Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Tools

$2.00
Replacement threaded cap for Abbey Hanger Alligment Gauge Tool.
$24.00
Replacement shaft for Micro Bearing Press - 1/4" shaft diameter - 12" length
$25.00
The soft face on the Titanium Hammer is destined to be gouged, get worn down, or even melt (if you leave it near heat). Replacement soft face for Abbey Titanium Hammer.
$30.00
Replacement pins, these are original equipment chain pins for our chain tool, they also work as an alternate to the Campagnolo UT-CN300 11spd chain tool, Shimano CN-34 and CN-32 Sold in pairs.
$30.00
Replacement feeler gauge for the Abbey Hanger Alligment Gauge Tool.
$30.00
For use with 1/4" Micro Bearing Press Shaft
$30.50
The soft face on the Shop Hammer is destined to be gouged, get worn down, or even melt (if you leave it near heat). Replacement soft face for Abbey Shop Hammer.
$45.00
For use with 1/2" Micro Bearing Press Shaft
$45.00
Replacement 6/8mm Hex bit for both the Abbey BBQ Wood Handled Pedal Wrench and the Team Issue Pedal Wrench.
$59.50
1/8" mid plate, needed to use the Decade chain tool with wide 1/8" track and single speed chains.
$78.00
This tool makes dust wiper installation an easy task. Drivers are made in diameters specific to stanchion sizes for most modern forks including 32, 34, 35, 36, 38, and 40mm. The Fork Seal Press is built with modern tight fitting fork seals in mind. Using a common handle with a stainless steel striking surface to give excellent durability when setting seals with a mallet. The handle provides ample clearance for your hand around the fork crown while allowing a good grip to seat the seal. The Delrin drivers are built to use the upper fork bushing as a guide. Making sure the seal goes in square the first time, every time. *** Note, these drivers are designed to be used with our handle, hitting them directly with a hammer can cause failure and will not be covered under warranty.
$78.00
This tool makes dust wiper installation an easy task. Drivers are made in diameters specific to stanchion sizes for most modern forks including 32, 34, 35, 36, 38, and 40mm. The Fork Seal Press is built with modern tight fitting fork seals in mind. Using a common handle with a stainless steel striking surface to give excellent durability when setting seals with a mallet. The handle provides ample clearance for your hand around the fork crown while allowing a good grip to seat the seal. The Delrin drivers are built to use the upper fork bushing as a guide. Making sure the seal goes in square the first time, every time. *** Note, these drivers are designed to be used with our handle, hitting them directly with a hammer can cause failure and will not be covered under warranty.
$83.99
This tool makes dust wiper installation an easy task. Drivers are made in diameters specific to stanchion sizes for most modern forks including 32, 34, 35, 36, 38, and 40mm. The Fork Seal Press is built with modern tight fitting fork seals in mind. Using a common handle with a stainless steel striking surface to give excellent durability when setting seals with a mallet. The handle provides ample clearance for your hand around the fork crown while allowing a good grip to seat the seal. The Delrin drivers are built to use the upper fork bushing as a guide. Making sure the seal goes in square the first time, every time. *** Note, these drivers are designed to be used with our handle, hitting them directly with a hammer can cause failure and will not be covered under warranty.
$83.99
This tool makes dust wiper installation an easy task. Drivers are made in diameters specific to stanchion sizes for most modern forks including 32, 34, 35, 36, 38, and 40mm. The Fork Seal Press is built with modern tight fitting fork seals in mind. Using a common handle with a stainless steel striking surface to give excellent durability when setting seals with a mallet. The handle provides ample clearance for your hand around the fork crown while allowing a good grip to seat the seal. The Delrin drivers are built to use the upper fork bushing as a guide. Making sure the seal goes in square the first time, every time. *** Note, these drivers are designed to be used with our handle, hitting them directly with a hammer can cause failure and will not be covered under warranty.
$83.99
This tool makes dust wiper installation an easy task. Drivers are made in diameters specific to stanchion sizes for most modern forks including 32, 34, 35, 36, 38, and 40mm. The Fork Seal Press is built with modern tight fitting fork seals in mind. Using a common handle with a stainless steel striking surface to give excellent durability when setting seals with a mallet. The handle provides ample clearance for your hand around the fork crown while allowing a good grip to seat the seal. The Delrin drivers are built to use the upper fork bushing as a guide. Making sure the seal goes in square the first time, every time. *** Note, these drivers are designed to be used with our handle, hitting them directly with a hammer can cause failure and will not be covered under warranty.
