Parts & Accessories

- QR Locking Hitch Pin for Adams Trail-A-Bikes

- 4 piece sleeve set for Adams Trail-A-Bikes - Includes new shim for oversized seatposts that fits 25.4mm to 35.0mm and beyond

• 4 times greater strength • Fits seatposts from 25.4mm to 35.0mm • Retro fittable to all 15mm block, horizontal pin style Trail-a-Bikes • Fits late 1998 to present • Comes with 4 shims

This adapter spaces out the Steel Hitch allowing bike frames with hooded/tight rear dropouts to have hitch clearance. This adapter is also used in breezer style dropout applications for proper hitch installation.

Burley replacement flag kit. Breaks down into two pieces. Reaches 6' high total.

This part connects the trailer with a square tow bar to the hitch. It attaches inside the tow bar and locks in place inside the hitch using a retaining pin (Standard Forged Hitch & Steel Hitch) or bolt and nut (Classic Hitch). This flexible connector can stretch easily to allow the rider to lay down the bike. Includes safety strap with retaining pin for use with the Standard Forged Hitch or Steel Hitch. If being used with the Classic Hitch the Classic Hitch Safety Strap (part 950067) will also need to be purchased.

This part connects the trailer with a round tow bar to the hitch. It attaches inside the tow bar and locks in place inside the hitch using a retaining pin (Standard Forged Hitch & Steel Hitch) or bolt and nut (Classic Hitch). This flexible connector can stretch easily to allow the rider to lay down the bike. Includes safety strap with retaining pin for use with the Standard Forged Hitch or Steel Hitch. If being used with the Classic Hitch the Classic Hitch Safety Strap (part 950067) will also need to be purchased.

The Steel Hitch provides the critical connection from your Burley Trailer to your bicycle. The hitch installs easily on the rear skewer of your bike, and then stays attached so the Burley can be connected at any time. If you’d like to swap the Burley from bike to bike, pick up a couple spare hitches and install them on the extra bikes so the hitch doesn’t need to be un-installed when swapping bikes.

Small but mighty, the Pet Trailer Pouch is the ultimate versatile storage solution. The large, zippered pocket is perfect for carrying smaller gear or for cleanly packing out pet waste. With integrated attachment points on the side of each pet trailer, securing the Pet Trailer Pouch is a breeze. Biking, hiking, or strolling, this added storage option is the perfect solution for you and your furry friend's next adventure.

A Burley Ballz Thru Axle is required for any bike with a 12mm rear thru axle to use the Coho XC (stock thru axles are not able to accommodate any sort of axle mounted hitch system). The Burley Ballz Thru Axle is not compatible with all carbon fiber bike frames (consult manual). - Official Burley Ballz adapter for bikes with 12mm rear thru axles - Includes both the thru axle and Ballz hitch mounts - Quick and easy installation - Specially designed for use with the Coho XC

Find new horizons and discover new trails when you hitch your bike to a Coho XC cargo trailer using the Coho 5mm Skewer. Available in multiple lengths, simply replace your bike's current QR skewer with the Coho 5mm Skewer and you're ready to hit the trail. Note: The Coho 5mm Skewer is required for any bike with a QR skewer to connect to the Coho XC. This skewer will replace your bike's current skewer when using the Coho XC. Features: - Allows bikes with QR axles to connect to the Coho XC trailer - Quick and easy installation - Durable construction

Burley's adapter for bikes with a 12mm thru axle. Stock thru axles are not able to accommodate any sort of axle mounted hitch system. These thru axles have an external male threading on the end to accommodate the installation of Burley's axle mounted hitch system.

Find new horizons and discover new trails when you hitch your bike to a Coho XC® cargo trailer using the Coho® Thru Axle. Designed for bikes with 12mm thru-axles, the Coho Thru Axle is available in multiple thread pitches and lengths to accommodate a wide range of bikes. Note: The Coho Thru Axle is required for any bike with a 12mm rear thru-axle to connect to the Coho XC. Stock axles are not compatible with the Coho XC hitching system.

