Protective/Armor

Our super-light Kids Transition pads are designed for the little rippers out there that ride scoot or pedal bikes. The Kids Transition pads mould with body heat to provide maximum comfort with a breathable mesh back panel to wick moisture away from the skin.

Xmatter elbow pad, EN1621-1:2012 Material composition: 100% PU Conformity: - EN1621-1:2012 (L1) - REACH: EN14362-1:2012, EN14362-3:2012, PFOS/PFOA (SGS Taiwan Ltd.)

Xmatter knee pad A-Type short, EN1621-1:2012 - Material composition: 100% PU Conformity: - EN1621-2:2014 (L1) - REACH: EN14362-1:2012, EN14362-3:2012, PFOS/PFOA (SGS Taiwan Ltd.)

- Protective padding for outer ankle bone - Sold in pairs

- Impact-absorbing SmartFlex pads shield your hips from unexpected impacts - Silicone grippers on the back of each pad assure they stay in place - Ventilated pads - Pads are waterproof and will not absorb water or sweat

Xmatter asymmetrical knee pad, B-Type long, EN1621-1:2012 - Material composition: 100% PU Conformity: - EN1621-1:2012 (L1) - REACH: EN14362-1:2012, EN14362-3:2012, PFOS/PFOA (SGS Taiwan Ltd.)

Developed for cyclists who want enhanced flexibility, ventilation, and freedom of movement, Joint VPD Air Elbow is a light-duty elbow pad that uses our lightweight and highly impact-absorbent VPD compound. The pad is covered in reinforced stretch fabric and features neoprene antislip to keep the pad in place, even in rough riding conditions. A crash retention strap further increases security on this lightweight and low-profile elbow pad ideally suited to trail riding. - Lightweight and impact absorbing VPD compound - Reinforced stretch fabric - Neoprene anti-slip on the inside - Designed with a low profile - Crash retention strap (CRS) for a comfortable fit - Neoprene anti-slip on the inside

RIDECAMP is your simple, sleek and effective choice for light-duty ride needs. - Lightweight slip on sleeves - Pre-curved chassis for attack position - Lightly padded nylon anti-abrasion outer skin - Fully perforated neoprene chassis for breathability - Tacky silicone elastic webbing to prevent slippage - Fully ventilated rear mesh for maximum cooling (CE Directive 89/686/EEC MTB)

RIDECAMP is your simple, sleek and effective choice for cross-country and light-duty ride needs. - Lightweight slip-on sleeves - Pre-curved chassis for attack position - Lightly padded nylon anti-abrasion outer skin - Fully perforated neoprene chassis for breathability - Tacky silicone elastic webbing to prevent slippage - Fully ventilated rear mesh for maximum cooling

Lightweight and flexible padding that is barely noticeable - ideal for riders who want complete freedom of movement and reliable protection. The VPD Air padding is both highly flexible and highly ventilated for optimal freedom of movement, comfort and temperature control. The pad is housed in reinforced stretch fabric that stays securely in place thanks to an inner lining of anti-slip neoprene and an elastic strap with velcro fastening. A low-profile design further supports practicality and comfort, enhancing the barely-there feel of the pads. - Lightweight and impact-absorbing VPD compound - Reinforced stretch fabric - Elastic strap for a comfortable fit - Neoprene anti-slip on the inside - Designed with a low profile

The Hack Evo guards are our entry-level option for soft protectors. They combine the characteristics of the Flow and Carve series cost-effectively. These knee guards are light and extremely comfortable to wear. - Qmatter, protective padding - Low friction impact shells to absorb and distribute impact - Silicone stopper - AeroMesh light, moisture wicking, breathable, anti-bacterial - EN1621-1:2012 (L1)

- Body-mapped, impact-absorbing SmartFlex pads layered on top of a ventilated, soft inner foam layer allowing for maximum protection, comfort, and breathability - SmartFlex pads offer form-fitting and lightweight protection that is flexible as you ride and hardens on impact - Anti-abrasion material at calf protects sleeve and skin against pedal strikes - Moisture-wicking, UPF 50+ fabric - Machine washable - Compression sleeves with grippers at the top and bottom to keep guards in place - CE 15613 impact with 1621 coverage

iXS’s Hack EVO Kids Elbow Pads provide a perfect blend of minimal weight, low-profile design, and ample protection for youth trail-riding needs. Comfortably pedal to the top in them or slide them into your bag and slip them on for the rowdy descent. Loaded with high-tech features, the Hack EVO pads are great for seasoned pros and newbs alike. Their AeroMesh material is lightweight and extremely breathable to help keep your arms cool and dry, even on hot summer days. And, it’s antimicrobial so it doesn’t absorb odor. iXS’s Qmatter padding makes the Hack ideal for trail-riding with its lightweight, supple foam that allows maximum mobility and disperses shock forces during impact. Other highlights: - NockOut: vented 3D padding in critical areas including lower leg, upper leg, and inner/outer knees - Nylon cover: heavy-duty nylon covers resist damage, even after repetitive abrasions - Wide Velcro straps provide maximum security and comfort to keep pads in place - Silicone strips inside prevent slippage for a secure fit while pedaling and descending - Youth sizing