$83.99
This tool makes dust wiper installation an easy task. The Fork Seal Press is built with modern tight fitting fork seals in mind. The handle provides ample clearance for your hand around the fork crown while allowing a good grip to seat the seal. The Delrin drivers are built to use the upper fork bushing as a guide. Making sure the seal goes in square the first time, every time.
$86.50
This simple tool is designed to remove and install the static bearing in the shock ends of many modern rear shocks. Machined from durable stainless steel this compact tool allows the user to remove and install the DU bushings without resorting to hammers and punches. The coarse acme thread keeps the constant turning to a minimum.
$89.50
This dedicated socket is built to engage all 4 of the holes on a SRAM dub crank arm dust cap. These caps don't normally need to be removed but when you do need to work with them, few things work well. These tools feature a common 3/8" square drive like the rest of our socket range and also have a hexagonal exterior so you can mount them in a vise and use the crank arm as the lever if so desired. The sockets are also marked for the left hand thread (clockwise to loosen) this part uses. Compatible with all SRAM dub cranks, road/mountain/gravel.
$104.00
The lever setter is a unique tool that works in conjunction with our HAG (or other hanger allignment tool) to set brake and shifter levers at the same height from side to side. The tool temporarily replaces the headset top cap and allows you to thread a hanger alignment tool into the lever setter. Use the HAG indicator to set levers the same from one side of the bar to the other. Once you're satisfied with your lever placement simply remove the tool and replace your headset top cap and go ride. Compatibility: Requires a star nut or compression plug with a M6x1 thread. Works with road and mountain shifters and brake levers. Compatible with most hanger alignment tools on the market. Recommendations: It's advised to use a spacer on top of the stem to help align the lever setter with the steer tube. This will reduce the impact the quality of the cut on the steer tube has on the function of the tool. The supplied threaded stud can be replaced with a longer one if needed.
$105.99
The Shimano Crank Tool (SCT for short) is specifically built to service the chainring lockring on Shimano single ring cranksets for 12 speed drivetrains. It features a large hex that can be used with a 1.5" or 38mm wrench or locked into a vise. The clearance hole is kept to a minimum to keep the tool engaged on the low profile lockring, minimizing the chance of damaging the tool or parts. Compatibility: - Chain ring lockrings on Shimano 12spd mountain crank sets. - XT and Ultegra bottom brackets
$115.50
The Abbey Bike Tools 4-way precision multi-tool is the perfect choice to carry with you while on a ride. We designed this beautiful green anodized tool to fit into a compact saddle bag, riding wallet, or tuck into a jersey pocket. Everybody makes a multi-tool and there's a little bit of everything on the market, so what's different about ours? All of the little things that add up to one nice little tool. A multi tool is only as good as it's tool engagement so that's where we started. If you're familiar with other Abbey tools you've no doubt noticed that they fit tighter than anything else out there and this one is no different. We use precision stainless steel bits that fit like a glove into the bolts on your modern bike. They wont strip out fasteners like the cheap offshore made tools that are so common in the bike world. They also won't rust into a ugly brown color after a season in a saddle bag. The next part of the multi-tool is the chassis, for this we used our favorite US drawn aluminum alloy and built a 4 position frame to hold the bits. At first glance the tool looks like it might be cumbersome but once you get it in your hand you realize how simple and effective the ergonomics of the tool are. Offering good leverage for all of the small fasteners on your bike, be it the precision adjustment of limit screws or adjusting the handle bars because you had one beer too many when you bolted them down late last night. Available in 5 pre-configured options or fully customizable to fit whatever mix of fasteners your bike requires. We suggest buying a tool for each of your bikes and leaving the tool stored away until needed. These little multi-tools are the result of a collaboration with fellow Bend OR residents, Argonaut Cycles and is the only American manufactured multi-tool for the bicycle market.