Find new horizons and discover new trails when you hitch your bike to a Coho XC® cargo trailer using the Coho® Thru Axle. Designed for bikes with 12mm thru-axles, the Coho Thru Axle is available in multiple thread pitches and lengths to accommodate a wide range of bikes. Note: The Coho Thru Axle is required for any bike with a 12mm rear thru-axle to connect to the Coho XC. Stock axles are not compatible with the Coho XC hitching system.

Keep extra treats, leashes, and other essentials handy with the Bark Ranger™ Bag. Attachment points along the top of the Bark Ranger™ and Bark Ranger™ XL let you quickly and securely increase your trailer's cargo capacity. Large and small zippered pockets provide multiple storage options for you and your pet's gear while on the go.

Convert your Burley into a jogging stroller. It's the perfect way to expand the capabilities converting the trailer to a jogger. Tracking adjustment fine tunes the orientation of the front wheel. It's the perfect accessory for any family on the run.

The perfect way to get more out of your Burley, the Jogger Kit converts your Solo trailer to a jogger. This kit makes it easy for families to keep fit on the run. Compatible with the Solo (2007-Current)

The Robert Axle Project QR Hitch Adapter is a high quality, finely machined hitch adapter for towing single-arm trailers on bikes with 5mm quick release rear axles. Our stainless steel, QR Hitch Adapter helps trailer hitches fit more bikes, easily clearing hooded and interfering dropouts. Easy to install, by simply replacing the QR nut. Our adapter uses a 5mm hex to ensure your hitch and pre-cious cargo are more securely attached than other knurled adapters. The 5mm hex also isolates and protects dropouts from marring and over-tightening of the quick release when installing the hitch.

The adapter threads on to axles with an M10x1.0 thread. Common hubs with this axle are; Rohloff, Enviolo, Shimano Nexave, SRAM I-Motion, and SRAM Torpedo. Our hitch adapter for towing kid trailers and single-arm bike trailers is high quality and precisely machined. This includes all the two-wheeled child, pet and cargo trailers such as: Thule, Chariot, Burley, Instep, Carry Freedom, and many more. Our hitch adapter is made of stainless steel and is incredibly durable. The Robert Axle Project Hitch Adapter helps trailer hitches fit more bikes. It easily clears hooded dropouts and other interfering dropouts. Simply replace the existing non-driveside nut with our adapter, and attach the hitch that came with your trailer. Our hitch adapter uses a 17 mm wrench to attach your hitch and precious cargo more securely than with other adapters. When installing the hitch, the 17 mm wrench isolates and protects dropouts from marring and over-tightening that could ruin your bike’s frame.

The adapter threads on to axles with an M12x1.25 thread. The Robert Axle Project Trailer Hitch Adapter for Rad Power Bikes and Mahle/EBIKEMOTION Equipped E-Bikes. Our hitch adapter for towing kid trailers and single-arm bike trailers is high quality and precisely machined. This includes all the two-wheeled child, pet and cargo trailers such as: Thule, Chariot, Burley, Instep, Carry Freedom, and many more. Our hitch adapter is made of stainless steel and is incredibly durable. It’s built to handle towing a fully loaded bike trailer. It easily clears a variety of dropouts. It is easy to install. Simply replace the existing non-driveside nut with our adapter, and attach the hitch that came with your trailer. Our hitch adapter uses a 17 mm wrench to attach your hitch and precious cargo more securely than with other knurled adapters. When installing the hitch, the 17 mm wrench isolates and protects dropouts from marring and over-tightening.

Purchase our Kid Trailer axle for your bike, and share your stoke for cycling with your kids. Simplify your life by allowing quick and secure attachment of your trailer to your best and favorite bike. Enjoy the adventure. Robert Axles for Kid Trailers are designed specifically to fit your 12mm thru-axle bike and allow attachment of any hitch-mounted trailer. These fit any trailer that has two wheels and a single point of attachment to the axle. This includes all the two-wheeled child, pet, and cargo trailers such as Thule, Chariot, Burley, Instep, Carry Freedom, and many more. - The axle shaft and axle end are precision CNC-machined. - The axle shaft is 7075 aluminum and hard black-anodized for rugged durability. - The stainless steel axle end allows for mounting of the hitch provided with your trailer. - Hardware for attachment of the hitch is included; the hitch, itself, is not. - No special tools required. Design allows for wheel installation and removal using your standard 5mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world.

