Brakes/Levers/Pads

Jagwire Sport Organic pads feature an all-new resin compound. Mounted on a steel backing plate, this compound gives good power and modulation, while keeping noise to a minimum. Great for riders primarily riding in dry conditions.

- Thinline: Thinner, longer molded pads for extra clearance and easy adjustment - Red: semi-aggressive compound for good performance - Salmon: aggressive compound for extreme weather conditions - Dual: combination of Salmon and Black compounds for more controlled, smoother stopping

Slip Avid's Rim Wrangler 2 Brake Pad Inserts into your Rim Wrangler 2 cartridges (sold separately) for excellent braking no matter the conditions. The easy-to-use cartridge design makes swapping pads a breeze. They're designed for use with linear-pull brakes.

• Replacement hoods for road brake levers with traditional, non-aero cable routing • Soft, tacky rubber for a sure grip • Available in black or brown

Fits Shimano / SRAM cartridge pad style carrier - All season compound - Length: 55mm - Black

Fits Shimano / SRAM road calipers - All-season compound - Includes mounting bolts and washers - Length: 55mm - Black

- Replacement pads for Campagnolo Super Record 11-speed groups - Black: standard compound designed for dry condition riding - Salmon: aggressive compound for wet weather conditions - Dual: combination of Salmon and Black compounds for more controlled, smoother stopping - Triple: Kool-Stop's most aggressive compound combination for controlled braking in all conditions - Carbon - Kool-Stop's original carbon compound which works great for most carbon wheels but will wear quicker on fast steep descents. - Carbon 2: updated formula for carbon rims, withstands steep descents with reduced wear

- Pair of G-Type disc brake pads without fins, for 1 caliper - Resin Compound - Available with Steel backplate for lower cost or Aluminum backplate for superior heat management - Fits 2-piston SLX and XT calipers from 10 to 12 speed groups and 10 or 11 speed XTR brakes - Interchangeable with F-Type and J-Type pads - Includes spring and pin

The squeeze of our levers is what dreams are made of. Most of our levers can be swapped to be run either front or rear, which is convenient if you like to your brakes reversed and a Godsend if you bust a lever in the middle of the woods. Avid levers are easy to install, simple to set up, and a pleasure to pull. - ReachAdjustment -- Qwik-Adjust Barrel Adjuster Bend Zone

Jagwire's Mountain Sport Disc Brake Pads (Hayes) feature a low-noise, semi-metallic compound mounted to a steel backing plate for excellent braking performance and durability.

Jagwire's Mountain Sport Disc Brake Pads (Formula) feature a low-noise, semi-metallic compound mounted to a steel backing plate for excellent braking performance and durability.

Jagwire's Mountain Sport Disc Brake Pads (Magura) feature a low-noise, semi-metallic compound mounted to a steel backing plate for excellent brake performance and durability.

Jagwire's Mountain Sport Disc Brake Pads (Shimano) feature a low-noise, semi-metallic compound mounted to a steel backing plate for excellent braking performance and durability.

- Extra-long molded pads for MTB linear brakes - Black: standard compound designed for dry condition riding - Salmon: aggressive compound for extreme weather conditions - Dual: combination of Salmon and Black compounds for more controlled, smoother stopping

- Pair of G-Type disc brake pads without fins, for 1 caliper - Resin or Metallic brake compound - Available with Steel backplate for lower cost or Aluminum backplate for superior heat management - Fits 2-piston SLX and XT calipers from 10 to 12 speed groups and 10 or 11 speed XTR brakes - Interchangeable with F-Type and J-Type pads - Includes spring and pin

- Pair of K-Type disc brake pads without fins, for one caliper - Choice of compound: Resin, for improved modulation & lower noise, or Metallic, for improved durability & higher braking power in muddy conditions - Steel backplate for lower cost or Ti backplate for improved heat management and lower weight - Fits all Shimano flat mount gravel & road disc calipers, including Dura Ace BR-R9170, Ultegra BR-R8070, 105 BR-R7070, GRX BR-RX810 and BR-RX400 - Also compatible with XTR BR-M9100 calipers - Interchangeable with L-type finned pads (except for XTR BR-M9100)

Shimano, SM-MA-F203P/P, Disc brake adapter for Post Mount caliper, Front, Post Mount fork, 203mm rotor

Jagwire's Mountain Pro Brake Pads are a nice upgrade for your linear-pull and cantilever brakes. They feature cartridge-style pads that are easily replaced when the time comes. And the pads are made of Jagwire's tried-and-true all-weather compound for excellent stopping and durability.