$115.50
The Abbey Bike Tools 4-way precision multi-tool is the perfect choice to carry with you while on a ride. We designed this beautiful green anodized tool to fit into a compact saddle bag, riding wallet, or tuck into a jersey pocket. Everybody makes a multi-tool and there's a little bit of everything on the market, so what's different about ours? All of the little things that add up to one nice little tool. A multi tool is only as good as it's tool engagement so that's where we started. If you're familiar with other Abbey tools you've no doubt noticed that they fit tighter than anything else out there and this one is no different. We use precision stainless steel bits that fit like a glove into the bolts on your modern bike. They wont strip out fasteners like the cheap offshore made tools that are so common in the bike world. They also won't rust into a ugly brown color after a season in a saddle bag. The next part of the multi-tool is the chassis, for this we used our favorite US drawn aluminum alloy and built a 4 position frame to hold the bits. At first glance the tool looks like it might be cumbersome but once you get it in your hand you realize how simple and effective the ergonomics of the tool are. Offering good leverage for all of the small fasteners on your bike, be it the precision adjustment of limit screws or adjusting the handle bars because you had one beer too many when you bolted them down late last night. Available in 5 pre-configured options or fully customizable to fit whatever mix of fasteners your bike requires. We suggest buying a tool for each of your bikes and leaving the tool stored away until needed. These little multi-tools are the result of a collaboration with fellow Bend OR residents, Argonaut Cycles and is the only American manufactured multi-tool for the bicycle market.
$115.50
The Abbey Bike Tools 4-way precision multi-tool is the perfect choice to carry with you while on a ride. We designed this beautiful green anodized tool to fit into a compact saddle bag, riding wallet, or tuck into a jersey pocket. Everybody makes a multi-tool and there's a little bit of everything on the market, so what's different about ours? All of the little things that add up to one nice little tool. A multi tool is only as good as it's tool engagement so that's where we started. If you're familiar with other Abbey tools you've no doubt noticed that they fit tighter than anything else out there and this one is no different. We use precision stainless steel bits that fit like a glove into the bolts on your modern bike. They wont strip out fasteners like the cheap offshore made tools that are so common in the bike world. They also won't rust into a ugly brown color after a season in a saddle bag. The next part of the multi-tool is the chassis, for this we used our favorite US drawn aluminum alloy and built a 4 position frame to hold the bits. At first glance the tool looks like it might be cumbersome but once you get it in your hand you realize how simple and effective the ergonomics of the tool are. Offering good leverage for all of the small fasteners on your bike, be it the precision adjustment of limit screws or adjusting the handle bars because you had one beer too many when you bolted them down late last night. Available in 5 pre-configured options or fully customizable to fit whatever mix of fasteners your bike requires. We suggest buying a tool for each of your bikes and leaving the tool stored away until needed. These little multi-tools are the result of a collaboration with fellow Bend OR residents, Argonaut Cycles and is the only American manufactured multi-tool for the bicycle market.
$115.50
The Abbey Bike Tools 4-way precision multi-tool is the perfect choice to carry with you while on a ride. We designed this beautiful green anodized tool to fit into a compact saddle bag, riding wallet, or tuck into a jersey pocket.
$115.50
The Abbey Bike Tools 4-way precision multi-tool is the perfect choice to carry with you while on a ride. We designed this beautiful green anodized tool to fit into a compact saddle bag, riding wallet, or tuck into a jersey pocket. Everybody makes a multi-tool and there's a little bit of everything on the market, so what's different about ours? All of the little things that add up to one nice little tool. A multi tool is only as good as it's tool engagement so that's where we started. If you're familiar with other Abbey tools you've no doubt noticed that they fit tighter than anything else out there and this one is no different. We use precision stainless steel bits that fit like a glove into the bolts on your modern bike. They wont strip out fasteners like the cheap offshore made tools that are so common in the bike world. They also won't rust into a ugly brown color after a season in a saddle bag. The next part of the multi-tool is the chassis, for this we used our favorite US drawn aluminum alloy and built a 4 position frame to hold the bits. At first glance the tool looks like it might be cumbersome but once you get it in your hand you realize how simple and effective the ergonomics of the tool are. Offering good leverage for all of the small fasteners on your bike, be it the precision adjustment of limit screws or adjusting the handle bars because you had one beer too many when you bolted them down late last night. Available in 5 pre-configured options or fully customizable to fit whatever mix of fasteners your bike requires. We suggest buying a tool for each of your bikes and leaving the tool stored away until needed. These little multi-tools are the result of a collaboration with fellow Bend OR residents, Argonaut Cycles and is the only American manufactured multi-tool for the bicycle market.
