Brakes/Levers/Pads

- High performance compounds recommended for all-conditions - Steel backing

- High performance compounds recommended for all conditions - Steel backing

Kool-Stop disc pads are made with organic materials that are blended and bound together using a resin. The compounds do include small amounts of metal to improve the braking formula but though this is a mined material the pads are largely organic. The term semi-metallic can also be used. Kool-Stop has found during testing that their disc pads are Rotor Friendly and provide high performance braking throughout the life of the pad. - Qty 1 = enough for 1 wheel

Kool-Stop's E-Bike disc pads are produced with a ceramic barrier between the organic friction material and the steel backing plate to reduce heat transfer into the brake caliper causing brake fade. With the heavier design and quick speeds of Electric bikes, they require a compound that will hold up and provide consistant braking power. - Qty 1 = enough for 1 wheel

Kool-Stop's E-Bike disc pads are produced with a ceramic barrier between the organic friction material and the steel backing plate to reduce heat transfer into the brake caliper causing brake fade. With the heavier design and quick speeds of Electric bikes, they require a compound that will hold up and provide consistent braking power. - Qty 1 = enough for 1 wheel

Kool-Stop's E-Bike disc pads are produced with a ceramic barrier between the organic friction material and the steel backing plate to reduce heat transfer into the brake caliper causing brake fade. With the heavier design and quick speeds of Electric bikes, they require a compound that will hold up and provide consistent braking power. - Qty 1 = enough for 1 wheel

- High performance compounds recommended for all-conditions - Steel backing

• High performance compounds recommended for all-conditions • Steel backing

- High performance compounds recommended for all-conditions - Steel backing

The Tectonic brake pad is a forged alloy holder that allows the rider to customize the exact positioning of the friction materials. The friction inserts are designed to interlock together and are secured into the holder on all sides. The Pad-Lock washer system has been improved by incorporating the convex pivot adjustment into the backing plate; thus allowing for the reduction in the number of washers needed to achieve all spacing requirements. The Tectonic pads come with a multi friction compound set up, but single or dual compounds can also be configured. Features: - Aluminum Holder - Integrated Pad-Lock Hardware - Secured End Cap - Interchangeable Compounds - Offset Post - Water Grooves - Available in Threaded and Cantilever (Non-Threaded) Specifications: - Weight per pair: 50.8 grams - Overall length: 73.3 mm - Pad contact width: 9.5 mm

Organic brake compound with aluminum back plate. Kool-Stop disc pads are made with organic materials that are blended and bound together using a resin. The compounds do include small amounts of metal to improve the braking formula but though this is a mined material, the pads are largely organic. The term semi-metallic can also be used. Kool-Stop has found during testing that their disc pads are Rotor Friendly and provide high performance braking throughout the life of the pad. - Qty 1 = enough for 1 wheel - Formula B4|Racing XC|Extreme FR/DH/B4/Team/PRO/SL model also compatible with Grimeca System 13

With copper plated back plate, Kool-Stop sintered metal disc brake pads are designed to give your bike performance braking in extreme conditions, e.g. XC, downhill, trials and dual slalom riding. Our pads have a quick break-in period so you get maximum performance during those demanding rides when stopping power, durability and long pad life are required.

Kool-Stop's sleek, lightweight cross pad with their triple compound technology is a great choice for competitive cross bike racers. Features: - Forged Alloy Holder - Triple Compound - Lightweight Design Specifications: - Overall length: 54.5 mm - Pad contact width: 7.5 mm

- High performance compound recommended for all-conditions - Alloy backing plate: 50% lighter than steel backing plate

• High performance compound recommended for all•conditions • Alloy backing plate: 50% lighter than steel backing plate

• High performance compound recommended for all•conditions • Alloy backing plate: 50% lighter than steel backing plate

Kool-Stop disc brake pads designed for use with Avid/SRAM disc brakes. - Compatible with SRAM Guide RE and Avid Code R 2010-Current - Designed to give your bike performance braking in extreme conditions, e.g. XC, downhill, trials and dual slalom riding - Sintered brake compound with brass back plate

Kool-Stop disc brake pads designed for use with Avid/SRAM disc brakes. - Features a copper plated backing plate and sintered front for extreme conditions like down hill - Compatible with RED, Force 22 Hydraulic, Level, Rival, and Level TLM

With copper plated backing plate and sintered front these Kool-Stop metal disc brake pads are designed to give your bike performance braking in extreme conditions, e.g. XC, downhill, trials and dual slalom riding. Kool-Stop pads have a quick break-in period so you get maximum performance during those demanding rides when stopping power, durability and long pad life are required.