Our super-light Youth Transition pads are designed for younger riders looking for lightweight protection that can be worn all day long. The Transition pads mold with body heat to provide maximum comfort with a breathable mesh back panel to wick moisture away from the skin. - High length compression design to prevent the pad from slipping - Silicone printed gripper on inside of cuffs - Mesh back for increased airflow - Certified CE EN 1621-1:2012 Level 2

- Body-mapped, impact-absorbing SmartFlex pads layered on top of a ventilated, soft inner foam layer allowing for maximum protection, comfort and breathability - SmartFlex pads offer form-fitting and lightweight protection that is flexible as you ride and hardens on impact - Moisture-wicking, UPF 50+ fabric - Machine washable - Compression sleeves with grippers at the top and bottom to keep guards in place - CE 15613 impact with 1621 coverage

RIDECAMP is your simple, sleek and effective choice for cross-country and light-duty ride needs. - Lightweight slip-on sleeves - Pre-curved chassis for attack position - Lightly padded nylon anti-abrasion outer skin - Fully perforated neoprene chassis for breathability - Tacky silicone elastic webbing to prevent slippage - Fully ventilated rear mesh for maximum cooling - CE Directive 89/686/EEC MTB

The Hack Evo+ guards are our starter option for soft protectors. They combine the characteristics of the Flow and Carve series cost-effectively. These guards are light and extremely comfortable to wear. - Qmatter, protective padding - Silicone stopper - AeroMesh- light, moisture wicking, breathable, anti-bacterial - EN1621-1:2012 (L1)

iXS’s Hack EVO Kids Knee Pads provide a perfect blend of minimal weight, low-profile design, and ample protection for your trail-riding needs. Comfortably pedal to the top in them or slide them into your bag and slip them on for the rowdy descent. Loaded with high-tech features, the Hack EVO pads are great for seasoned pros and newbs alike. Their AeroMesh material is lightweight and extremely breathable to help keep your legs cool and dry, even on hot summer days. And, it’s antimicrobial so it doesn’t absorb odor. iXS’s Qmatter padding makes the Hack ideal for trail-riding with its lightweight, supple foam that allows maximum mobility and disperses shock forces during impact. Other highlights: - NockOut: vented 3D padding in critical areas including lower leg, upper leg, and inner/outer knees - Nylon cover: heavy-duty nylon covers resist damage, even after repetitive abrasions - Wide Velcro straps provide maximum security and comfort to keep pads in place - Internal silicone strips prevent slippage for a secure fit while pedaling and descending - Youth sizing

Super Light Minimalist design keeps weight low and a slim profile means the Transition elbow pads can easily go unnoticed under a jersey. Internal silicone strips combined with a compression fit mean the pads form closely around the upper and forearm giving a consistent non-slip fit. Breathable The breathable 4-way stretch mesh runs the full length on the inside of the pads keeping free from moisture build-up. - High length compression design to prevent pad from slipping - Silicone printed gripper on inside of cuffs - Mesh back for increased airflow - Tested beyond CE EN 1621-1:2012 Level 2 - Pre-curved fit for ultimate comfort - S: S: 8''-10'' (20-25cm), M: 10''-12'' (25-30cm), L: 12''-14'' (30-35cm), XL: 14''-16'' (35-40cm) - Take measurement from the widest part of the bicep - Weight 245g (size L)

The Hack Evo+ guards are our starter option for soft protectors. They combine the characteristics of the Flow and Carve series cost-effectively. These guards are light and extremely comfortable to wear. - Qmatter, protective padding - Silicone stopper - AeroMesh- light, moisture wicking, breathable, anti-bacterial - EN1621-1:2012 (L1) - Available in youth sizing