$144.00
We listened to your requests and created a socket style Crombie tool that is compatible with ratchets and torque wrenches. The Socket Crombie has our signature finger spline at the top along with a 3/8" square drive for using your favorite ratchet or torque wrench. The tool is plenty deep to hide a quick release and still get full engagement on the lock ring. Compatible with all Campagnolo cassettes.
$202.00
The Charger 2 wrench is designed for use on the lower seal head of Charger 2 and Charger LT dampers. This series of wrenches comes as a result of our collaboration with RockShox to develop a series of tools specifically for their suspension components. Built to hold the thin aluminum parts of the dampers to avoid damage. These wrenches are built with the same tool grade aluminum to tight tolerances to give you years of trouble free use. They will not damage or mar the sensitive parts inside your suspension fork when used with care, keeping you and your customers happy. They also feature a 3/8" square drive in the middle to use with your favorite torque wrench during reassembly.
$202.00
The Reverb is an advanced and complicated component and service becomes a breeze with this speciality wrench. Designed for use on the inner seal head and upper collet of both 30.9 and 31.6 millimeter version of the Reverb dropper post. This series of wrenches comes as a result of our collaboration with RockShox to develop a series of tools specifically for their suspension components. Built to hold the thin aluminum parts of the dampers to avoid damage. These wrenches are built with the same tool grade aluminum to tight tolerances to give you years of trouble free use. They will not damage or mar the sensitive parts inside your seastpost when used with care, keeping you and your customers happy. They also feature a 3/8" square drive in the middle to use with your favorite torque wrench during reassembly.
$297.50
The unique thing about our Saw Guide is that the clamp is open, so you can slide it around the steer tube instead of having to slide it over the end. It doesn't sound like that big of a deal but it means you can get an accurate and square cut without taking the fork off the bike and more importantly without taking all the cables out of the bike. Use this tool once for that application and it's paid for itself. Of course it will work on normal steer tubes as well and give you a nice square cut every time. The guide is two sided, one side for standard toothed metal cutting blades and the opposite side is wider for abrasive blades used to cut composites. You can also use the guide in a vise like you're probably use to and it's pretty compact if you want to travel with it. Compatible with 1" and 1.125" steer tubes Currently not compatible with cutting handlebars!
$361.99
With a 15mm box end on one end and a custom 6 and 8 millimeter swivel bit on the opposite end, it's the only pedal wrench you'll ever need. Perfect to keep at the fit station, on the sales floor, and at the tool bench. The shop version of the tool gets an extra 6" (15cm) of leverage over the team issue for an overall length of 18 inches. Great for removing those stubborn pedals. - Durable black Cerakote finish - Made in Bend, Oregon
$430.00
Many athletes are fortunate enough to be able to ride nearly anything. For those that are sensitive to bike fit though, replicating fit to a new bike or confirming fit after travel can be a challenge involving lots of trial and error. This set of tools allows accurate and repeatable measurements for saddle height, angle and setback. The accuracy and repeatable measurements also serve as a base to make adjustments to fit. -The magnetic saddle height bullets ensure you get an accurate center at the BB by locating in the crank arm fixing bolt or the crank arm preload cap of Shimano caps. This allows you to focus on the smart end of the tape measure at the saddle plate. -Two reference marks on the saddle plate means you can pull a measurement to the exact same spot relative to the nose of the saddle every time. This gives you accuracy down to a single millimeter. -The front of the saddle plate is engraved with a ruler, to allow you to calculate saddle setback at the saddle. This allows you to drop the plumb bob off the side of the bike and clear all of the bottle cages. -The wide plate has ample room to mount a level, protractor or smart phone for adjusting the angle of the saddle. This is particularly helpful for non traditional saddles like SMP and Adamo.