With copper plated back plate, Kool-Stop sintered metal disc brake pads are designed to give your bike performance braking in extreme conditions, e.g. XC, downhill, trials and dual slalom riding. Our pads have a quick break-in period so you get maximum performance during those demanding rides when stopping power, durability and long pad life are required.

With a copper plated back plate, Kool-Stop sintered metal disc brake pads are designed to give your bike performance braking in extreme conditions, e.g. XC, downhill, trials and dual slalom riding. The pads have a quick break-in period so you get maximum performance during those demanding rides when stopping power, durability and long pad life are required.

The Campi Super Record Holder is a forged aluminum holder with dual pivot adjustment that houses Kool Stop's Dual Compound pads. These pads feature a rear set screw for easy pain free pad replacements. Comes with extra set of hardware to install on older Campi systems. Features: - Aluminum Holder - Water Grooves - Dual Pivot Adjustment - Dual Compound - Rear set screw - Additional hardware for older Campi systems Specifications: - Weight per pair: 34.6 grams - Overall length: 56.3mm - Pad contact width: 8.9mm

• Aluminum backing with extended cooling fins help regulate brake system temperature • High performance organic compound

The Dura 2 Road Holder is a lightweight forged aluminum holder with dual pivot adjustment that houses Kool-Stop's Dual Compound Dura2 Type insert. These holders will fit most Shimano type brake systems. Features: - Aluminum Holder - Water Grooves - Dual Pivot Adjustment - Dual Compound - Ultra lightweight 30g/pair

These Kool-Stop disc brake pads are designed for use with Magura disc brakes. - The Kool-Stop semi-metallic compound is made with organic materials and small amounts of metal bound together to provide high performance braking throughout the life of the pad - Fits Magura Next MT-5 and MT-7 4-piston disc brakes

- SLIP RESISTANT & COMFORTABLE - MULTI-TEXTURED GRIP FOR - OPTIMIZED FEEL & CONTROL - UNIVERSAL FIT FOR MOST BRAKE LEVERS - 2 SETS OF LEVER GRIPS INCLUDED

Disc brake adaptors designed to mate Magura disc brakes with a variety of frame mounts and rotor sizes. - Includes hardware to mount adaptor to frame

Disc brake adaptors designed to mate Magura disc brakes with a variety of frame mounts and rotor sizes. - Includes hardware to mount adaptor to frame

Magura speed sensor magnet for disc rotor. - Compatible with Magura Storm HC 180mm rotor - Compatible with Magura MDR-C 180mm and 203mm rotors

7 Series Disc Brake Pads - The Sport Compound offers powerful braking, high durability, and short bed-in time, making it the perfect brake pad for use with e-bikes - Set of two disc brake pads and two pad retaining bolts for one caliper

- Attachment parts for Magura OEM and braided-stainless hydraulic disc and rim brake tubing

- For long tours these pads offer safety together with excellent performance in all situations. - For MT disc brake 2 piston - 2 single brake pads, 2 pad retaining bolts

Disc brake adaptors designed to mate Magura disc brakes with a variety of frame mounts and rotor sizes. - Includes hardware to mount adaptor to frame

9 Series Disc Brake Pads - One piece connected back plate - Performance compound offers excellent bite for strong braking response in a variety of conditions - Pair of disc brake pads for one MT5, MT7 caliper

Magura mdr-c disc brake rotor - 203mm 6-bolt for ebike silver The Magura MDR-C disc brake rotor is an ideal all-rounder – for city, trail and e-bikes. The improved lateral rigidity reduces vibrations and noise during braking, and also has improved heat resistance and increased stability. - Optimized for eBike use - Prepared for tone wheel or magnet - Wear optimized ring design