- Pair of K-Type disc brake pads without fins, for one caliper - Choice of compound: Resin, for improved modulation & lower noise, or Metallic, for improved durability & higher braking power in muddy conditions - Steel backplate for lower cost or Ti backplate for improved heat management and lower weight - Fits all Shimano flat mount gravel & road disc calipers, including Dura Ace BR-R9170, Ultegra BR-R8070, 105 BR-R7070, GRX BR-RX810 and BR-RX400 - Also compatible with XTR BR-M9100 calipers - Interchangeable with L-type finned pads (except for XTR BR-M9100)

Genuine Shimano resin disc brake pads. Compatible Brake Caliper BR-M9100, BR-M9110, BR-M8110, BR-R9270, BR-R8170, BR-R7170, BR-R9170, BR-R8070, BR-R7070, BR-4770, BR-RS805, BR-RS505, BR-RS405, BR-RS305, BR-U5000, BR-RX810, BR-RX400, BR-RX820

Shimano Replacement pads for Road brake shoes - Color: Black - Intended Brake Type: Caliper - Pad Attachment Style: Bolt-In (Caliper) - Pad Type: Replacement Insert - Cartridge - Rim Compatibility: Standard - Shimano Cartridge-type road brake pads fit models: Dura-Ace BR-9000, BR-9010, BR-7900, BR-7800, BR7700 Ultegra BR-6800, BR-6700, BR-6600, BR-6500 105 BR-5800, BR-5700, BR-5500 Non-Series BR-R600, BR-R561, BR-R560, BR-CX70s

- Replacement hoods for your Hylex levers. - Color: Black or Gum - Comes in a set of left and right

- For MTB with lateral pull brakes - Double digit activated lever - Aluminium lever blade and collar - Compatible with grip shifting systems

The Phat Padd was designed specifically for triple wall BMX rims and is a wider pad with more braking surface. Great for 990, U-Brake, and V-Brake systems. Features: - Hardened and plated reinforced steel backbone - Knurl-lock washer system - Available in Threaded and 2024-Aluminum Smooth Post - Rim-friendly compounds Compounds: - Black - Standard compound which is great for all weather conditions, but designed for dry condition riding. - Salmon - One of the most aggressive compounds for extreme all weather conditions especially in the wet, but still superb in the dry.

Linear pull brake noodles come in a variety of configurations designed to be compatible with any housing approach angle.

Jagwire's Mountain Sport Disc Brake Pads (Tektro) feature a low-noise, semi-metallic compound mounted to a steel backing plate for excellent braking performance and durability.

Jagwire Sport Semi-Metallic disc brake pads are a great improvement from OEM. They feature a high-performance semi-metallic compound that blends the low-noise of a resin pad with the durability of a metallic pad. Mounted to a steel backing plate, these are a great all-purpose pad.

These disc brake pads fit a variety of SRAM and Avid brakes and offer industry leading brake compounds for consistent, confident performance. - Low noise, high performance semi-metallic compound lasts longer than resin - Steel backing plate

Jagwire's Mountain Sport Disc Brake Pads (Shimano) feature a low-noise, semi-metallic compound mounted to a steel backing plate for excellent braking performance and durability. - Compatible with Shimano Deore XT M8020, Saint M810 and M820, and Zee M640 - Compatible with TRP Quadiem, G-Spec Quadiem, Slate T4, and G-Spec Slate

The Continental is Kool-Stop's classic conventional design, for use on older bicycles or brake systems with clearance problems. Great for City Bikes and steel rims. Features: - Internal backbone - Nyloc retaining nut - Thicker pad Specifications: - Weight per pair: 41.6 grams - Overall length: 45.5mm - Pad contact width: 9.4mm