$729.99
This dishing gauge is fully machined from big billets of aluminum to a final shape and accuracy that's as nice to use as it is to look at. Compatible with wheels from 20-29 inches and all hub combinations. Standoff feet are included for checking dish with the tire in place, even the big fat ones. The gauge uses a unique spring-loaded mechanism to drop the plunger. Press that little brass button on the front and the plunger will drop to the face of the hub. No archaic time-sucking threaded indicators here!
$6.00
Brake pad spreader tool for Avid Elixir brakes.
$138.00
SRAM Bleed Kit for maintaining SRAM disc brakes. Includes 2 syringes/fittings, bleed blocks, Torx tool, Crow's foot, and Bleeding Edge Fitting. - For SRAM X0/ XX/ Guide/Level/Code/HydroR brakes - Improved sealing and durability - New rotating metal hose fittings - High volume hose with clamp - Longer lasting - Must-have for all mechanics - NOT compatible with RockShox fork bleed kit - Brake fluid sold separately
$8.49
This item contains 10 replacement plugs for the Blackburn Plugger Tubeless tool (sold separately), a one-shot tire plugging system for tubeless tires. It deploys in seconds to give a permanent fix for your flat.
$15.99
Essential tool in mini size An essential tool for modern riders with tubeless tires, road or dirt. The Mini Plugger is a quick, one-shot tire-plugging system with a tiny profile to easily store and access in pockets, bags, or packs. A self-contained rescue tool when and where you need it most. - QUICK FIX - No need to remove the tire, just quickly access your Plugger tool, repair the tire, inflate, and go! - 5 PLUGS - Includes 5 tire plugs, internally stored - LIFETIME WARRANTY
$24.99
Essential tools in mini size The Mini-Switch is an essential tool kit with a slim profile to easily store and access in pockets, bags, and packs. Outfitted with a technical bit offering appropriate for most performance-oriented bikes, in a tool bit platform that we are all used to using at home. - 6 TOOLS - Top six tools for most modern bikes. 3mm, 4mm, 5mm, 6mm, Allen bits and T25, T30 Torx bits - HEX BITS - Easy to switch out tools. A durable, time-proven, six-sided bit design - LIGHTWEIGHT - Extremely light and compact tool set that's unnoticeable while riding - LIFETIME WARRANTY
$25.99
8 functions—we've gone out of our way to pack this tool with as many useful functions as humanly possible. The selection, length, and placement of each tool has been carefully thought out so that you have the right tool and can easily use it. - 110 grams
$34.99
13 functions—we've gone out of our way to pack this tool with as many useful functions as humanly possible. The selection, length, and placement of each tool has been carefully thought out so that you have the right tool and can easily use it. - 13 functions - 145 grams
$39.99
Those guys who said "Tubeless tires never get punctures"? They lied. The Blackburn Plugger Tubeless Tire Repar Kit is a quick, one-shot tire plugging system for tubeless tires. It deploys in seconds to give a permanent fix for your flat. Mount it to your frame, tape it to your top tube, or strap it to your ankle like a shark knife. Just keep it close and it'll get you out of trouble. Pronto. - Stores ten plugs. - 27g tool only 47g tool with strap
$49.99
The Switch Tool has evolved. We've all heard "if it ain't broke, don't fix it", but what if riders just want to fix more things? Enter the Big Switch, the larger sibling to the hit Switch tool. This new, compact, and super functional tool kit includes essentials you’ll find on the Switch including T25 and T30 torx bits, 2.5, 3, 4, 5, and 6mm allen bits, and a flathead screwdriver. The Big Switch also features an 8mm hex tool, and a chain breaker. The chain breaker handle includes size 0, 1, and 2 spoke wrenches, a disc pad spreader and a Presta valve core tool. Individual T or L handle tools let you access tight places and give you more leverage on bolts and screws. Go ahead, fix everything. - 15 functions - Includes T or L handle wrenches. - Tool bits include: T25, T30, 2.5mm, 3mm, 4mm, 5mm, 6mm, 8mm, and a flathead. - Pocket sized nylon carrying pouch includes a stash for your I.D., credit card, and cash. - 134g
$59.99