Magura Storm Rohloff Disc Rotor - 4-bolt silver - The Magura Storm disc rotor is designed for use with Rohloff Speedhubs. - Designed to offer exceptional cooling - Low noise - 2mm rotor thickness

- Black: all-around performance compound - Salmon (Kool Stop): high grip compound for race/trials use

8 Series Disc Brake Pads - Disconnected two piece back plate - Performance compound offers excellent bite for strong braking response in a variety of conditions - Set of four disc brake pads for one MT5, MT7 Caliper

8 Series Disc Brake Pads - Disconnected two piece back plate - Race compound offers maximum stopping power for those who push their materials to the limits - Set of four disc brake pads for one MT5, MT7 Caliper

- Reinforced hydraulic tubing designed for Magura mineral-oil fluid - Tubing kits are cut-to-fit with one pre-crimped 'fixed' end (90-degree on MT series and Gustav-M) and include one tubing reinforcement insert and compression ferrule/olive per kit - Sold each: (1) kit per brake - Bulk tubing is for RT series road rim brakes, HS-series rim brakes and Julie disc brakes: fittings sold separately - Choose black or white options for MT Next and MT series

Magura mdr-c ebike disc rotor - 203mm center lock w/ lock ring for thru axle silver The Magura MDR-C disc brake rotor is an ideal all-rounder – for city, trail and e-bikes. The improved lateral rigidity reduces vibrations and noise during braking, and also has improved heat resistance and increased stability. - Optimized for eBike use - Prepared for tone wheel or magnet - Wear optimized ring design - Equipped with a center lock mount for corresponding hubs - Center Lock with lockring for thru axle (tool opening engagement)

The Magura MDR-P is a disc rotor for performance-oriented riders and tough tasks ranging from downhill and ebikes to heavy cargo bikes. It features Dovetail Interlink technology, a patented interlocking of the outer and inner rings. This provides additional support for the inner ring if the outer ring expands due to heat. In contrast to floating discs, the torque is transmitted to the dovetail-shaped toothing over its entire surface instead of just the rivets, increasing the rigidity of the brake disc and the degree of heat dissipation under continuous load. The MDR-P is the most powerful brake disc in the Magura portfolio, yet it still offers riders low weight and reduced vibration. - Perfect for demanding applications such as ebike or downhill riding - Two-piece design offers the highest level of heat dissipation and high torque transfer - Wear optimized ring design - Prepared for tone wheel or magnet

- Special patented interlocking of the outer and inner rings (Dovetail Interlink Technology) giving optimum braking performance even under heavy loads - In addition, maximum heat resistance and stability - E-Bike optimized - 6 steel mounting screws included

- An evolution of the MT line, the MT NEXT lineage of brakes is the next generation of braking performance - Carbotecture Body which is a proprietary carbon weave that is nearly twice as strong as carbon laminates, aluminum or magnesium - Carbotecture radial design master-cylinder/lever with 2-finger alloy lever blade and clamp with adjustable reach, flip/flop design, and EBT or Easy Bleed Technology port on reservoir - Double Arch forged 2 piston monoblock caliper design that features anti-heat, anti-drag, anti-squeal, and magnetiX brake pad system for easy pad replacement - Full-hydraulic Magura Royal Blood mineral oil system with a 5-year leakproof warranty - Includes flip/flop front or rear lever, 2000mm pre-bled tubing kit, 74mm post-mount caliper, MC/lever, alloy hardware, tubing shortening bits, and manual

The HS33 R is the newest hydraulic safety rim brake in radial design in a portfolio of test-winning products. With its high braking power, reduced weight and perfect ergonomics, it makes an ideal partner for both road and off-road – and is equally suited for traditional, city and eBikes. Well worth a demo! - The improved legendary HS33 rim brake features a redesigned master cylinder and 2 finger lever blade - Full hydraulic rim brake system: closed design (no reservoir) - Mounts to cantilever/linear brake post studs (fork and/or frame) - Streamlined alloy brake lever assembly with integrated (TPA) Turbo Pad Wear Adjuster and integrated reach adjust - All hose fittings perfectly hidden with new designed caps - Compatible with all trigger and twist grip shifters - Full-hydraulic Magura mineral oil system with a 5-year leakproof warranty - Includes: flip/flop front or rear lever, 1350mm pre-bled (cut-to-fit) tubing, stud-mounted slave cylinders with mounting hardware, MC/lever, and manual (brake boosters included)