- High performance compounds recommended for all-conditions - Steel backing

Braking can be fun by adding a pair of real Vans Brake Shoes. Available in assorted colors. Features: - Rim friendly compounds - Threaded steel post - Steel hardware Specifications: - Weight per pair: 56.9 grams - Overall length: 46.1mm - Pad contact width: 13.1mm

- SLIP RESISTANT & COMFORTABLE - MULTI-TEXTURED GRIP FOR - OPTIMIZED FEEL & CONTROL - UNIVERSAL FIT FOR MOST BRAKE LEVERS - 2 SETS OF LEVER GRIPS INCLUDED

Disc brake adaptors designed to mate Magura disc brakes with a variety of frame mounts and rotor sizes. - Includes hardware to mount adaptor to frame

Avid makes it easy to get a perfectly set up brake with their innovative CPS Hardware Kit. Each kit features a series of washers that make it easy to set up your brake. Step 1: Install the bolts and washers loosely so the caliper can move. Step 2: Squeeze the brake lever. Step 3: Tighten the bolts. It's that simple to get a rub-free setup! This kit includes stainless steel hardware with washers and bolts for both CPS (Caliper Positioning System) mounting and standard (direct-mount)mounting.

The Supra 2 is an updated design of the original Supra. This is one of Kool-Stop's most popular rim pads and offers a thicker friction material for longer life. Features: - Hardened and plated reinforced steel backbone - Patented angled tip plow - Water grooves - Knurl-lock washer system - Self tow in - Available only in Threaded - Rim Friendly Compounds Compounds: - Salmon - Kool-Stop's most famous Salmon compound is also one of our most aggressive compounds for extreme all weather conditions especially in the wet, but still superb in the dry. - Electric - Kool-Stop's E-Electric compound is formulated specifically for the higher speeds and weights of electric bicycles. - Clear - An extreme compound for only experienced trick or trails riders needing a compound that will instantly lock the wheels. - Ceramic - This compound was designed for ceramic coated rims and is great in all weather conditions. - Pink - Colored pads are a semi–aggressive compound that will give you good performance in all weather conditions. Specifications: - Weight per pair: 60.6 grams - Overall length: 66.5 mm - Pad contact width: 9.1 mm

- New resin pads have 50% more durability! - Pair of G-Type disc brake pads without fins, for 1 caliper - Resin compound, for improved modulation & lower noise - Available with Steel backplate for lower cost or Aluminum backplate for superior heat management - Fits 2-piston SLX and XT calipers from 10 to 12 speed groups and 10 or 11 speed XTR brakes - Interchangeable with F-Type and J-Type pads - Includes spring and pin

Shimano Sora BL-R3000 Road Brake Levers - Design to seamlessly function with SL-R3000 - Brake lever is compatible with a wide variety of brake calipers - Not compatible with linear-pull brakes - Brake Lever Actuation: Short Pull

Replacement hoods for your RRL levers.

Kool-Stop disc pads are made with organic materials that are blended and bound together using a resin. The compounds do include small amounts of metal to improve the braking formula but though this is a mined material the pads are largely organic. The term semi metallic can also be used. Kool-Stop has found during testing that their disc pads are rotor-friendly and provide high performance braking throughout the life of the pad. - Qty 1 = enough for 1 wheel

Disc brake adaptors designed to mate Magura disc brakes with a variety of frame mounts and rotor sizes. - Includes hardware to mount adaptor to frame

Magura speed sensor magnet for disc rotor. - Compatible with Magura Storm HC 180mm rotor - Compatible with Magura MDR-C 180mm and 203mm rotors

- Includes a washer and 10,12,14,16,18,20,22 and 30mm backing nuts

- Forged aluminum arms - 102mm arm length - 158g

Lightweight Tektro V-brake with 102 mm long forged aluminum arms for superior brake performance. Adjustment range: 20.5 - 36.5 mm. Black 183 grams / wheel

RockShox Brake Post Kit for most RockShox forks. - Includes 2 posts & 2 washers

Keep your disc brakes working great with Jagwire's Mountain Pro Disc Brake Pads. They have a high-performance semi-metallic compound and lightweight aluminum backing plates to keep the weight low, making them perfect for cross-country riding. These are the correct replacement pads for most Magura disc brakes.

