Other

Your RideWrap Tailored Protection™ kit has the highest available coverage on the market thanks to a proprietary design process. Kits are tight to extremities and narrow seams are strategically located. RideWrap protection film is virtually invisible. Optically clear protection means your bike is the center of attention. RideWrap protection film is self-healing. Minor marks and scuffs will disappear with the warmth of a sunny day. RideWrap has a low surface energy and is hydrophobic. This means that less dirt sticks to your bike and it is easier to clean. RideWrap protection film has a 10 year warranty against yellowing and cracking. Designed, engineered and tested with proprietary technology in Whistler, BC. Please carefully confirm that this product is for the correct model, year, frame material, wheel size, and size. RideWrap Tailored Protection kits are specific to the features of the frame/fork. If you select anything other than your actual frame/fork, the protection kit will not fit.

Protect your eBike motor from dirt. - Protection engineered to keep your ride looking as good as new for years to come. - For use with Trek Super Commuter and Diamant Zouma+ models from Model Year 2018 and 2019 - Easy 4-bolt assembly - Bolts are excluded

• Disc brake adapter for NCS fenders • Makes NCS fenders better fit disc brake bikes

Easy apply the armor with the adhesive strip - For use with Trek Marlin+ - With very strong adhesive strip

Protection that's engineered to keep your ride looking good as new for years to come. - Designed for 2025 Top Fuel Gen 6 - Refer to the Service Manual for assembly & service instructions - For OE replacement purposes only - not intended for aftermarket

Keep your investment protected with durable armor designed specifically for your ride. Genuine replacement parts - Protection engineered to keep your ride looking as good as new for years to come. - Trek protective armor - Model-specific custom fit

Keep your investment protected with durable armor designed specifically for your ride. - Protection engineered to keep your ride looking as good as new for years to come. - Trek protective armor - Model-specific custom fit

U-Stay Mounting Clamp for Velo Fenders, Bluemels 75U and 75U Long, and Edge AL Fenders.

Carrying your bike has never looked so good. It's okay to take help every once in a while Attach to your seatpost and downtube to easily transport your bike up, down, and all around. As part of our Faux Leather collection, this bike carry handle helps you maneuver throughout the city. Product details - Fits pedal bikes and e-bikes - Includes two regular straps at 165mm long - Includes one long strap at 300mm long - Matching saddle, tool bag, and grips available

Flip chip to adjust the guard of the shield - Compatible with the Nock Handguards V2. - Work for both left and right shields. - Glass fiber reinforced polyamide

A fender extension for the FRX and Shorty fender. - Uses plastic pop rivets to fit, no drilling needed with the FRX - Ideal for using the Shorty on a 29er wheel, or making the FRX a whopping 555mm long (we recommend using four zipties on the fork legs to prevent the fender from moving) - Simple to fit and can be removed when not needed - Weight: 16g

Compatibility packs for the Aenomaly Switchgrade seat angle adjuster. Please see the Aenomaly site for full compatibility info.

- Screw-on end plugs for road handlebar - Same plugs as the ones included with the Classic Plus, Stylista, and Supergrip handlebar tapes

Fork Adapter for Suntour/RockShox Straight allows full fender or Velo fender stays to be mounted to the Suntour, RockShox, or other forks with unique mounting systems.

Fork Adapter for Suntour/RockShox Offset allows full fender or Velo fender stays to be mounted to the Suntour, RockShox, or other forks with unique mounting systems.

Replacement SKS Rubber Straps for RacebladePro and S-Board

- Custom brass headtube badge - Tough 3M adhesive backing - Fits most current frame headtubes

Rubber straps for Speedrocker, Mudrocker, and VeloFlexx. - Replacement only - Fenders include straps

Replacement sliding bridge clip for Chromoplastic Longboard and Commuter II fenders. The replacement clips are made of aluminum with an adjustable bottom so they can be clamped onto the fender. - The 35mm clip works with 35mm fenders. - The 45mm clip works with 45mm fenders. - The 55mm clip works with 50-55mm fenders. - The 65mm clip works with 65mm fenders.

Replacement sliding bridge clip for Bluemels fenders with a rounded profile. The replacement clips are made of plastic and feature a pivoting bridge clip which allows the fender to be secured either below the bridge or on the side of the bridge based on the rider's frame. - 35mm = item 11921 Fits Fender 11807 and 11808 - 45mm = item 11922 Fits Fender 11811 and 11812 - 53-60mm = item 11923 Fits Fender 11801, 11803, 1805, 11815 and 11816 - 65mm = item 11924 Fits Fender 11819 and 11820 - 69mm = item 11925 Fits Fender 11823 and 11828

Replacement sliding bridge clip for Bluemels STYLE fenders. The replacement clips are made of plastic and feature a pivoting bridge clip which allows the fender to be secured either below the bridge or on the side of the bridge based on the rider's frame. - 46mm = item 11926 Fits STYLE Fender # 11832 - 56mm = item 11927 Fits STYLE Fender # 11835 - 65mm = item 11928 Fits STYLE Fender # 11838 - 75mm = item 11929 Fits STYLE Fender # 11844

Replacement BB extender for the MK2 Rear Mudhuggers - Designed, made and packed in the UK from 100% recycled plastic - Trim the length and width to suit your needs

Share the Electra love. Be a part of the Electra pack. Sticker pack, that is. Slap 'em on your desk. Stick 'em all on your notebooks. Show off your bumper. Put the Electra mark anywhere… or add these to your sticker collection. Product details: - Set of 15 vinyl stickers - Authentic Electra designs

Greenfield's Kickstand attaches quickly and easily to most bicycles and provides a safe and convenient way to park your bikes at home and on the road and trail. It's also durable, lightweight, and looks great on any bike. Plus, it's made of a special non-corrosive aluminum and is built to last. You'll want one on all your bikes! - 285mm (for bikes 22" and under), 305mm (for bikes 22" and over) - For bikes without factory mounting plate (includes top plate and bolt) - Certified Non-Corrosive Casting - Snap Action Mechanism - Non-Slip Clamping Surface

Keep your investment protected with durable armor designed specifically for your ride. Genuine replacement parts - Protection engineered to keep your ride looking as good as new for years. - Trek protective armor - Model-specific custom fit

Keep your MTB operating smoothly with original replacement parts. - The right parts for the right bike. - Left & right pair with hardware included - Not backward compatible with the Bontrager Haru fork

Keep your investment protected with durable armor designed specifically for your ride. - Protection engineered to keep your ride looking as good as new for years to come. - Not compatible with Fuel EXe Aluminum - Refer to the Service Manual for assembly instructions and service

Protection that's engineered to keep your ride looking good as new for years to come. - Designed for Powerfly+ FS Gen 4 - Refer to the Service Manual for assembly & service instructions

Protection that's engineered to keep your ride looking good as new for years to come. - Designed for Powerfly+ HT Gen 5 - Refer to the Service Manual for assembly & service instructions

Protection that's engineered to keep your ride looking good as new for years to come. - Designed for 2025 Top Fuel Gen 6 - Refer to the Service Manual for assembly & service instructions