Made from super-stiff forged aluminum. Features a two-finger design lever for comfort and a hinged clamp for easy installation and removal. Product Specifications - Size: 7/8" (22.2mm) - Bracket: Hinged - Material: Forged Aluminum - Side: Left (Front) - Weight: 3.4oz

Made from industry-standard diecast aluminum, featuring extra-wide brake arm bends for large tire clearance and low-profile spring adjustment caps for universal functionality. Includes a simple one-piece straddle cable hanger system, brake pads, and all necessary hardware. The updated V2 design gives additional clearance, and the flat brake arm profiles eliminate any chance of brake arm rub. Product Specifications - Type: 990 U-Brake - Material: Die-Cast Aluminum - Includes: Brakes, Bolts, Pads, Straddle Cable - Weight: 5.9oz

This kit includes everything you need to set up a fresh set of brakes on your bike! Now includes the updated Cease V2 brake design. Product Specifications - Brakes: Mission Cease V2 - Lever: Mission Captive - Cable: Mission Capture - Weight: 13oz

- Works well as a rear brake where the Neo-Retro may cause heel clearance problems - Compatible with drop bar levers and short pull mountain bike levers - Sealed pivot system with adjustable spring tension and Kool Stop pads - Recommended for standard pull (not linear pull) brake levers - Made in USA

- Mini-v brake for use with standard short pull (road) brake levers - Direct pull cantilever brake is simpler to install than a traditional cantilever brake and gives a narrow profile - Short curved arms give plenty of clearance for cyclocross tires or wide fenders - Spring tension is independently adjustable for each arm, so the brake can be precisely centered on the wheel and adjusted for return strength - Simple pivoting quick release on one arm makes it easy to open the brake to remove a wheel - Made in USA

- Reversible 6061 aluminum arms for left or right cable routing - Quick-release noodle is lined with Teflon for smooth action - High tension square wire springs - Thinline threaded pads with easy-to-adjust arm hardware - Made in USA

Profile Design's carbon-specific brake pads are specially formulated to improve braking performance when you're using carbon rims. Profile Design's TwentyFour Series wheels require the use of these P220 carbon-specific brake pads.

Profile's 3/One Aluminum Aerobrake Levers are light and supremely aerodynamic, the perfect complement to your cutting-edge triathlon or time-trial bicycle. They boast feathery, stiff, and ergonomic 1-finger aluminum levers with a composite mount, and internal cable routing capabilities for optimum aerodynamics (cables sold separately).

Profile's 3/One Caron Aerobrake Levers are light and supremely aerodynamic, the perfect complement to your cutting-edge triathlon or time-trial bicycle. They boast feathery, stiff, and ergonomic 1-finger carbon levers with a composite mount, and internal cable routing capabilities for optimum aerodynamics (cables sold separately).

RockShox Brake Post Kit for most RockShox forks. - Includes 2 posts & 2 washers

- Parts listed are for servicing and overhauling a single master cylinder/lever assembly

- Includes a washer and 10,12,14,16,18,20,22 and 30mm backing nuts

SRAM's Pad Inserts are the perfect upgrade for your brakes to deliver excellent stopping power and speed modulation. The secret is SwissStop's proprietary compound that resists heat buildup for a consistent grip without being "grabby." They have deep grooves to whisk away water so they're perfect for road and cyclocross alike.

- Available for carbon and aluminum - Easy to replace and service - Wear evenly and maximizes braking power - Pad Material (RB): Rubber - Type (RB Pads): Road/CX - Rim Compatibility (RB): Aluminum - 2 Pack

SRAM road disc brake pads are designed for use with SRAM road hydraulic disc brakes (HRD). - For use with Level Ultimate & Level TLM Brakes - Pad Material: Organic - Type: Road/CX - Includes guide pin, clip, & pad spreader