Jagwire Sport Organic pads feature an all-new resin compound. Mounted on a steel backing plate, this compound gives good power and modulation, while keeping noise to a minimum. Great for riders primarily riding in dry conditions. - Fit a variety of Magura brakes and offer industry leading brake compounds for consistent, confident performance - Organic pad for Magura 4-piston brake calipers

Jagwire's Road Pro Brake Pads fit Campagnolo, Shimano and SRAM sidepull brakes. They feature Jagwire's tried-and-true Pro Series compound for excellent braking and durability. The pads are cartridge-style for easy pad replacement without losing your brake shoe position. And there are wheel guides on the shoes to help when you're putting a wheel back on.

Made from super-stiff forged aluminum. Features a two-finger design lever for comfort and a hinged clamp for easy installation and removal. Available in multiple colors! Product Specifications - Size: 7/8" (22.2mm) - Bracket: Hinged - Material: Forged Aluminum - Side: Right (Rear) or Left (Front) - Weight: 3.4oz

Made from super-stiff forged aluminum. Features a two-finger design lever for comfort and a hinged clamp for easy installation and removal. Product Specifications - Size: 7/8" (22.2mm) - Bracket: Hinged - Material: Forged Aluminum - Side: Left (Front) - Weight: 3.4oz

- New resin pads have 50% more durability! - Pair of G-Type disc brake pads without fins, for 1 caliper - Resin compound, for improved modulation & lower noise - Available with Steel backplate for lower cost or Aluminum backplate for superior heat management - Fits 2-piston SLX and XT calipers from 10 to 12 speed groups and 10 or 11 speed XTR brakes - Interchangeable with F-Type and J-Type pads - Includes spring and pin - Disc Pad Material: Resin - Pad Shape: Shimano G-Type/F-Type/J-Type - Backplate: Aluminum - Pad Spring: Included - Cooling Fins: No - Model Compatibility: BR-M8000

Jagwire's Cross Pro Brake Pads use a combination of mountain and road brake-pad technologies for excellent speed control, stopping power and durability so they're ideal for cyclocross use. These brake pads are cartridge style for easy pad replacement without losing your brake shoe adjustment. And there are wheel guides to make wheel installation faster and easier. The Cross Pros are available in threaded or threadless (post-mount) versions to fit most bicycles.

Keep your disc brakes working great with Jagwire's Mountain Pro Disc Brake Pads. They have a high-performance semi-metallic compound and lightweight aluminum backing plates to keep the weight low, making them perfect for cross-country riding. These are the correct replacement pads for most Formula disc brakes.

Keep your disc brakes working great with Jagwire's Mountain Pro Disc Brake Pads. They have a high-performance semi-metallic compound and lightweight aluminum backing plates to keep the weight low, making them perfect for cross-country riding. These are the correct replacement pads for most Shimano disc brakes.

- Compound designed considering the higher weight and faster speed of E-bikes - Tuned for power, durability, and low noise

Steel backed disc brake pad with and organic compound. - Fits Zoom Disc Brakes - Steel Back w/ Organic Compound - Qty 1 = enough for 1 wheel

Keep your disc brakes working great with Jagwire's Mountain Pro Extreme Disc Brake Pads. An aggressive sintered compound is mounted to a vented, steel backing plate making these pads perfect for wet conditions and downhill riding. These are the correct replacement pads for Formula The One, R1, RX, MEGA and RO brakes.

Keep your disc brakes working great with Jagwire's Mountain Pro Extreme Disc Brake Pads. An aggressive sintered compound is mounted to a vented, steel backing plate making these pads perfect for wet conditions and downhill riding. These are the correct replacement pads for most Shimano disc brakes.

Pro Extreme Sintered pads feature an aggressive compound that provides maximum stopping power making it perfect for DH riding. The dense, sintered compound also resists water making it extremely effective in wet conditions.