Yes! A 12mm thru-axle adapter for BOB Trailers. These Robert Axles for BOB Trailers are specifically engineered to attach the proven BOB Trailer to your thru-axle-equipped bike. Take full advantage of your modern bike with 12mm thru-axles and harness the rigidity of the thru-axle to haul your BOB Trailer. Set out on any adventure, big or small. Great for off-road tours, trail building, hauling cargo, and more! - The axle shaft and axle end are precision CNC-machined. - The axle shaft is 7075 aluminum and hard black-anodized for rugged durability. - The axle ends are stainless steel which allows for mounting of the BOB Trailer bobbins. - No special tools required. The design allows for wheel installation or removal using your standard 5mm hex wrench. - Please note: This axle does not come with the BOB Trailer bobbins (those are available separately). Or, you can reuse your bobbins from the stock BOB Trailer Quick Release that came with your trailer. - Designed, built, and quality tested in the USA. Proven around the world.

Robert Axles for Kid Trailers are designed specifically to fit your 12mm thru-axle bike and allow attachment of any hitch-mounted trailer. These fit any trailer that has two wheels and a single point of attachment to the axle. This includes all the two-wheeled child, pet, and cargo trailers such as Thule, Chariot, Burley, Instep, Carry Freedom, and many more. Purchase our Kid Trailer axle for your bike, and share your stoke for cycling with your kids. Simplify your life by allowing quick and secure attachment of your trailer to your best and favorite bike. Enjoy the adventure.

Robert Axles for Kid Trailers are designed specifically to fit your 12mm thru-axle bike and allow attachment of any hitch-mounted trailer. These fit any trailer that has two wheels and a single point of attachment to the axle. This includes all the two-wheeled child, pet, and cargo trailers such as Thule, Chariot, Burley, Instep, Carry Freedom, and many more. Purchase our Kid Trailer axle for your bike, and share your stoke for cycling with your kids. Simplify your life by allowing quick and secure attachment of your trailer to your best and favorite bike. Enjoy the adventure. - This Kid Trailer axle is specific to bikes that have the Focus R.A.T. thru-axle system with Boost 148 x 12mm hub spacing. - This axle is compatible with Burley, Carry Freedom, Chariot/Thule, Croozer, Instep, and many more hitch-style trailers. - The axle shaft and axle end are precision CNC-machined. - The axle shaft is 7075 aluminum and hard black-anodized for rugged durability. - The stainless steel axle end allows for mounting of the hitch provided with your trailer. The threads are M10x1 (metric). - Hardware for attachment of the hitch is included; the hitch, itself, is not. - No special tools required. Design allows for wheel installation and removal using your standard 5mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world.

Thule's Internal Hub Hitch Adapter enables you to attach a bicycle trailer conversion kit (sold separately) to bicycles with an internally geared hub.

Thule's Axle Mount ezHitch enables you to attach any Thule bicycle trailer or bicycle compatible child carrier (sold separately) to the rear axle of your bike.

Thule's Bike Trailer Thru-Axle Adapters replace your 12mm rear thru-axle to let you connect your bike trailer to the bicycle.

The Trailer Yoke is for use with the Journey Trailer TX. It allows you to quickly and easily use the trailer on multiple bikes without needing to swap over the yoke.

- Essential if you have more than one child that will be towed - Permanently install a head on each bike that you'll be towing throughout the riding season.

This kit allows the Trail-Gator Bicycle Tow Bar to be used with more than one adult bike. Adult riders can take turns towing a single child's bike, giving both adults a chance to join in on the fun. The kit includes all hardware that is mounted to the adult bike. A quick release is also included in this kit. This kit is optional and is only needed when transferring the tow bar from one adult bike to another adult bike.