Designed with valuable feedback from the legend himself, the Sam Hill Lite signature elbow pad builds off of our popular Transition elbow pad to be the ultimate ultra-lightweight elbow pad for all types of riding or racing. Light enough to be worn all day long. The Sam Hill Lite elbow pads mold with body heat to provide maximum comfort with a breathable sleeve to wick moisture away from the skin. CE Certified Level 1. Compression square line Ripstop Spandex fabric allows for a durable lightweight feel along with great airflow. - Rollable and stash-able using the elastic loop - Durable elbow cap fabric for increased durability and protection - Compression square line Ripstop spandex allows for a durable lightweight feel - Long bicep length fit for no slippage and all-day comfort - Articulated cut for the perfect fit - Silicone top and bottom elastic gripper - Certified CE/ EN 1621/1 Level 1 - Weight 105G pair (size XL)

Without compromising on safety and surpassing the relevant CE test the Transition pads offer comfortable protection in a super-light package. At 262g per side in Medium they are a true fit-and-forget piece of kit. - Low profile, minimal protection at its best - Compression fit kneepad with high-strength, flexible 1mm cap for superior fit and movement - Poly/Spandex and 4 way stretch mesh that is rollable and stowable enough to fit in a jersey pocket - Designed beyond CE EN 1621/1 Standards

- Body-mapped, impact-absorbing SmartFlex pads layered on top of a ventilated, soft inner foam layer allowing for maximum protection, comfort, and breathability - SmartFlex pads offer form-fitting and lightweight protection that is flexible as you ride and hardens on impact - Moisture-wicking, UPF 50+ fabric - Machine washable - Compression sleeves with grippers at the top and bottom to keep guards in place - CE 15613 impact with 1621 coverage

Three protective layers: - Layer 1: DuraTx adds durability to pads and resists tearing or catching. - Layer 2: Body-mapped, impact-absorbing SmartFlex pads. - Layer 3: Soft inner foam keeps pads secure and comfortable - Knee sleeve has been extended with the additional protection on lower-shin - Adjustable fit-strap on knee guard for the perfect fit - Strap across forearm on elbow guard keeps pads in place - New high performance, extra-wide top gripper offers optimum level of pad security and a splash of color - Ventilated mesh back keeps the wearer cool and dry - Ultra-comfortable double-knit compression fabric for extra protection - Seam-reinforced binding to improve durability - CE-1621-1 certification - Machine washable

The Hack Evo+ guards are our starter option for soft protectors. They combine the characteristics of the Flow and Carve series cost-effectively. These guards are light and extremely comfortable to wear. - Qmatter, protective padding - Silicone stopper - AeroMesh- light, moisture wicking, breathable, anti-bacterial - EN1621-1:2012 (L1)

TERATEC Plus Protection is designed with the principle of right materials, right places. Designed specifically to offer great impact protection in a slim, form fitting chassis. Upgraded with additional, dense, lateral protection padding, these guards offer excellent SmartShock CE Level 1 impact protection and abrasion resistance. All while still offering maximum breathability and flexibility. - Impact tested and certified to CE EN 1621-1:2012 Level 1 - Sleek, comfortable slip-on sleeves - Lateral protection upgrades over the Teratec - Completely pre-curved chassis for attack position - Nylon, anti-abrasion, outer skin - Mobility flex joint for smooth articulation - Tacky silicone elastic webbing helps prevent slippage - Fully ventilated rear mesh for maximum cooling

The Hack Evo+ guards are our starter option for soft protectors. They combine the characteristics of the Flow and Carve series cost-effectively. These guards are light and extremely comfortable to wear. - Qmatter, protective padding - Silicone stopper - AeroMesh- light, moisture wicking, breathable, anti-bacterial - EN1621-1:2012 (L1) - Available in youth sizing

Our super-light Youth Transition pads are designed for younger riders looking for lightweight protection that can be worn all day long. The Transition pads mould with body heat to provide maximum comfort with a breathable mesh back panel to wick moisture away from the skin.

The Carve models manage without hard shells and are therefore light and extremely comfortable to wear. They are ideal for somewhat harder use and, with the integrated Xmatter padding concept provide high impact absorption and protection. With the Carve Evo+ Kids Elbow Guard, iXS introduces product properties like exchangeable padding and next-generation, structurally improved AeroMesh. offering a higher level of comfort and structural strength. - Xmatter Protection Foam (exchangeable) - AeroMesh, Light, Moisture Wicking, Breathable, Anti-bacterial, Added Structural Strength, High Level Of Comfort - Looplock Closings - Silicon Stopper - En1621-1:2012 Certified - Youth sizing

Flex Knee pads are for riders looking for soft pad comfort with the protection of a hard shell. Abrasion-resistant material covers the front and sides to give a full-on protection package. - Double layer custom foam for increased airflow and reduced weight - Upper calf muscle support to prevent pad from slipping - Center adjustment strap provides even tension above calf muscle and around top of pad - Custom idp polygon neoprene for superior protection and ventilation - Designed beyond CE EN 1621/1 Standards