Customize the Switch Wrap Bag and load it up with your favorite tools. - Compact design—despite its near-limitless functionality, the big switch ratchet tool (sold separately) fits compactly in your hand thanks to a well-thought-out modular design allowing for leverage within the confines of a portable nylon wallet. - Customizable—wrap almost anything you need and take it with you. - Features specific sleeves for an inner tube, a 20g C02 cartridge, 2 tire levers, credit cards, and cash (sold separately) - Weight: 3.52oz - Lifetime warranty
$59.99
Remember that time on the trail when your brake lever reach went out of whack? Unfortunately, your multi tool couldn't get out of it's own way to turn the adjustment screw. Blackburn's Wayside Multi Tool changes all of that. - Individual Hex Keys - The most common hex keys snap on and off the tool and can be used individually to be able easily reach and properly torque any bolt head. All keys feature a ball end. - Optimized Tools - The selection, length and placement of each tool has been carefully thought out so that you have the right tool and can easily use it. - 19 functions - 200 grams / 0.44 lbs
$74.99
Imagine if you could bring a tool box with all the essentials you’d need for bicycle maintenance with you on every ride. Well then, stop dreaming: the Blackburn Switch Wrap is already here. Spec’d with their Big Switch multi tool, the Switch Wrap provides you quick access to everything you’ll need to fix just about anything that could go wrong on a ride. The Wrap features specific sleeves for an inner tube, up to a 20g CO2 cartridge, and a tire lever. And, it keeps the Big Switch tools at your fingertips. When opened, the tool kit hangs from your saddle so you can grab what you need without spreading it all on the ground, so lost tools will only exist in nightmares. Minimal. Compact. Secure. Convenient. The Switch Wrap. - 15 functions - Includes T or L handle wrenches. - Tool bits include: T25, T30, 2.5mm, 3mm, 4mm, 5mm, 6mm, 8mm and a flathead. - Nylon carrying pouch features sleeves for 20g CO2 cartridge, tire lever and includes a stash for your I.D., credit card and cash. - Attaches to seat rails or to bicycle frame. - 186g
$79.99
Your race mechanic on the go. Just because it's scaled down from a full-size ratchet doesn't mean it skimps on performance. The Big Switch Ratchet Tool takes the same simple necessities from the popular Switch and Big Switch and adds a convenient, ratcheting handle for even quicker, hassle-free adjustments. Extra-long 2.5 through 8mm Allen bits take care of business, along with T25 and T30 Torx, the renowned Wayside chain breaker, 0, 1, and 2 spoke wrenches, a disc-pad spreader, flathead, and a Presta valve core tool. You're covered. Fully covered. - Includes: T25, T30 Torx bits, extra-long 2.5, 3, 4, 5, 6, 8mm Allen bits, flathead screwdriver, wayside chain breaker, size 0,1, 2 spoke wrenches, disc pad spreader, Presta valve core tool
$99.99
Ride essentials. Going for a ride but don’t know what to pack? No problem; we’ve got you covered. The local ride kit offers up what you need to get home; and extra carrying capacity to bring along anything else. With a seatbag, mini pump, mini tool and tire levers, this little kit, bundled in a compact package, has all the tools you need to get out there and keep going. - Blackburn's Local Seat Bag (Medium) offers extra space to pack your tube, wallet, phone, or whatever you want - Blackburn Heist 6 Multi Tool provides a quality tool to make sure your bike is adjusted properly for your ride - Blackburn's Mountain AnyValve Mini-Pump comes equipped with their popular and proven AnyValve head, which works on Presta, Schrader, and Dunlop valves. - 2x tire levers
$129.99
Going for a ride but don't know what to pack? No problem, Blackburn has you covered. The new Local CO2 Ride Kit offers up what you need to get home, and extra carrying capacity to bring along anything else. - Local Small seat bag offers extra space to pack your tube, wallet, phone, or whatever you want - Wayside CO2 inflator with 16g cartridge - GRID 8 Mutli-tool provides a quality tool to make sure your bike is adjusted properly for your ride - 2x tire levers
$129.99
Take greatness, add more = more greatness. The simply stellar Pro Plugger gains a few extra ingredients for surefire success, the it-makes-sense CO2’FER head combining an inflator and valve tool along with a 25g threaded CO2 and universal frame-mounting kit, mean everything’s always within reach, even on bikes with long reach. No need to scurry about rounding up odds and ends trying to beat dwindling daylight—simply grab bike, go and you’re already equipped with the Pro Plugger Combo’s on-bike tubeless repair system. - Pro plugger rubber mount, strap, core CO2 inflator and 25g threaded CO2 included - 4.64oz
