - 9 rotation points for longer sprocket life - Available as an upgrade for your current Pathfinder sprocket, or as a combo pack

The Patrol sprocket is based on the classic racing sprockets of the past. This one uses a high-quality full CNC construction and offset teeth for a perfect chain line. This thing was designed so you could crank it fast, so bolt one onto your bike and see just how fast you go. - Full CNC 6061-T6 alloy - Thickness: 6.35mm - Bolt drive version only - Made to fit directly on to a 24mm crank spindle, includes adaptors for 19mm and 22mm spindles

Original equipment on SRAM and Truvativ cranks, they also work well with other drivetrains. - Material: Aluminum

- DualHex kits: 5mm-broach bolts with 6mm-broach nuts for secure 2-wrench assembly - Triple kit can be used on 5-arm or 4-arm mountain/road cranks (includes 5 inner chainring bolts in addition to middle/outer bolt/nut set)

Original equipment on SRAM and Truvativ cranks, these chainrings also work well with other drivetrains. - 104mm BCD - Material: Aluminum

- Shimano, 32T, 9 sp, BCD 104mm, 4-Bolt, FC-M430-9, Middle Chainring, For MTB triple, Steel, Silver, Y1M098060

- Shimano, 22T, 9 sp, BCD 64mm, 4-Bolt, Deore FC-M590, Inner Chainring, For 22/32/44, Steel, Black, Y1LD22000

Shimano Dura-Ace 9000 11-Speed Chainrings. - Chainring BCD: 110 Shimano Asymmetric - Color: Black - Defined Color: Black - Drivetrain Speeds: 11 - Material: Aluminum - Ring Position/Type: Inner

The Shimano R9100 series crankset achieves the ultimate in optimal power transfer. It does this through a reinforced chainring on its unique asymmetrical four-arm spider construction. - Chainring BCD: 110 Shimano Asymmetric - Drivetrain Speeds: 11 - Material: Aluminum - Ring Position/Type: Inner

The Shimano R9100 series crankset achieves the ultimate in optimal power transfer. It does this through a more reinforced outer chainring on its unique asymmetrical four-arm spider construction. - Chainring BCD: 110 Shimano Asymmetric - Drivetrain Speeds: 11 - Material: Aluminum - Ring Position/Type: Outer

- Shimano, GRX FC-RX600 2x10 / 2x11, Chainring, Teeth: 46, Speed: 10, BCD: 110, Bolts: 4, Outer, Aluminum, Black

- Shimano, GRX FC-RX810 1x11, Chainring, Teeth: 40, Speed: 11, BCD: 110, Bolts: 4, Single, Aluminum, Black

- Shimano, GRX FC-RX810 2x11, Chainring, Teeth: 31, Speed: 11, BCD: 80, Bolts: 4, Inner, Aluminum, Black - Shimano, GRX FC-RX810 2x11, Chainring, Teeth: 48, Speed: 11, BCD: 110, Bolts: 4, Outer, Aluminum, Black

- Chainrings for SLX FC-M675 double cranks - Please refer to compatibility: 38T chainrings are available for 24T or 26T inner chainring and are not cross-compatible.

SLX SM-CRM75 stiff and lightweight chainring delivers smooth pedaling over bumpy terrain. The SM-CRM75 chainring features SHIMANO DYNAMIC CHAIN ENGAGEMENT+ technology, which features special gear teeth profiles that deliver exceptional chain engagement and chain retention. - Special MTB gear teeth profile improves chain engagement and retention - Exchangeable single/double chainring - Crankset can be used as common component - Superior chain retention - Rider tunable

Shimano Sora 9-Speed replacement chainrings gets your drivetrain operating smoothly again.

Shimano chainrings offer durability and confidence-inspiring performance, and go a long way towards getting a drivetrain back to optimum working condition.

- Better chain engagement for greater chain retention - Special gear teeth profile designed for MTB riding usage - Smoother driving even over bumpy terrain - For XTR FC-M9100-1, M9120-1 cranks

Engingeered to interface with Bosch motor systems, SRAM drivetrain engineers optimized this ring to combat the high-torque, high-wear situations e-bike riders face. The aggressive T-Type tooth design provides better chain retention for a smoother, more efficient pedal feel with a focus on long wear-life. - Steel (36T,38T). - AeroGuard Compatible that fufills EN 15194:2017 standard - Backwards compatible with other Eagle Technology.

Intense study of chain and chainring wear patterns led to the radical tooth profile that lasts longer, runs quieter and further improves chain retention. Oval ring shape for riders that want to adjust the power profile of their pedal stroke. - The only oval rings with X-Sync 2 tooth design - Direct Mount Type: Direct Mount SRAM - Drivetrain Speeds: 10, 11, 12 - Material: Aluminum - Ring Position/Type: Chain Retaining Single Ring - Round or Oval: Oval - Chainline/Hub Compatibility: 141/148 Boost Hubs

It’s undeniable that some riders’ pedaling styles benefit from oval chainrings, so SRAM has engineered the new X-SYNC 2 Oval chainrings to give them the advantage they want. They are the only oval option available with SRAM's genuine X-SYNC 2 teeth profile, so they are the only oval chainrings on the market that are 100-percent optimized for Eagle. - Direct Mount Type: Direct Mount SRAM - Drivetrain Speeds: 10, 11, 12 - Material: Aluminum - Ring Position/Type: Chain Retaining Single Ring - Chainline/Hub Compatibility: 135/142 MTB Hubs, 150/157 DH Hubs, 170/177 Hubs

- X-Range gearing technology gives you more range and a smoother gear progression, so you're always in the right gear - New tooth profiles for improved wear - More durable finish - 94mm BCD

- X-Range gearing technology gives you more range and a smoother gear progression, so you're always in the right gear - Specially designed tooth profiles for improved wear - More durable finish - Bolt Circle Diameter (BCD): 107 BCD - Speeds: 12 - Material: Aluminum

Rugged durability comes naturally to the Eagle T-Type direct mount chainring. Finished with a distinct, dual-spoke design your shifting will never be compromised. Available in three different tooth counts, there is ample room to refine and customize your bike’s feel. - 8 Bolt direct mount - 30-38T range and +3mm offset variants - Compatible with T-Type chains

Original equipment on SRAM and Truvativ cranks, these chainrings also work well with other drivetrains.

Replacement PowerGlide ring for 11 speed crankset. - Compatible with Asymmetrical Yaw front derailleurs - Bolt Circle Diameter (BCD): 110 BCD - Material: Aluminum