Parts & Accessories
Thule's Axle Mount ezHitch enables you to attach any Thule bicycle trailer or bicycle compatible child carrier (sold separately) to the rear axle of your bike.
Thule's Internal Hub Hitch Adapter enables you to attach a bicycle trailer conversion kit (sold separately) to bicycles with an internally geared hub.
This part connects the trailer with a square tow bar to the hitch. It attaches inside the tow bar and locks in place inside the hitch using a retaining pin (Standard Forged Hitch & Steel Hitch) or bolt and nut (Classic Hitch). This flexible connector can stretch easily to allow the rider to lay down the bike. Includes safety strap with retaining pin for use with the Standard Forged Hitch or Steel Hitch. If being used with the Classic Hitch the Classic Hitch Safety Strap (part 950067) will also need to be purchased.
$174.15 - $199.99
The perfect way to get more out of your Burley, the Jogger Kit converts your Solo trailer to a jogger. This kit makes it easy for families to keep fit on the run. Compatible with the Solo (2007-Current)
$39.99 - $179.00
The Steel Hitch provides the critical connection from your Burley Trailer to your bicycle. The hitch installs easily on the rear skewer of your bike, and then stays attached so the Burley can be connected at any time. If you’d like to swap the Burley from bike to bike, pick up a couple spare hitches and install them on the extra bikes so the hitch doesn’t need to be un-installed when swapping bikes.
At Burley, we want to make sure that everybody has the opportunity to take a trailer with them on every adventure. The Burley Thru Axle is our solution to bikes equipped with a 12mm thru axle. Male threading on the end allows a hitch to be attached, and any Burley trailer can then be used with a thru axle bike. Features: - Official Burley adapter for bikes with 12mm thru axles - External male threading to accommodate the installation of our axle mounted hitch system - Quick and easy one-time installation
• 4 times greater strength • Fits seatposts from 25.4mm to 35.0mm • Retro fittable to all 15mm block, horizontal pin style Trail-a-Bikes • Fits late 1998 to present • Comes with 4 shims
Widen your 66-inch Yakima RackandRoll trailer by 13-inches with this 78 Crossmember Kit. With 78-inch crossbars you can carry wider loads, such as two 36-inch beam canoes or up to seven kayaks! - Comes with two 78” Crossmembers and two 78” Yakima Crossbars
Convert the standard tongue on your Yakima RackandRoll trailer to allow for longer boats. - Adds three feet onto the tongue of any Yakima RackandRoll trailer - Allows you to carry up to a single 22 ft. boat or two 21 ft. boats, depending on the vehicle hitch and boat positions
- For iGo Turbo and iGo Blast - Can be added to any seat with the use of four plastic clamps - The canopy front has zippers and can be rolled up for use on warmer days
The Trail-Gator Spare receiver Kit Headtube Attachment is a must-have if your Trail-Gator is going to be used on multiple children's (rear) bicycles. Makes swapping between bikes a snap. - Spare seatspost attachment (for the children's bike) for the Trail-Gator tow bar - Fits all Trail-Gator models including the 640020-640022-640023 - Allows the Trail-Gator to be attached to multiple juvenile bicycles quickly - Fits headtube up to 45mm (1.75")
- Axle Kit for Journey Trailer TX - Compatible with 12mm rear thru-axles under 180mm in length - Note: Choose the correct thread pitch, 1.0 / 1.5 / 1.75mm, to match your thru-axle
Yes! A 12mm thru-axle adapter for BOB Trailers. These Robert Axles for BOB Trailers are specifically engineered to attach the proven BOB Trailer to your thru-axle-equipped bike. Take full advantage of your modern bike with 12mm thru-axles and harness the rigidity of the thru-axle to haul your BOB Trailer. Set out on any adventure, big or small. Great for off-road tours, trail building, hauling cargo, and more! - The axle shaft and axle end are precision CNC-machined. - The axle shaft is 7075 aluminum and hard black-anodized for rugged durability. - The axle ends are stainless steel which allows for mounting of the BOB Trailer bobbins. - No special tools required. The design allows for wheel installation or removal using your standard 5mm hex wrench. - Please note: This axle does not come with the BOB Trailer bobbins (those are available separately). Or, you can reuse your bobbins from the stock BOB Trailer Quick Release that came with your trailer. - Designed, built, and quality tested in the USA. Proven around the world.
Purchase our Kid Trailer axle for your bike, and share your stoke for cycling with your kids. Simplify your life by allowing quick and secure attachment of your trailer to your best and favorite bike. Enjoy the adventure. Robert Axles for Kid Trailers are designed specifically to fit your 12mm thru-axle bike and allow attachment of any hitch-mounted trailer. These fit any trailer that has two wheels and a single point of attachment to the axle. This includes all the two-wheeled child, pet, and cargo trailers such as Thule, Chariot, Burley, Instep, Carry Freedom, and many more. - The axle shaft and axle end are precision CNC-machined. - The axle shaft is 7075 aluminum and hard black-anodized for rugged durability. - The stainless steel axle end allows for mounting of the hitch provided with your trailer. - Hardware for attachment of the hitch is included; the hitch, itself, is not. - No special tools required. Design allows for wheel installation and removal using your standard 5mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world.
- 4 piece sleeve set for Adams Trail-A-Bikes - Includes new shim for oversized seatposts that fits 25.4mm to 35.0mm and beyond
- QR Locking Hitch Pin for Adams Trail-A-Bikes
This part connects the trailer with a round tow bar to the hitch. It attaches inside the tow bar and locks in place inside the hitch using a retaining pin (Standard Forged Hitch & Steel Hitch) or bolt and nut (Classic Hitch). This flexible connector can stretch easily to allow the rider to lay down the bike. Includes safety strap with retaining pin for use with the Standard Forged Hitch or Steel Hitch. If being used with the Classic Hitch the Classic Hitch Safety Strap (part 950067) will also need to be purchased.
Page 1 of 1