Filter By:
Full-Suspension
$7,500.00
$12,999.00
42% Off
Ibis Exie USA X01 Eagle Bike (2021)
NOTE: This is a former shop demo/rental bike. All demo bikes have had a comprehensive service and inspection, but may have minor wear and scratches from use. Please see images for condition and reach out to the shop for any questions or more images. Some parts may differ from original equipment; please see full specs below.
Wheel Size: 29"
Frame Material: Carbon Fiber
Frame Material Details: Carbon front and rear triangles, molded chainstay protection
Rear Travel: 100mm
Rear Shock: FOX FLOAT DPS Factory, remote lockout, Kashima coating, 190mm length x 45mm stroke
Fork: FOX FLOAT 34 Step-Cast (SC) Factory, FIT4 damper, remote lockout, Kashima coating, 44mm offset
Fork Travel: 120mm
Headset: Cane Creek 40; IS41/28.6 upper, IS52/40 lower
Handlebar: Ibis Carbon Hi Fi, 800mm width, 31.8mm clamp diameter
Stem: Industry Nine A318, 31.8mm bar clamp
Brakes: Shimano Deore XT M8100, 2-piston, Shimano RT86 rotors (180mm front, 160mm rear)
Brake Levers Shimano Deore XT M8100
Shifters: SRAM X01 Eagle, 12-speed
Front Derailleur: None
Rear Derailleur: SRAM X01 Eagle, 12-speed
Cranks: SRAM X01 Eagle Carbon DUB
Chainring: absoluteBlack Oval
Bottom Bracket: SRAM DUB, 73mm English/BSA threaded
Chain: SRAM X01 Eagle, 12-speed
Cassette: SRAM X01 Eagle XG-1295, 12-speed, 10-52 tooth
Rims: Ibis S28 Carbon
Hubs: Industry Nine Hydra
Tires: Maxxis Aspen 29x2.4
Saddle: Fizik Alpaca
Seatpost: BikeYoke Revive dropper
$9,699.00
Introducing the HD6, the evolution of one of the most successful enduro bikes in history. Designed with input from our Enduro World Cup team and building upon our award-winning Ripmo and HD lines, the HD6 features increased travel, a completely redesigned suspension layout, and mixed wheels.
GEOMETRY
The 29" front wheel, bolstered by 180mm of travel, assures stability, whereas the 27.5" rear wheel allows for additional maneuverability. The 165mm of travel skillfully manages any fallout. With a 64-degree head tube angle (one-degree slacker than the current Ripmo), a BB height similar to Mojo HD5, and chainstay length identical to the current Ripmo (despite the 27.5" rear wheel), the bike maintains an equilibrium between agility and stability.
FIVE SIZES
In order to place every size rider in the same position over the rear wheel, the HD's seat tube angles get steeper as frame size increases. With four sizes, this would have resulted in larger jumps in reach, so we added a fifth size. The smaller increments across five sizes means that you can find just the right size. We encourage riders to choose their bike size based on their desired reach and top tube measurements.
COIL COMPATIBLE
Our upper link suspension layout is progressive enough to be sensitive off the top, yet supportive enough for the biggest hits. It is also compatible with all coil shocks, for those longer race stages that can tax air shock performance.
DW-LINK
The suspension layout may be new, but it's still DW-Link. The inherent efficiency means you don't need an overdamped shock to climb well. Less shock damping allows the wheels to stay planted on the ground, providing more traction and that hover-bike feel that our frames are known for. The HD6 climbs with a finesse that defies its enduro race pedigree.
TRACTION TUNE
Our custom tuned front and rear suspension feature extra light high speed compression and rebound damping to deliver unparalleled traction. This allows the wheels to flutter through rough terrain like a trophy truck storming through a set of whoops.
BUSHINGS
Tired of buying bearings each season? So were we. That's why we've strategically employed bushings where they're most effective and bearings elsewhere. The IGUS bushings in our lower link are not only lighter and stiffer, they're virtually maintenance-free. We believe so strongly in them, we back them with free lifetime replacement.
LIGHTWEIGHT PREMIUM CARBON
All our bikes are built from the highest grade materials and optimized for the best strength, weight, stiffness, and ride performance, no matter how much you spend. The HD6 frame is sub 6 lbs without shock and our complete Enduro ready builds weigh as little as 32 lbs.
INTERNAL CABLE ROUTING
Bikes that look pretty on the outside should look pretty on the inside. We use carbon fiber tubes molded within each frame. Push the cable in, watch it pop out a beautiful moment indeed.
PROTECT YOUR INVESTMENT
A thick rubber downtube protector deflects debris, while our chainstay protector features thick raised sections to help dampen chain slap noise. And our simple-yet-elegant linkage protectors stop mud and rocks thrown by the tire, keeping your beautiful bike beautiful.
LIFETIME WARRANTY
If it's our fault, we'll fix it. Simple as that.
$7,279.20
$9,099.00
20% Off
The Ripley is our snappy, flickable, playful, fast, lightweight, and versatile 29” trail bike. Its combination of modern geometry, a stiff lightweight carbon chassis, and 120mm of ultra efficient dw-link travel, means it’s equally happy popping off bonus lines as it is crushing all day epics.
$9,099.00
The Ripley is our snappy, flickable, playful, fast, lightweight, and versatile 29” trail bike.
Its combination of modern geometry, a stiff lightweight carbon chassis, and 120mm of ultra efficient dw-link travel, means it’s equally happy popping off bonus lines as it is crushing all day epics.
With its well balanced modern geometry, the Ripley is ready for any adventure. The long front end, slack head angle, and short rear end gives you the confidence to try new lines, while the steep seat tube angle and shorter offset fork makes it easy to maneuver technical climbs and flowy singletrack.
The Ripley V4S features a new UDH dérailleur for maximum future compatibility and moves to a 55mm chain line. The wider chain line allows for a stiffer chainstay.
$9,499.00
What if we took everybody’s favorite bike and made it a little slacker and little longer? Hell, what if we made it more progressive and coil compatible? And that’s exactly what we did for the Ripmo V2S. Active ingredients include: 29” wheels, berm-defying cornering tendencies, and a love for long rides.
The Ripmo and Ripmo AF share the same steep, 76-degree seat tube angle and a rangy but not stratospheric reach, which places riders centrally over the pedals. It makes for an efficient position that can go the long haul. The slack 64.9 headtube angle and 44mm reduced-off set fork doesn’t wander while climbing, and doesn’t hold you back descending. It works?—?all day up, all day down, all day in between.
The Ripmo V2S features a new UDH dérailleur for maximum future compatibility and moves to a 55mm chain line. The wider chain line allows for a stiffer chainstay.
Page 1 of 1