$129.99
Securely stow a multi-tool, chain breaker, and master link in your fork’s steerer tube for quick and easy access when you need it. Securely stow your essential trail toolkit in your fork’s steerer tube with this clever integrated storage solution. The compression fitting replaces a traditional MTB fork's star nut and keeps an included multi-tool and more cleanly out of sight, yet always at the ready—and it doesn't require you to thread your fork! Product details - Easy tool access for quick trailside repairs - Bolted compression system securely holds tool and carrier - Compression install replaces the star nut fitting with no need to thread fork - Simple install with two bolt lengths and included spacers for customizing fit - Includes BITS Multi-Tool with hex keys, screwdriver, chain breaker, and storage for quick links - 2, 2.5, 3, 4, 5, 6, and 8mm hex along with T25 and flat-head screwdriver - Compatible with MTB forks with threadless headsets and non-carbon steerer tubes - Not compatible on forks with oval internal steerer tube shapes like the Fox 38
$139.99
Product details - A professional-grade tool developed in partnership with Knipex and made to last - 7.5"/190mm length provides high leverage with minimum effort - Made from heavy-duty steel and additional induction hardening for tough, continuous use - Made in Germany - Features an integrated class-leading crimper for cable end caps and housing ferrules
$174.99
Bontrager Pro Ratchet Multi-Tool delivers professional quality in a small, light, and portable package. A 72-tooth micro-ratchet and Swiss S2 steel bits provide unmatched precision for adjustments in the workshop or on the road. The modular design offers clever configurations that make access to any bolt a breeze, and even includes an integrated torque setting. And it all wraps up in a classy case that keeps everything in its place. - Precision ratchet with convertible magnetic extension - 12 function - 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, T10, T20, T25, #2 Phillips, steel bit extender - Ti-Torque beam for measuring 2-8Nm with live readout - Duck waxed canvas carrying case measuring 120mm x 70mm x 30mm
$56.00
Everything you need to keep your Penthouse Flat MK5 pedals feeling like new. Includes: - Small Bushing and Bearing Removal Tool - Small Bushing Press Tool - Big Bushing Press Tool - Bearing Press Tool
$30.00
- Spare pin for UT-CN200 and UT-CN300
$24.99 - $26.99
When you are installing headset cups into your bicycle frame or a crown race onto your fork, there is only one way to get the job done right. Use an appropriately-sized Cane Creek installation tool, or risk damaging your frame and/or fork. The headset cup installation tools are designed to be used with a headset press, sold separately.
$52.49
Service Kit for servicing your eeSilk or eeSilk+ seat post. The kit includes bushings for the arms and the tool to remove and install the bushings. Instructions included.
$65.99
Service kit for Cane Creek suspension forks.
$69.99
Allows safe installation and removal of Cane Creek Double Barrel bushings.
$20.99
The ultimate trailside companion. This high-tensile steel multi-tool features a precise fit and finish and side grips for a secure handhold even with gloves on. The M5 includes: Hex wrenches: #3, 4, 5, 6 Screwdrivers: Phillips #2 Length: 89mm Weight: 85g Warranty: Lifetime
$29.99 - $36.99
The ultimate trailside companion. These high tensile steel multi-tools feature a precise fit and finish and side grips for a secure handhold even with gloves on. The m10 includes: Hex wrenches: #2, 2.5, 3, 4, 5, 6, 8 Screwdrivers: Phillips #2, flat #2 Torx: t-25 Length: 89 mm Weight: 124g Warranty: Lifetime
$40.99
The ultimate trail-side companion. Details - 13 high tensile steel multi-tools, including an integrated tire plug tool - Tire plugs come included with a storage case that mounts directly to the tool - The case can be used to conveniently store chain links Specs - Hex Wrenches: #2, 2.5, 3, 4, 5, 6, 8 - Length: 89mm - Screw Drivers: Phillips #1 & #2, flat #1 - Specialty Tools: Tire plug tool, tire plugs - Torx: T-10, T-25 - Warranty: Lifetime - Weight: 164g
Page 1 of 15 Next page